Grab Bar Series - Bradley Corp

1 812 grab Bar Series 2023 Box 309, Menomonee Falls, WI 53052-0309800 Bradley (800 272 3539) +1 262 251 composed of products indicated as BradEX will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from 1 of 2 6/15/2023 This information is subject to change without Latest Version1 " Heavy Duty Stainless Steel grab Bar with Concealed MountingProduct Materials FLANGES: 3Z\," dia. 13 gauge stainless : 22 gauge stainless steel. One-piece drawn construction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting : 1 " 18 gauge stainless steel, seamless construc tion with exposed surfaces in architectural satin finish. Bent ends of tubing pass thru the flanges and are welded for maximum strength. Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar. All exposed welds ground and polished to blend. Mandrel bending process maintains uniform bar diameter.

2 Return provides 1 " stan dard safety clearance between wall and When properly mounted, all Bradley heavy duty grab bar systems meet or exceed the requirements of ANSI Standard , the ADA and ABA Accessibility Guidelines for Buildings and Facilities (ADAAG), and the Uniform Federal Accessibility Standard (UFAS). Select dimensions of configurations are 3rd party tested to support up to 1000 pounds. See configurations on the following page. All other 812 grab bars outside of these parameters are rated to support up to 250 pounds. Wall must be reinforced in the area of the grab bar in order to support the load it is intended to SpecificationGrab bar shall be fabricated of stain finish stainless steel with concealed mounting flanges in sizes and configurations as indicated. Install with Bradley Mounting Kits as instructions on installation, warnings and maintenance, please visit ModelsConfiguration NumberShipping DataConfiguration NumberShipping DataCu. LbCu. Lb001-18" " " " " " " ** : These units must ship via common carrier.

3 ** 059: 40" x 52" Standard Dimensions.* 1 " wall clearance required under most building design codes* 1 " (38mm)Mounting holesFlange of 13 gauge stainless steelBar welded to flange for maximum strengthMandrel bending process maintains uniform bar diameter(No. 4) Satin finish will not scratch hands or catch dirtEscutcheon snaps over flange to conceal mounting screws18 gauge stainless steelFlange escutcheon \," (16mm)3 " (83mm)Standard finishSafety-Grip finishADA CompliantConsult local and national accessibility codes for proper installation and compliance to local and national codes is the responsibility of the finish-2 Antimicrobial finish: 1-1/2" - 001-18, 001-24, 001-36 & 001-42 only-AMconcealedOptional Features812 grab Bar Series 2023 Box 309, Menomonee Falls, WI 53052-0309800 Bradley (800 272 3539) +1 262 251 composed of products indicated as BradEX will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from 2 of 2 6/15/2023 This information is subject to change without Latest VersionOD1-1/2"Rating (LB)1000 Configuration NumberGrab Bar Length812 Series001-12 12"X001-1818"X001-2424"X001-3636"X001-48 48"X001-5454"X059/058up to 42" x 54"X05730" x 30"X05433" x 30"X05524" x 24"X 001 Model 812 - 54" Max Model 832 - 48" Max Model 852 - 24" MaxA specify 059 Opposite 058 (RH) "B" side will have "6"B=52" 057 30" x 30"B=30"A=30" 054 30" x 33"B=33"A=30"3" 055 24" x 24"B=24"A=24"120 Configuration Information - Bariatric ModelsBradEX Item - Standard FinishBradEX Item - Standard Finish or Safety Grip Finish (-2) 058(LH) "B" side will have "6"B=52"WARNING Only models/configurations listed on this page have been rated for use up to 1000 pounds.

4 Please see grab Bar Configurations on for all other available configurations.