GRaVItY seWeR - JM Eagle

1 GRaVItY seWeR . Meets astm d3034 and astm f679. Building essentials for a better tomorrow GRaVItY seWeR ASTM D3034. SDR 35 and SDR 26. Ring-Tite Joints 4" - 15". ASTM F679. PS46 and PS115. Ring-Tite Joints 18"- 36". GRaVItY seWeR . Contents 01 product description .. 2. 02 short form specification .. 5. 03 dimensions and weights .. 6. 04 flow/discharge charts .. 8. 05 external loads .. 10. 06 deflection and testing .. 13. 07 installation.. 17. 08 SHORT FORM INSTALLATION GUIDE .. 24. 09 WARRANTY .. 25. 01. Product Description GRaVItY seWeR pipe and fittings DESCRIPTION JM Eagle 's Quality Management System is ISO 9001: JM Eagle realizes the growing demand for an effective 2000 registered.

2 * Copies of the registration certificates all-out attack on water pollution, highlighting the need for are available on our website at improved sanitary sewage collection systems. A modern system needs pipe with improved design for reserve * JM Eagle is in the process of obtaining the ISO 9001- strength and stiffness to increase load-bearing capacity 2000 registration of Quality Management System for all within the framework of maximizing seWeR system all locations. capacity at a reasonable cost. JM Eagle 's Ring-Tite PVC. seWeR pipe is designed to meet this need. LONG LAYING LENGTHS. The standard laying lengths of Ring-Tite PVC seWeR pipe are 14 and/or 20 feet. This means that more ground can be covered during installation while eliminating the cost of unnecessary joints.

3 CORROSION RESISTANCE. JM Eagle 's Ring-Tite PVC seWeR pipe is unaffected by the fluids found in ordinary domestic sewage. It is immune to seWeR gases and the sulfuric acid generated by the com- pletion of the hydrogen sulfide cycle. It is also immune to corrosive soils both alkaline or acidic. APPLICATIONS. JM Eagle 's Ring-Tite PVC seWeR pipe is suitable for ABRASION RESISTANCE. conveying domestic sanitary sewage as well as certain JM Eagle 's Ring-Tite PVC seWeR pipe has excellent resis- industrial wastes. For further information regarding the tance to abrasion, gouging and scouring, superior to that suitability of PVC for conveying various chemicals, call our of most common piping materials.

4 Pro-duct Assurance Department at (800) 621-4404. FLOW CAPACITY. QUALITY CONTROL This PVC seWeR pipe 's long laying lengths, smooth inte- This pipe is tested in accordance with the provisions of rior, and factory-made close tolerance joints, provides ASTM D3034 and ASTM F679 and subject to inspection a Manning N coefficient of .009. High-carrying capac- by our quality control inspectors throughout every step of ity makes the use of flatter grades or smaller diameter the manufacturing process. pipe possible. 2 GRaVItY seWeR . SAVE IN HANDLING COSTS SERVICE LIFE. JM Eagle 's Ring-Tite PVC seWeR pipe is designed for Since PVC does not corrode and is resistant to most installed-cost savings.

5 Most sizes can be handled manu- chemicals, this pipe does not lose strength due to either ally, so there is no need for costly installation equipment. seWeR gas corrosion or external galvanic soil conditions. Use the backhoe for excavating and backfilling only. Dig The design of the pipe allows for a long-term deflection more trench, lay pipe faster, and save more in cost per of , without failure or damage. foot installed. INSTALLATION. FIELD CUTTING AND BEVELING This product should be installed in accordance with You can cut Ring-Tite PVC seWeR pipe with a power . JM Eagle Publication JME-05B, GRaVItY seWeR Insta- saw or an ordinary handsaw. This eliminates the need llation Guide.

6 To invest in costly cutting equipment. The pipe can also be beveled without the use of any expensive or compli- GRaVItY seWeR cated machinery. Available in 4" through 36" diameter sizes, this pipe can be connected directly to most existing seWeR LIGHT WEIGHT equipment. It can also be connected into , cast/. A 14 foot length of 8" SDR 35 Ring-Tite PVC seWeR pipe ductile iron pipe and fittings with adapters and/or tran- weighs approximately 55 pounds. That makes it easy to sition gaskets. load, easy to transport, and easy to handle. Installers prefer it because it goes into the ground quickly thus saving on installation costs. GRaVItY seWeR 3. Product Description (CONTINUED).

7 RING-TITE JOINTS WITH LOCKED-IN GASKETS ACCESSORIES. JM Eagle 's Ring-Tite joint can be assembled quickly. JM Eagle 's Ring-Tite PVC seWeR pipe is compatible with Seated in a deep groove, the flexible elastomeric Rieber * all the items required for smooth installation of seWeR and gasket provides a tight seal that protects the line from industrial waste pipelines. shock, vibration, earth movement, and compensates for expansion and contraction of pipe lengths. There's no field mixing or application of cement. It's a simple push together joint that remains tight under normal operating conditions. The factory installed Rieber gaskets provide a tight, flex- ible seal, that resists rolling during installation.

8 Special gasket types are available for use with certain chemical and petroleum products. Spigot pipe ends are supplied from the factory with bevels. The bell is an integral part of the pipe length with the same strength. Joints meet or exceed ASTM D3212 for joint tightness, including a 22 in. Hg vacuum and a 25 feet of Head Pressure test. Note: Other types of gaskets may be provided. JM Eagle is in the process of converting all gasketed products to the Rieber . ring gasket. * R ieber is a registered trademark of TI Specialty Products Inc. RING-TITE JOINT. Locked - in Rieber gasket provides tight, flexible seal. Meets requirements of ASTM. D3212-Joints for Drain and seWeR Pipes using Flexible Elastomeric Seals.

9 Spigot pipe ends are supplied from factory with bevels. The bell is an integral part of the pipe length with the same strength. 4 GRaVItY seWeR . 02. short form specification GRaVItY seWeR pipe and fittings scope pipe STIFFNESS. This specification designates general requirements for 4" Minimum pipe stiffness (F/ y) at 5% deflection shall be 46. through 36" unplasticized polyvinyl chloride (PVC) plastic psi for SDR 35 and 115 psi for SDR 26 for all sizes when GRaVItY seWeR pipe with integral bell and spigot joints for tested in accordance with ASTM D2412, External Loading the conveyance of domestic sanitary sewage as well as Properties of Plastic pipe by Parallel-Plate Loading.

10 Certain industrial wastes. Drop impact test MATERIALS. A 6" length section of pipe shall be subjected to impact All pipe and fittings shall meet the requirements of ASTM. from a free falling tup (20-lb Tup A and flat plate holder B. D3034 for 4" through 15" SDR 35/26 and F679 for 18". for 4"-15", and 20-lb or 30-lb Tup B and flat plate holder B. through 36" 46PS/115PS seWeR pipe . The pipe shall be for 18"-36") in accordance with ASTM D2444. colored green for in-ground identification as seWeR pipe . All pipe shall be made from quality PVC resin, compound- There shall be no ed to provide physical and mechanical properties that pipe size (in) impact (ft/lbs) visible evidence equal or exceed cell class 12454 or 12364 as defined in of shattering or 4 150.