GSM 11.11 - Version 5.0.0 - Digital cellular ...

1 New presentation - see History boxGSMGSM 1995 SPECIFICATIONV ersion : ETSI TC-SMGR eference: TS/SMG-091111 QICS: words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) Digital cellular telecommunications system (Phase 2+); specification of the Subscriber Identity Module -Mobile Equipment (SIM - ME) interface(GSM )ETSIE uropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEO ffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - : c=fr, a=atlas, p=etsi, s=secretariat - Internet: +33 92 94 42 00 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission.

2 The copyright and theforegoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 1995. All rights 2 GSM Version December 1995 Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title 3 GSM Version December 92 Normative 93 Definitions and 134 Physical and range for card of and 155 Electronic signals and transmission voltage Vcc (contact C1).. (RST) (contact C2).

3 Voltage Vpp (contact C6).. CLK (contact C3).. (contact C7).. To Reset (ATR).. and duration and sampling 206 Logical fixed for selecting a of file 257 Security and cipher key generation and access 26 Page 4 GSM Version December 19958 Description of the GSM 339 Description of the of the GSM and conditions returned by the to commands which are correctly independent versus possible status 4610 Contents of the Elementary Files (EF).. of the EFs at the MF (ICC Identification).. of files at the GSM application (Language preference).

4 (IMSI) .. (Ciphering key Kc).. (PLMN selector).. (HPLMN search period).. (ACM maximum value).. (SIM service table).. 52 Page 5 GSM Version December (Accumulated call meter).. (Group Identifier Level 1).. (Group Identifier Level 2).. (Service Provider Name).. (Price per unit and currency table).. (Cell broadcast message identifier selection).. (Broadcast control channels).. (Access control class).. (Forbidden PLMNs).. (Location information).. (Administrative data).. (Phase identification).. of files at the telecom (Abbreviated dialling numbers).. (Fixed dialling numbers).. (Short messages).. (Capability configuration parameters).. (MSISDN).. (Short message service parameters).. (SMS status).

5 (Last number dialled).. (Extension1).. (Extension2).. of GSM (figure 8).. 7211 Application an an an management session information request;.. service table phase Presence related value security related algorithms control search period related of Charge (AoC).. configuration broadcast message 83 Page 6 GSM Version December identifier level identifier level Provider 83 Annex A (normative):Plug-in 84 Annex B (informative):FDN 85 Annex C (informative):Suggested contents of the EFs at 89 Annex D (informative) 91 Page 7 GSM Version December 1995 ForewordThis Global System for Mobile communications Technical specification (GTS) has been produced by theSpecial Mobile Group (SMG) Technical Committee (TC) of the European Telecommunications StandardsInstitute (ETSI).

6 This GTS defines the interface between the Subscriber Identity Module (SIM) and the Mobile Equipment(ME) for use during the network operation phase of GSM as well as those aspects of the internalorganisation of the SIM which are related to the network operation phase, within the Digital cellulartelecommunications system (Phase 2/Phase 2+).This GTS is a TC-SMG approved GSM technical specification Version 5, which contains GSM Phase 2+enhancements/features to the Version 4 GSM technical specification . The ETS from which this Phase 2+GTS has evolved is Phase 2 GSM ETS 300 608 Edition 3 (GSM Version ).GTS are produced by TC-SMG to enable the GSM Phase 2+ specifications to become publicly available,prior to submission for the formal ETSI standards approval procedure to become EuropeanTelecommunications Standards (ETS).

7 This ensures the earliest possible access to GSM Phase 2+specifications for all Manufacturers, Network operators and implementors of the Global System for contents of this GTS are subject to continuing work within TC-SMG and may change following formalTC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in Version number as follows: Version :ythe third digit is incremented when editorial only changes have been incorporated in thespecification;xthe second digit is incremented for all other types of changes, technical enhancements,corrections, updates, is made within this GTS to GSM-TSs (note).

8 NOTE:TC-SMG has produced documents which give the technical specifications for theimplementation of the Digital cellular telecommunications system. Historically, thesedocuments have been identified as GSM Technical Specifications (GSM-TSs). TheseTSs may have subsequently become I-ETSs (Phase 1), or ETSs/ETSI TechnicalReports (ETRs) (Phase 2). TC-SMG has also produced ETSI GSM TSs which give thetechnical specifications for the implementation of Phase 2+ enhancements of the digitalcellular telecommunications system. These Version GSM Technical Specificationsmay be referred to as 8 GSM Version December 1995 Blank pagePage 9 GSM Version December 19951 ScopeThis Global System for Mobile communications Technical specification (GTS) defines the interfacebetween the Subscriber Identity Module (SIM) and the Mobile Equipment (ME) for use during the networkoperation phase of GSM as well as those aspects of the internal organisation of the SIM which are relatedto the network operation phase.

9 This is to ensure interoperability between a SIM and an ME independentlyof the respective manufacturers and operators. The concept of a split of the Mobile Station (MS) into theseelements as well as the distinction between the GSM network operation phase, which is also called GSMoperations, and the administrative management phase are described in the Technical specification [6].This GTS defines:-the requirements for the physical characteristics of the SIM, the electrical signals and thetransmission protocols;-the model which shall be used as a basis for the design of the logical structure of the SIM;-the security features;-the interface functions;-the commands;-the contents of the files required for the GSM application;-the application otherwise stated, references to GSM also apply to DCS GTS does not specify any aspects related to the administrative management phase.

10 Any internaltechnical realisation of either the SIM or the ME are only specified where these reflect over the GTS does not specify any of the security algorithms which may be GTS defines the SIM/ME interface for GSM Phase 2. While all attempts have been made to maintainphase compatibility, any issues that specifically relate to Phase 1 should be referenced from within therelevant Phase 1 referencesThis Global System for Mobile communications Technical specification (GTS) incorporates, by dated orundated reference, provisions from other publications. These normative references are cited at theappropriate places in the text and the publications are listed hereafter. For dated references, subsequentamendments to, or revisions of, any of these publications apply to this GTS only when incorporated in it byamendment or revision.