Guide to Good Lab Practice t The Basics - Warwick

1 Page 1 of 21 Guide to good Lab Practice The Basics Version November 2018 Page 2 of 21 Contents Introduction ..4 Responsibilities ..4 Principal Investigators ..4 Researchers ..4 Technical Support / Experimental Officers / Facilities Management ..4 Visitors, contractors and non- laboratory personnel ..4 General laboratory Safety ..5 Before entering the laboratory ..5 During laboratory work ..5 good laboratory Practice - Use of Fume Cupboards ..6 Before leaving the laboratory ..7 Other laboratory hazards ..7 Glassware ..7 Heating devices ..8 Vacuum systems ..8 Gases - Compressed gas cylinders ..8 Gases Cryogenic Liquids ..8 Other laboratory equipment ..9 Risk Assessment.

2 9 Control of Substances Hazardous To Health Regulations (COSHH) ..9 Why controlling potentially hazardous materials matters ..9 What are substances hazardous to health? ..9 What an Assessment Requires .. 10 Step 1: Assess the Risks .. 10 Step 2: Precautions .. 10 Step 3: Prevent or adequately control exposure .. 10 Step 4: Ensure that control measures are used and 11 Step 5: Prepare plans for accidents, incidents and emergencies .. 11 Step 6: Ensure individuals are properly informed, trained and supervised .. 11 Step 7. Exposure Monitoring .. 11 Step 8. Health Surveillance .. 12 Common misconceptions of COSHH .. 12 Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) .. 12 Page 3 of 21 Biological and GM Risk Assessment.

3 13 Hazardous substances - storage, labelling & information .. 13 General Storage Guidelines .. 14 Chemical Storage .. 14 Flammable liquid storage cabinets .. 15 Handling and Transport .. 15 Safety Data Sheets (SDS) .. 15 Labelling .. 15 First Aid & Emergency Procedures .. 15 First Aid .. 16 - Wounds .. 16 Thermal 16 Chemical Burns .. 16 Emergency Procedures .. 16 Spills .. 16 Chemical .. 17 Solvents .. 17 Other liquid spills .. 17 Dry Spills .. 17 Biological .. 17 Fire .. 17 Loss of Power or other utilities .. 18 Lone Working .. 18 APPENDIX 1 - CLP PICTOGRAMS .. 19 APPENDIX 2 SAFETY SIGNAGE .. 20 Page 4 of 21 Introduction The laboratory is a complex environment so good laboratory Practice is essential if laboratories are to be safe places in which to work.

4 This simple Guide is intended to provide you with some basic information on what good Practice requires when working in a laboratory . It is not intended to replace or be a substitute for other training and supervision to develop good understanding on the behaviours of substances and materials which should lead to being able to handle those substances and materials using good and safe techniques. Everyone has a responsibility for safety. The UK regulatory framework places the responsibility for managing risks on those who create and work with those risks. Responsibilities Everyone has responsibility to themselves and others to know and understand what they are doing to assess risks, to use suitable control measures to gain competence which supports their activities and roles.

5 The H&S Executive definition of a competent person is A competent person is someone who has sufficient training and experience or knowledge and other qualities that allow them to assist you properly . Part of gaining the required knowledge and experience is knowing your limitations and asking questions when presented with a task you do not fully understand. For instance, you have been asked to prepare some dilute acid solutions. Would you know the correct safe method to carry out this task? Below are some very basic responsibilities as they relate to working in laboratories. More comprehensive information can be found in the Leadership and management of health and safety at the University of Warwick document.

6 Principal Investigators Accountable for assessing and addressing risks associated with their research. This includes the introduction of new chemicals, equipment and people to the workspace. They need to ensure that those working for them are competent for the research work they carry out by ensuring they receive sufficient information, adequate instruction, training and supervision and by ensuring lab rules are developed and followed for the areas under their control. Researchers Researchers need to work safely and comply with relevant legislation and follow controls outlined in the relevant risk assessments, University, departmental and lab rules, this includes the purchasing or introduction of chemicals.

7 The must ensure suitable risk assessments are developed to control significant risk and must read and understand other local departmental arrangements, including materials in local information and induction booklets. Technical Support / Experimental Officers / Facilities Management Are not responsible for research activity. Their role is to ensure that the facilities and equipment are fully operational and to monitor that equipment is only used by competent staff and students. They will organise repairs when necessary. Visitors, contractors and non- laboratory personnel The university operates a permit system to grant access to visitors and contractors. The PI or their nominated person is responsible for ensuring that only authorised persons gain access to their research areas.

8 The visitor / contractor must abide by the local rules. Page 5 of 21 General laboratory Safety There are many categories of hazards that might be encountered in a laboratory setting, and situations can change frequently. Even after you have identified and controlled all current risks, it is vital that you remain open to the possibility that new unexpected dangers can arise. Ensure your assessment covers chemicals (chemicals being used and chemicals that could be created from the work you will be performing), flammable solvents, biological reagents, gases, equipment being used, others working in the space, lifting and handling etc. Review the controls measures regularly to ensure they remain adequate for risks encountered / being created.

9 Before entering the laboratory Familiarise yourself with the local rules. These will normally be in the form of a notice board at the entrance to or at designated points within the lab which indicates the basic minimum requirements. This can include details of PPE requirements, specific access requirements no pace makers etc. Ensure you follow these rules at all times. The Safety Data Sheet (SDS) for any materials you are required to handle. Pay particular attention to the sections on handling and storage; exposure controls and accidental release (spillage). There is Guidance on how to interpret Safety Data Sheets on the H&S website. The location of safety and emergency equipment such as fire extinguishers, hand wash basin, eye wash and shower, first aid and spill response kits, fire alarm activation points, telephone and emergency exits.

10 Emergency spill response procedures for the materials you will handle, emergency reporting procedures and telephone numbers. The location of designated and alternative escape routes. Any first aid measures which are specific to the chemical you are working with phenol. During laboratory work good laboratory Practice - Principles Follow Departmental and local laboratory Rules at all times. Use protective equipment as directed and remove before leaving the laboratory Wear your fastened lab coat when your risk assessment requires it (required in all labs handling chemicals & biologicals) Where directed by the Safety Data Sheet and/or directed by your risk assessment, wear appropriate gloves when handling materials and replace if damaged.