GYPROCK SHAFT SYSTEMS

Sorry, the file that you are looking for is not availabl

Fire Resistance Gyprock ™ plasterboard products have been tested to AS1530.3, ‘Simultaneous determination of Ignition, Flame Propagation, Heat Release …

Fullscreen Download

Tags:

System, Heat, Shaft, Gyprock shaft systems, Gyprock

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of GYPROCK SHAFT SYSTEMS

1 Sorry, the file that you are looking for is not availabl

Documents from same domain

GYPROCK PARTY WALL INTERTENANCY WALL …

www.gyprock.com.au

GYPROCK PARTY WALL SYSTEMS 6 Wall Clip † Aluminium Wall Clip: Used to support the 25mm H-Stud, and are critical in the fire performance of systems with a single 25mm Shaft Liner.

System, Walls, Party, Dust, Gyprock, Wall systems, Gyprock party wall intertenancy wall, Intertenancy

COVERING A MASONRY WALL WITH GYPROCK …

www.gyprock.com.au

HOW TO FIX GYPROCK® PLASTERBOARD TO A BRICK WALL OR BLOCK MASONRY WALL Covering a brick or block masonry wall with plasterboard is an ideal way to lighten a room or create a smooth surface with a cavity

With, Walls, Covering, Masonry, Gyprock, Covering a masonry wall with gyprock

GYPROCK STRATAWALL INTER-TENANCY WALL …

www.gyprock.com.au

Gyprock Standard Plasterboard – Recessed Edge Features † Recessed long edges to assist in producing smooth even and continuous surface once jointed.

GYPROCK SHAFT SYSTEMS

www.gyprock.com.au

Architectural Specification 9 System Selection Shaftwall System Table ... concrete enclosures. Weight reductions of this magnitude can result in significant ... plasterboard sheet products for fire rated and non-fire rated applications. Refer to Table 1 for thickness and sheet

Specification, Trade, Fire, Concrete, Architectural, Fire rated, Architectural specification

Boundary Wall System - gyprock

www.gyprock.com.au

fixing plasterboard/wallboard linings to timber framing, and for laminating plasterboard. Fine thread screws and clouts may also be used for fixing to timber. Application Size (Framing) Pack Qty Order No. 1x10mm/ Laminating 16mm 6g x 25mm (softwood/ hardwood) Loose 1000 169067 Collated 1000 162775 1x13/16mm 6g x 32mm (softwood/ hardwood) Loose ...

Fixings, Plasterboard, Plasterboard fixing

Installing Gyprock plasterboard

www.gyprock.com.au

sized daubs of Gyprock Stud Adhesive at maximum 300mm spacings to each of the studs, keeping the area 200mm either side of the sheet edge free of adhesive. 2. Where the end of a sheet is at a stud, do not apply adhesive as these will be fixed with nails or screws alone. 3. Place plasterboard offcuts on the floor against the frame

Gyprock

Installing Gyprock Cornice

www.gyprock.com.au

1. If you’re using a dry Gyprock Cornice Cement, mix with water as per the instructions on the pack to give a smooth creamy consistency. The cornice cement working life is around 60 minutes, so only mix what you can use in that time. 2. Working on one piece at a time and starting with the shorter lengths, apply a 10mm thick bead of Gyprock ...

Gyprock