Transcription of Hardness of Rubber: Durometer
1 APPROXIMATE Durometer Hardness COMPARISONSThe values listed are approximate and are not to be used as an exact equivalent. This information is provided as aselection guide are a few examples of Hardness based on Durometerscale: rubber Band30 Shore A Inner Tube55 Shore A rubber Tire65 Shore A rubber Shoe Heel70 Shore A Typewriter Platen95 Shore THE MEASURE OF THE Hardness OF rubber COMPOUNDSThe Durometer is the International Standard Instrument used to measure the Hardness of rubber or rubber -like measure Hardness by the penetration of an indentor into the rubber sample.
2 The calibrated reading isexpressed in a number value. The Hardness values arealways expressed in terms of plus or minus (+/-) five points(example: 60+/-5 Durometer ).It is important to note that when testing Hardness of arubber sample, the material should not be less than 1/4 thick (.250 ). Durometer TYPEAPLLICABLE TO THESE(SHORE)TYPES OF MATERIALSType A (Shore)Soft rubber & plasticsType D (Shore)Hard rubber & plasticsType 00 (Shore)Sponge & foamDisclaimer: The information contained in this document is to be used as a guide only. RubberMill cannot guarantee the accuracy, or beheld responsible for the information s end TYPESHORESHORESHOREAD0010058954690398533 8029987525977022956519946016935514915012 9045108840886357833068025762070156210555 45 Hardness of rubber : DurometerTalk to a not a machine!
3 336-622-1680.