HIGH DENSITY PE SHEET - Fabco Plastics

1 DENSITY PE SHEETHigh DENSITY PE SheetSimona Versadur 600 series high DENSITY polyethylene has excellent chemical corrosion resistance and is abrasion resistance, impact resistance, and easy for fabrication. It can be used (depending on chemistry) up to 180 F and is available in 4 x 8 sheets in thickness up to 4 . This SHEET is also available in black upon : Food processing Tanks and vessels Machined and fabricated parts Laboratory equipment Chemical processing Corrosion-resistant wall coverings Wear, skid and deflector plates Ducts, hoods, chute liners and other protective equipment PART NO.

2 THICKNESS (IN.)WT. (LBS/ SHEET ) HDPE NATURAL - 4 X 8 S340231 1/8 S340331 3/16 S340431 1/4 S340531 3/8 S340631 1/2 S340731 3/4 S340831 1 S340931 1 1/4 202 S341031 1 1/2 S341131 1 3/4 S341231 2 S341331 2 1/4 S341431 2 1/2 S341531 2 3/4 S341631 3 S341731 3 1/4 S341831 3 1/2 S341931 4 TECHNICAL DATAASTM* TEST METHODUNITTYPICAL VALUEPHYSICALD ensityD-792 AbsorptionD-570% (24 hrs @ 73 F)MECHANICALT ensile StrengthD-638 PSI4,500 Tensile ModulusD-638 PSI233,000 ElongationD-638%450 Izod ImpactD-256ft.

3 HardnessD-785 R scale65 THERMALHeat Distortion Temperature at 66 psiD-648 F175 Heat Distortion Temperature at 264 psiD-648 F118 Vicat Softening TemperatureD-1525 F260 Coefficient of Thermal C7 x 10-5 Temperature Range F-58 to +176 ELECTRICALV olume ResistivityD-257ohm cm> 6 x1016 FLAMMABILITYF lammabilitynormal flammabilityFeatures: Excellent chemical and corrosion resistance Excellent impact and abrasion resistance Easily to fabricate, weld, machine or thermoforming high - DENSITY , slippery surface, UV-resistant (Black only) Stress relieved Accurate to dimensional tolerances Color consistentNotes: Meets ASTM D 1248-84 Type III, Class A (Natural), Class C (Black).

4 Meets L-P 512C-LP-390, Class H, Type I, Grades 1 and 3. Meets FDA Regulation Title 21 CFR (Natural only). Meets Federal Specification LP-390B Type III, Class H, Grade I. Maximum application temperature +180 F. Also available in 48 x 120 and 60 x 120 . NSF Certified Cutting Board material also available in Size 48 x 96 , 48 x 120 , and 60 x 120 . Custom lengths, sizes, and special requirements available upon request. Also Available in metric , Edmonton, Saskatoon, Vancouver, Montreal9675348 LOW DENSITY PE SHEETLow DENSITY PE SheetLow DENSITY polyethylene (LDPE) is more flexible than HDPE, which makes it a good choice for prosthetic devices, most of which are either drape formed or vacuum formed.

5 Its impact resistance makes it a natural for impact pads, while its easy machinability makes it a good choice for fabricated parts where chemical and corrosion resistance is demanded. LDPE is stress relieved and a natural color. It is available in 4 x 8 sheets in thicknesses up to 1 . Applications: Industrial Medical Thermoforming Die Pads Hinges Impact pads Orthotic and Prosthetic devices Thermoformed parts PART NO. THICKNESS (IN.)WT. (LBS/ SHEET ) LDPE NATURAL - 4 X 8 S300231 1/8 S300331 3/16 S300431 1/4 S300531 3/8 S300631 1/2 S300731 3/4 S300831 1 PHYSICAL PROPERTIESMETRICENGLISHCOMMENTSS pecific lb/in ASTM D792 Water AbsorptionMax %Max % Immersion, 24hr; ASTM D570(2)Water Absorption at SaturationMax %Max % Immersion.

6 ASTM D570(2)MECHANICAL PROPERTIESH ardness, Shore D4545 ASTM D2240 Tensile Strength, MPa1400 psi ASTM D638 Elongation at Break100 %100 % ASTM D638 Tensile GPa57 ksi ASTM D638 Flexural GPa29 ksi ASTM D790 Flexural Yield MPa1500 psi ASTM D790 Compressive MPa1400 psi 10% Def., 73 F; ASTM D695 Compressive GPa54 ksi ASTM D695 Izod Impact, NotchedNBNB ASTM D256 Type AELECTRICAL PROPERTIESS urface Resistivity per SquareMin 1e+015 ohmMin 1e+015 ohm ASTM D257 THERMAL PROPERTIESM elting Point118 C244 F Crystalline, Peak; ASTM D3418 Maximum Service Temperature, C160 F Long TermFlammability, UL94 (Estimated Rating)HBHB 1/8 inchQUALITATIVE PROCESSING PROPERTIESC ompliance - FDAC ompliantMachinability31-10, 1=Easier to MachineService in AlcoholsUnacceptableService in Aliphatic HydrocarbonsUnacceptableService in Aromatic HydrocarbonsUnacceptableService in Chlorinated SolventsUnacceptableService in EthersUnacceptableService in KetonesUnacceptableService in Strong AcidsUnacceptableService in Strong AlkaliesUnacceptableService in SunlightUnacceptableService in Weak AcidsUnacceptableService in Weak AlkaliesUnacceptableNotes.

7 Meets ASTM D 1248-84 Type III, Class A (Natural), Class C (Black). Meets L-P 512C-LP-390, Class H, Type I, Grades 1 and 3. Meets FDA Regulation Title 21 CFR (Natural only). Meets Federal Specification LP-390B Type III, Class H, Grade I. Maximum application temperature +180 F. Custom lengths, sizes, and special requirements available upon request. LDPE SHEET is offered complete with no protective : Light-weight Good impact resistance Extremely flexible Easily cleaned Thermoforming performance Meets food handling guidelines No moisture absorption Chemical- and SHEETU ltra high Molecular Weight SheetUHMW SHEET is resistant to chemical attack and moisture absorption, and retains key physical properties to -30 C.

8 UHMW is an excellent general-purpose material and is a cost-effective solution for food handling problems, and meets FDA, USDA and 3-A Dairy guidelines for food processing and handling. It is also available in custom colours which also meet FDA and USDA guidelines for food processing and handling. It is available in 4 x 8 , 4 x 10 and 5 x 12 sheets in thicknesses up to 6 . Applications: Agriculture Bottling Canning Conveyor manufacturers Food processing Packaging Material handling Waste water treatmentFeatures: Meets FDA/USDA guidelines; 3-A Dairy-approved (natural) Reduces noise Self-lubricating Chemical-, corrosion- and wear-resistant No moisture absorption Non-toxic, low-friction surface PART NO.

9 THICKNESS (INCHES)WT. (LBS/ SHEET ) UHMW NATURAL - 4 X 8 S370231 1/8 20 S370331 3/16 30 S370431 1/4 40 S370531 3/8 60 S370631 1/2 80 S370731 3/4 120 S370831 1 160 S370931 1 1/4 200 S371031 1 1/2 240 S371131 1 3/4 280 S371231 2 320 S371331 2 1/4 360 S371431 2 1/2 400 S371531 2 3/4 440 S371631 3 480 S371731 3 1/4 520 S371831 3 1/2 560 S371931 4 640 Notes: Meets ASTM-D-4020-81 of to molecular weight. Maximum application temperature +180 F. Custom lengths, sizes, and special requirements available upon request. UHMW SHEET is offered with no protective foil.

10 Also available in 4 x 10 and 5 x 10.