HIGH DENSITY POLYETHYLENE PIPE HDPE - jcmindustries.com

1 JCMINDUSTRIESF ittings and FabricationsDesigned and EngineeredforHIGH DENSITY POLYETHYLENE PIPEE ffective September 2, 2010 Replaces 9/2 Price $ Industries, O. Box 1220 Nash, TX Toll Free 800-527-8482 Fax Toll Free 800-874-9524 Call Outside 903-832-2581 Fax Outside 903-838-6260 HDPEHDPEHDPE1 Data Included Within This PresentationInformation DescriptionPage NumberProduct Index .. 1 JCM Featured Products for HDPE .. 2 General Application Information .. 3 Frequently Asked Questions ..4 - 6 Universal Clamp CouplingsUniversal Clamp Couplings - Design Features.

2 7 - 8 Universal Clamp Couplings - Material Specifications .. 9 Models 101 - 102 .. 10 Models 171 - 172 .. 11 Models 131 - 132 .. 12 Models 161 - 162 .. 13 Bolted Flexible Couplings, Flanged Adapters and Accessories for Connecting PipeBolted Flexible Couplings - Design Features .. 14 Bolted Flexible Couplings - Material Specifications .. 15 Joining HDPE Pipe .. 16 Models 230 - 231 .. 17 Model 201.. 18 Models 210 - 211 - 212 .. 19 Models 241 - 242 .. 20 Model 301.. 21 Model 303.. 22 Service SaddlesService Saddles - Design Features.

3 23 - 25 Models 404 - 406 .. 26 Models 418 - 438 .. 27 Tapping SleevesTapping Sleeves - Design Features .. 28 JCM Tapping Sleeves .. 29 HDPE Tapping Sleeve Ranges and Part Numbers ..30 - 32 Model 412.. 33 Model 422.. 34 Models 418 - 438 .. 35 Model 419.. 36 Model 429.. 37 Models 452 - 464 .. 38 Models 459 - 465 .. 39 Restrainers and Other JCM Products for HDPESur-Grip Restrainers Design Features .. 40 Models 610 - 621.. 41 Torque Wrenches and Tools .. 422 JCM FEATURED PRODUCTS FOR POLYETHYLENE PIPEJCM Industries manufactures a number of products which have proven to be very applicable to HDPE characteristics of POLYETHYLENE pipe require special attention to the repair, connection and tappingprocedures performed in systems using this type of Industries products especially applicable to HDPE pipe include.

4 REPAIR CLAMPS AND COUPLINGS101 - 102 Universal Clamp Couplings171 - 172 Universal Clamp Coupling with Removeable Lug131 - 132 All Stainless Steel Universal Clamp Couplings161 - 162 Fabricated Lug Stainless Steel Repair Clamp136 Heavy Duty All Stainless Steel Repair Clamp201 Steel Couplings210 Ductile Iron Couplings241 - 242 Optimum Range Couplings301 - 303 Flanged Coupling AdaptersSERVICE SADDLES AND TAPPING SLEEVES412 - 422 Tapping Sleeves (6 size and larger, contact JCM for smaller sizes)419 - 429 Tapping Sleeves with Mechanical Joint Outlet*452 - 464 Stainless Steel Tapping Sleeve with Outlet Seal Gasket459 - 465 Stainless Steel Tapping Sleeve with Mechanical Joint Outlet*418 Fabricated Threaded Outlet Tapping Sleeve (1/2 - 4 Outlets)438 Stainless Steel Threaded Outlet Tapping Sleeve404 - 406 Service Saddle with Double Stainless Steel Straps(3/4 thru 2-1/2 outlets, 2 - 24 sizes)

5 OTHER PRODUCTS610 - 621 Sur-Grip Restrainers230 HDPE Pipe StiffenersSuccess in these products is largely due to the design criteria that took the working characteristics of HDPEPipe into consideration. Design characteristics inherent to JCM clamps, couplings, tapping sleeves, saddlesand other products are as follows:GASKETS - Tapping sleeve and service saddle gaskets should have wide cross section with enough volumeto store compression energy. Gaskets should be of a hardness which will flex with pipe pressure seals should have a mechanical sealing lip that utilizes line pressure to increase seal.

6 Outlet gasketsshould be externally and internally SLEEVE OR CLAMP BODY - Tapping sleeve or clamp coupling body should conform to the HDPE pipe and support it and the branch (in cases of outlets). Width of sleeve should be such that it spreads the loadto prevent point loading or deformation of the - Bolts and bolting should be replaceable, self-aligning and heavy enough to properly load thegasket and assure an adequate safety factor.*Licensed by PowerSeal Corporation Patent No. 6,227, INDUSTRIES, INC,General Application InformationFittings and Fabrications for high DENSITY POLYETHYLENE PipeJCM Products for repairing, connecting and tapping POLYETHYLENE pipe have been tested and evaluated for theirsuitability and design capability.

7 In each case JCM products have performed satisfactorily in respect to their designapplication. Test criteria range from short-term for special applications to long-term 1000 hour evaluations with themost common applications. Temperature and pressure cycles are also incorporated to fully address the pipecharacteristics and full range of occurrences. Special monitoring equipment is utilized to produce accurate test dataand for historical DENSITY POLYETHYLENE Pipe (HDPE) has several unique characteristics which are taken into consideration in thefollowing guidelines.

8 The disregard of these guidelines and/or the installation instructions supplied with each fittingmay cause unsatisfactory results and void the expressed product Pipe considered for use must be manufactured to the recommendations set forth in the ANSI/AWWAS tandard C906 and complies with criteria in reference to has a high coefficient of thermal expansion and contraction along with a low modulus of elasticity. Thissensitivity to pressure and temperature causes HDPE to expand and contract more than traditional water and sewerpiping materials.

9 The potential pipe expansion or contraction must be considered when assembling bolt on will relax ( creep ) at lower stress levels than other piping materials. Due to these special characteristics, thefollowing parameters should be adhered to when utilizing JCM products for HDPE (ANSI/AWWA C901, C906). HDPE and bolt-on fitting connections are vulnerable to forces experienced with expansion/contraction of thepipe and require special consideration. Restraint must be considered when joining plain end pipe to ensureagainst pipe pull out.

10 HDPE is manufactured with a smooth pipe wall surface resulting in a low coefficient offriction that can enable fittings to slide, shift, move, rotate and/or travel on the pipe after installation. JCMproducts are limited in the tolerance of axial movement of the pipe. JCM products for HDPE are designed for underground pressurized fluid service and are pressure rated to matchthe pipe SDR pressure rating or with a maximum service rating of 150 PSI (Temperature 35o - 75o F/Maximumtest pressure limited to rated pipe pressure or fitting, whichever is lower).