HOG BUNG DROPPER - Kentmaster

1 Rev B: 08/10 OPERATOR S MANUAL [ENGLISH]:HOG bung DROPPERINCLUDING: OPERATION, INSTRUCTION, INSTALLATION AND MAINTENANCEIMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS GUN_High Torque MotorPowerful Cutting ActionEasy to Clean and SanitizeKENTMASTER MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 Page 1 of 19 Rev B: 08/10 INDEXINDEX .. 2 TOOL DATA.

2 3 PLACING INTO SERVICE .. 4 INSTALLATION INSTRUCTIONS .. 6 OPERATING INSTRUCTIONS .. 6 MAINTENANCE .. 6 BLADE REMOVAL AND CLEANING.

3 6 SERVICE .. 6 SPARE PARTS LIST .. 7 bung GUN - Figure 1 .. 8 bung GUN HOSES SCHEMATIC Figure 2 .. 9 CONTROL VALVE w/HOSES Figure 3.

4 10 CONTROL VALVE ASSEMBLY Figure 4 .. 11 bung GUN TOOL ASSEMBLY Figure 5 .. 12 ADAPTER ASSEMBLY Figure 6 .. 13 HANGER ASSEMBLY Figure 7 .. 13 STRAIGHT HANDLE ASSEMBLY w/ BRACKET Figure 8.

5 14 STRAIGHT HANDLE ASSEMBLY BRAKEDOWN Figure 9 .. 14 PISTOL HANDLE ASSEMBLY Figure 10 .. 15 GEAR CASE ASSEMBLY Figure 11 .. 16 GEAR CAGE ASSEMBLY Figure 12 .. 16 AIR MOTOR ASSEMBLY Figure 13.

6 17 NOTICE TO EMPLOYER AND PURCHASER OF TOOL .. 18 Kentmaster Worldwide Location .. 19 Kentmaster MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 Page 2 of 19 Rev B: 08/10 TOOL DATAMODEL: bung GUNASSEMBLY NO.: 6800000 TYPE: AIR OPERATEDNET WEIGHT: 14 lbs ( kg)TOOL REQUIREMENTS: Tool requires 40 ft3/min of air @ 90 PSI air pressureACCESSORIESACCESSORIESPART bung DROPPER w/o BLADE6800100 BLADE ID4120010 BLADE 2 1/4 ID4120020 BLADE 2 1/2 ID4120030 CONTROL VALVE ASSEMBLY1800500 SPRING BALANCERS, 13-18 Lbs, ft TRAVEL7100220 STERILIZER6822300 VACUUM SYSTEM6822000 BLADE GRINDER6820000 AIR FILTER/REGULATOR/LUBRICATOR7200140 Kentmaster MFG.

7 CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 Page 3 of 19 Rev B: 08/10 GENERAL INFORMATION_____COVERING: SAFETY PRECAUTIONS AND PLACING INTO SERVICE bung GUN_____READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS TOOL_____IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THIS INFORMATION INTO THE HANDS OF THE INTO SERVICE_____ = Hazards or unsafe practices which could result in severe personal injury, death, or substantial property damage. = Hazards or unsafe practices which could result in minor personal injury, product, or property damage.

8 = Important installation, operation or maintenance information. Installation, adjustment repair and maintenance of this tool must be made by trained and qualified personnel. Always disconnect power supply from tool before: (A) Installing or removing blades from tool. (B) Making repairs or adjustments to the tool. (C) Performing maintenance or cleanup not operate this tool until you have received training in the handling, operation and use of this using a malfunctioning or defective tool immediately, report any problems or defects to your supervisor for removal of the tool from place your hand or any part of your body in the cutting path of the not activate control switches or triggers of this tool unless you intend to test or operate this tool.

9 Never make alterations or modifications to this tool. Remove and disconnect power from the tool when tool is left unattended or not in MFG. CO., INC. 1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA TELEPHONE: (626) 359-8888 FAX: (626) 303-5151 Page 4 of 19 ! WARNING ! CAUTION ! NOTICE ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNINGRev B: 08/10 INSTALLATION INSTRUCTIONSTHE COMPRESSED AIR DISTRIBUTION SYSTEM MUST BE LARGE ENOUGH TO supply AN ADEQUATE VOLUME OF CLEAN AND DRY COMPRESSED AIR TO THE ALL NECESSARY LINE CONNECTIONS TO THE AIR FILTER-REGULATOR-LUBRICATOR (PART NO. 7200140) MUST BE INSTALLED IN AIR supply FOR EACH FILL LUBRICATOR WITH Kentmaster AIR MIST OIL (PART NO.)

10 790305). SET DRIP RATE ACCORDING TO INSTRUCTIONS SUPPLIED. TURN ADJUSTMENT ON SIGHT FEED DOME TO INCREASE/DECREASE OIL DELIVERY. MONITOR THE DEVICE BEING LUBRICATED AND READJUST IF TOOL REQUIRES GREASING AFTER EVERY 3 TO 4 HOURS OF OPERATION. GREASE TWO (2) LOCATIONS USING Kentmaster GREASE GUN (PART NO. 4501470) AND GREASE (PART NO. 7903070).5. TOOL REQUIRES 40 OF AIR @ 90 AIR PRESSURE. OPERATING INSTRUCTIONS ONLY TRAINED PERSONNEL ARE TO OPERATE THIS TOOL. 1. HOLD TOOL FIRMLY IN HAND WITH TRIGGER LEVER IN POSITION TO BE ACTIVATED BY SQUEEZE TRIGGER TO ACTIVATED TOOL, RELEASE TRIGGER TO DEACTIVATE POSITION TOOL AND PERFORM CUTTING DO NOT LAY TOOL DOWN WHEN TOOL IS NOT BEING USED.