Houghton International Inc. Revision Date : 09/13/2011 ...

1 Houghton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B1. Chemical Product and Company IdentificationProduct NameHOCUT 795-BCompany NameHoughton International & Van Buren AvesValley Forge, PA 19482 Company NameHoughton Canada Walker Drive, Unit BBrampton, ON L6T 5P5 Phone: (610) 666-4000 Emergency24 HOUR - (800) 424-9300 or Phone Number(703) 527-3887 (CHEMTREC)Emergency24 HOUR - 613-996-6666 Phone Number -(CANUTEC)CanadaCHEMTRECHOUHC ompany CodeCHEMTREC10769 CustomerNumberFAX(610) 666-1376 Customer(888) 459-9844 ServiceProduct UseMetalworking Fluid2. Hazardous Ingredients % byComponentCas NoWeightHazardsGlycerine56-81-51-10 TLV: 10 mg/m (mist)PEL: 15 mg/m (total dust)Mineral Oil64742-52-530-60 TLV: 5 mg/m as oil mistPEL: 5 mg/m as oil mistSTEL: 10 mg/m as oil mistOther:Monoisopropanolamine78-96-61-5 TLV: N/EPEL: N/ESTEL: N/EOther: 5 ppm (Mfr)N/E - Not Established; N/A - Not Applicable; Mfr - Manufacturer RecommendationTLV, STEL - ACGIH; PEL - OSHAPage 142795500 Continued on Next PageHoughton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B3.

2 Hazards IdentificationPrimary Entry RoutesEYES, SKIN, INHALATIONA cute Effects InhalationAVOID BREATHING PRODUCT MISTS. INHALATION OF MISTS MAY CAUSEIRRITATION OF THE UPPER RESPIRATORY TRACT. EyeMAY CAUSE MILD EYE IRRITATION. SkinMAY CAUSE MILD IRRITATION TO SKIN ON PROLONGED CONTACT. IngestionINGESTION MAY CAUSE IRRITATION TO MOUTH, THROAT AND PRODUCT DOES NOT CONTAIN ANY COMPONENT REPORTABLE AS ACARCINOGEN UNDER 29 CFR ConditionsPRE-EXISTING SKIN AND RESPIRATORY CONDITIONS MAY BE AGGRAVATEDA ggravated by LongTermBY EXPOSURE. ExposureChronic EffectsUNKNOWNHMIS: Health1 Flammability0 Physical Hazard0* indicates that there may be chronic health effects present4.

3 First Aid MeasuresInhalationIF INHALED, REMOVE TO A SOURCE OF FRESH ContactFLUSH EYES WITH WATER FOR 15 MINUTES. CONSULT ContactWASH SKIN WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHINGAND LAUNDER BEFORE REUSING. CONSULT PHYSICIAN IF INGESTED, DO NOT INDUCE VOMITING! CONSULT to PhysiciansNO SPECIFIC ANTIDOTE KNOWN. BASED ON INDIVIDUAL REACTIONS OFTHE PATIENT, THE PHYSICIAN'S JUDGMENT SHOULD BE USED TO CONTROLSYMPTOMS AND CLINICAL - Not ApplicablePage 242795500 Continued on Next PageHoughton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B5. Fire Fighting MeasuresFlash PointN/AMethod UsedCLEVELAND OPEN CUP Autoignition TemperatureN/DLELN/DUELN/DExtinguishing MediaPRODUCT CONTAINS WATER.

4 IF WATER IS REMOVED, USE CARBONDIOXIDE, DRY CHEMICAL OR Fire or ExplosionNO UNUSUAL FIRE OR EXPLOSION Fighting InstructionsWEAR SELF-CONTAINED BREATHING APPARATUS IN CONFINED : Health1 Flammability0 Reactivity0 SpecialN/AN/A - Not Applicable; ND - Not Determined; > - Greater Than; < - Less Than6. Accidental Release MeasuresSpill or Release ProceduresAPPLY DRY ABSORBENT MATERIAL AND SWEEP UP THOROUGHLY. 7. Handling and StorageStorage and HandlingAVOID STORAGE NEAR STRONG OXIDIZERS. WASH THOROUGHLY AFTERR equirementsHANDLING. DO NOT ADD NITRITES TO THIS PRODUCT. USE WITHADEQUATE VENTILATION.

5 KEEP CONTAINERS CLOSED WHEN NOT IN 342795500 Continued on Next PageHoughton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B8. Exposure Controls/Personal ProtectionEngineering ControlsGENERAL MECHANICAL VENTILATION IS ADEQUATE. LOCAL EXHAUSTPREFERRED IN MISTING Protective Equipment Eye/Face ProtectionWEAR SAFETY GOGGLES OR SAFETY GLASSES WITH SIDE SHIELDS. Skin ProtectionUSE RUBBER GLOVES AND PROTECTIVE CLOTHING TO MINIMIZE SKINCONTACT. Respiratory ProtectionRESPIRATORY PROTECTION REQUIRED IF APPLICABLE EXPOSURE LIMITSARE EXCEEDED. OtherEYEWASH AND SAFETY SHOWER : Never eat, drink, or smoke in work areas.

6 Practice good personal hygiene after using this material, especially before eating, drinking,smoking, or applying Physical and Chemical PropertiesAppearanceAMBER LIQUIDOdorMILD OIL-AMINE ODORV apor Pressure< 1 (mmHg)Vapor Density > 1(Air = 1)Specific (Water = 1)pH (Neat) (Dilution) At Percent5 SolubilityEMULSIFIESB oiling Point> 200 F/ 93 CFreezing/ MeltingN/DPointVOC113 g/LVOC MethodASTM E1868-10 UsedEvaporation Rate< 1 (BuAc = 1)N/D - Not Determined; N/A - Not Applicable; > - Greater Than; < - Less ThanPage 442795500 Continued on Next PageHoughton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B10.

7 Stability and ReactivityStabilityTHIS PRODUCT IS STABLE AT ROOM TEMPERATURE IN CLOSEDCONTAINERS UNDER NORMAL STORAGE AND HANDLING IncompatibilitiesAVOID CONTACT WITH STRONG DecompositionTHERMAL: OXIDES OF CARBON AND NITROGENP roductsHazardous PolymerizationHAZARDOUS POLYMERIZATION WILL NOT Toxicological InformationNO DATA AVAILABLE12. Ecological InformationNO DATA AVAILABLE13. Disposal ConsiderationsDisposalFOLLOW PERTINENT REGULATIONS FOR DISPOSAL. IT IS THERESPONSIBILITY OF THE PRODUCT USER TO DETERMINE, AT THE TIME OFDISPOSAL, WHETHER A MATERIAL CONTAINING THE PRODUCT OR DERIVEDFROM THE PRODUCT SHOULD BE CLASSIFIED AS A HAZARDOUS WASTE.

8 (40 CFR )RCRA Hazardous Waste N/ANumber14. Transportation InformationProper Shipping NameNOT HAZARDOUS UNDER DOT, AIR OR IMO REGULATIONS. TDGNOT REGULATED UNDER THE CANADIAN TRANSPORTATION OFDANGEROUS GOODS 542795500 Continued on Next PageHoughton International date : 09/13/2011 Material Safety Data SheetHOCUT 795-B15. Regulatory InformationTSCA Section 8(b)ALL OF THE COMPONENTS IN THIS PRODUCT ARE ON THE OF THE COMPONENTS IN THIS PRODUCT ARE ON THE CANADIAN DSL. THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARDCRITERIA OF THE CPR AND THE MSDS CONTAINS ALL OF THE INFORMATIONREQUIRED BY THE Reportable NONEQ uantitySARA Title III, Section 313 THIS PRODUCT CONTAINS NO TOXIC CHEMICAL SUBJECT TO THEREPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THESUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART RULE 1144: THIS PRODUCT CONTAINS VOCS AS DETERMINED BYTEST METHOD ASTM E1868-10 AND CAN ONLY BE USED AS A METALWORKING FLUID OR AS A DIRECT CONTACT LUBRICANT AT A MAXIMUMCONCENTRATION OF 20% IN CALIFORNIA S SCAQMD REGION AS PER RULE1144.

9 VOC CONTENT FOR THIS PRODUCT IS 113 Depleting THIS PRODUCT WAS NOT MANUFACTURED, DOES NOT CONTAIN, AND WASS ubstancesNOT PACKAGED USING ANY CLASS I OR CLASS II OZONE DEPLETINGSUBSTANCE AS DEFINED BY THE CLEAN AIR Other InformationDate of Preparation:13 September 2011 Prepared ByGARY CARLT itleMANAGER, PRODUCT SAFETYT elephone Number(610) 666-4000 Disclaimer: The information presented herein has been compiled from sources considered to be dependable and is accurate as of the date , since data, safety standards, and government regulations are subject to change and the conditions of handling and use are beyond ourcontrol, Houghton International makes no warranty regarding the accuracy of such data or its suitability for any purchaser's use or for any consequenceof its use.

10 The data in this MSDS relates only to the specific material designated herein and does not relate to use in combination with any other materialor in any process. Safe handling and use remains the responsibility of the purchaser and the purchaser has the sole responsibility to determine thesuitability of the materials for any use and the manner of use contemplated. Houghton International assumes no responsibility for injury to the recipient orto third persons or for any damage to any property and the recipient assumes all such 642795500 End of Document