HVAC Budget Pricing - CT Mechanical

1 October 2010 Note: Prices are based on typical installations. Do not use these values without consulting the HVAC Contractor. These values are estimatesonly. Without complete knowledge of the system, these values can be grossly Budget PricingPrice per square foot (does NOT include base building duct loops)Relocation of Existing EquipmentConstant Volume (relocate existing diffusers and ductwork)$ System (relocate pneumaticVAV, relocate diffusers, some new diffusers) $ System (relocate DDCVAV, relocate diffusers, some new diffusers) $ System (relocate pneumaticFPB, relocate diffusers, some new diffusers) $ System (relocate DDCFPB, relocate diffusers, some new diffusers)$ , cap and disconnect (removal by others)

2 $ new boxes, distribution, and diffusers (base building loop exists)Constant Volume (new low-pressure duct, new diffusers) $ System (new pneumaticVAV, associated ductwork, new diffusers) $ System (new DDCVAV, associated ductwork, new diffusers)$ System (new pneumaticFPB, associated ductwork, new diffusers) $ System (new DDCFPB, associated ductwork, new diffusers)$ per unitRelocation of Supply Diffuser$290 Supply Diffuser $340 Return Grille $130 Duct $425 Damper $300 Pneumatic VAV (Box, Duct, Grilles) $3,500 DDC VAV (Box, Duct, Grilles) $5,000 Pneumatic FPB (Box, Duct, Grilles) $5,800 DDC FPB (Box, Duct, Grilles) $7,800 Pneumatic VAV (Some Duct and redo T-stat) $1,300 DDC VAV $2,300 Pneumatic FPB $1,700 DDC FPB $2,700 Pneumatic T-stat $250 DDC T-stat $1,250 Exhaust Fan (Fan, Duct, Grilles) $3,250 & Permit Drawings $ per ft.

3 RTU (RTU, Duct, Grilles) $2,800 per tonAHU (AHU, Duct, VAV, Grilles) $5,200 per tonMedium-Pressure Duct (24 x 10) $82 per linear Duct (48 x 14) $124 per linear Electric Baseboard Heat (Supply only) $25-$75 per linear Cabinet Heater (Supply only) $450 Cooling $2,000-$10,000 per tonInsulation (Soft Foil Duct only) $2 per ft. Test & Balance $ per ft. Sealing of Ductwork $ per linear Blank-offs $ per linear Requirement (add to above) $ $ per ft.