Hydrolic Spiking Gun - Verotest

1 Hydrolic Spiking Gun Directors: Ernst Merry (Managing Director), Veronica Merry (Director of Admin & HR) Office: +27(0)11 805 8322, +27(0)11 805 7800, Fax:+27(0)86 618 1511, +27(0)11 805 6879 Website: , E-Mail: Co-Ordinates: S 25 58 23,7 E 28 08 20,8 The cable Spiking tool is designed and developed by CCE. The Spiking tool is totally hydraulic in opera-tion and does not require cartridges or a license to operate. Our product has been developed for use un-der all conditions and through extensive testing meets all required safety precautions. The Spiking tool is simple to operate and will easily penetrate every form of normally applied cable cover-ings up to 120mm outside diameter. The design is such that it will provide years of trouble free usage and can be applied vertically or horizontally.

2 Being totally manufactured in South Africa, all parts are easily and inexpensively available. In the event of accidentally Spiking into a live cable the chisel will be burned. Minimum repairs would be needed such as resharpening the chisel or replacing it immediately at low cost. A number of municipalities are now insisting on the use of a Spiking tool to finally determine if a cable is dead before cutting. The intelligent use of this unit can be a lifesaver and under all conditions will give definite manpower accident prevention. The Spiking tool and all its components comes packed in a powder coated case weighing 28 Kg with di-mensions of 600 mm (L) x 400 mm (W) x 200 mm (H).