ICAO Annex 14 Standards and Aerodrome Certification

1 ICAO Annex 14 Standards and Aerodrome Certification Punya Raj Shakya Regional Officer Aerodromes and Ground Aids, ICAO Asia/Pacific Regional Office (Bangkok). ICAO Workshop for Pacific Island States, 12-15 December 2016. 04/12/2016 1. Objectives: Review the basic provisions found in ICAO Annex 14. Volume I, Aerodrome Design and Operations. Discuss ICAO Annex 14 guidance related to Aerodrome Certification (Doc. 9774). Identify the ICAO documents published in support of the provision found in ICAO Annex 14 Volume I. Discuss other guidance associated with the Aerodrome Certification . 04/12/2016 2. Contents of Annex 14, Volume I Aerodrome Design and Operations Chapter 1 General (Definitions, Applicability, Certification of Aerodromes, Safety Management System & Reference codes). Chapter 2 Aerodrome data Chapter 3 Physical characteristics Chapter 4 Obstacle restriction and removal Chapter 5 Visual Aids for navigation Chapter 6 Visual Aids for denoting obstacles Chapter 7 Visual Aids for denoting restricted use areas Chapter 8 Electrical Systems Chapter 9 Aerodrome operational services, equipment and installations Chapter 10 Aerodrome maintenance 04/12/2016 3.

2 In general terms, ICAO Annex 14, Volume I covers technical specifications and requirements associated with: Aerodrome Certification Design of Aerodrome facilities Aerodrome operational services Aerodrome operational safety These general areas of ICAO Annex 14, Volume I, listed above, are supplemented by information found in: Appendices (are also SARPs). Attachments (guidance to the application of SARPs). 04/12/2016 4. PUBLICATIONS (related to the specifications of ICAO Annex 14). Airport Planning Manual (Doc 9184). Part I - Master Planning Part 2 - Land Use and Environmental Control Part 3 - Guidelines for Consultant/Construction Services 04/12/2016 5. PUBLICATIONS (related to the specifications of ICAO Annex 14). Aerodrome Design Manual (Doc 9157). Part I - Runways Part 2 - Taxiways, Aprons and Holding Bays Part 3 - Pavements Part 4 - Visual Aids Part 5 - Electrical Systems Part 6 - Frangibility 04/12/2016 6.

3 PUBLICATIONS (related to the specifications of Annex 14). Airport Services Manual (Doc 9137). Part 1 - Rescue and Fire Fighting Part 2 - Pavement Surface Conditions Part 3 - Wildlife Control and Reduction Part 4 Fog Dispersal [Withdrawn]. Part 5 - Removal of Disabled aircraft Part 6 - Control of Obstacles Part 7 - Airport Emergency Planning Part 8 - Airport Operational Services Part 9 - Airport Maintenance Practices 04/12/2016 7. PUBLICATIONS (related to the specifications of Annex 14). Stolport Manual (Doc 9150). Heliport Manual (Doc 9261). Manual on the ICAO Bird Strike Information System (IBIS) (Doc 9332). Manual of Surface Movement Guidance and Control Systems (SMGCS) (Doc 9476). Human Factors Training Manual (Doc 9683). Manual on Certification of Aerodromes (Doc 9774). Safety Management Manual (SMM) (Doc 9859). Procedures for Air Navigation Services - Aerodromes (Doc 9981). 04/12/2016 8.

4 ICAO Documents Related to Aerodrome Certification ICAO Annex 14 Volume I Aerodrome Design and Operations Manual on Certification of Aerodromes (Doc 9774). Safety Management Manual (SMM) (Doc 9859). Procedures for Air Navigation Services - Aerodromes (Doc 9981). 04/12/2016 9. Article 15 of the ICAO Convention: Requires that all aerodromes open to public use, under the jurisdiction of the country, provide uniform conditions for aircraft of all other contracting States. How do you do that? Through the Certification of aerodromes. 04/12/2016 10. Why to certify aerodromes? 1. ICAO member States have agreed to a standard about certifying aerodromes. 2. Certification enables member State to discharge safety responsibilities in Aerodrome regulations and provides evidence of action taken. 3. Certification will be reviewed in the ICAO. Safety Oversight Audit programme. 04/12/2016 11. Why to Certify Aerodromes?

5 ICAO member States have agreed to a standard about certifying aerodromes ICAO Annex 14 Volume I has Standards that require: States shall certify aerodromes used for international operations in accordance with the specifications contained in this Annex as well as other relevant ICAO specifications through an appropriate regulatory framework . Additionally, ICAO Annex 14 requires that: A certified Aerodrome shall implement a safety management system acceptable to the State/CAA. 04/12/2016 12. Why to Certify Aerodromes? Certification enables member State to discharge safety responsibilities in Aerodrome regulations and provides evidence of action taken. Without the process of Certification , a strong commitment to quality assurance of safety is difficult to demonstrate: - What evidence is there of compliance with Standards ? - How can procedures be assessed as safe? - What staff competencies are required, and is appropriate training provided?

6 - How can the accuracy of published aeronautical data be assured? 04/12/2016 13. Why to Certify Aerodromes? The ICAO Safety Oversight Audit Programme is a comprehensive systems approach for the conduct of safety oversight audits and includes a comprehensive system's approach review of States conformity with core elements of the safety provisions contained in: Annex 1 Personnel Licensing, Annex 6 Operation of aircraft , Annex 8 Airworthiness of aircraft , Annex 11 Air Traffic Services, Annex 13 aircraft accident and incident investigation , and Annex 14 Aerodromes. 14. 04/12/2016. Aerodrome Certificate How can Aerodrome This certificate authorizes Certification be achieved? Airport Authority to operate International Airport 1. Establish an appropriate This certificate is issued under the provisions of Civil Aviation Regulation The operation and use of the Aerodrome is regulatory framework subject to the Civil Aviation Act, the Civil Aviation Regulations, and any relevant directions issued by the Civil Aviation Authority, including any conditions endorsed on the reverse of this document.

7 This certificate remains in force until surrendered, suspended or cancelled. Certificate Number: 001. 2. Require an Aerodrome Signed by Inspector Manual for Certification 10 September 2003. 04/12/2016 15. Article 37 of the Convention on International Civil Aviation Adoption of international Standards and procedures Each contracting State undertakes to collaborate in securing the highest practicable degree of uniformity in regulations, Standards , procedures, and organization in relation to aircraft , personnel, airways and auxiliary services in all matters in which such uniformity will facilitate and improve air navigation. 04/12/2016 16. Article 38 of the Convention on International Civil Aviation Any State which finds it impractical to comply in all respects with any such international standard or procedure shall give immediate notification to ICAO of the differences between its own practice and that established by the international standard.

8 04/12/2016 17. ICAO Annex 14 Aerodromes contains Standards and recommended practices. States must notify differences with Standards ; and are invited to notify differences with recommended practices. 04/12/2016 18. Annex 15 AIS contains a requirement for Aerodrome information: States must notify in AIP: differences with Standards , and significant differences with recommended practices. 04/12/2016 19. Summary Aerodrome Certification : Is an ICAO Annex 14 standard. Is in ICAO USOAP. Enables a safety assurance approach. Can be achieved using: - an appropriate regulatory framework;. - an acceptable specific Aerodrome Manual; and - fulfilling by the Aerodrome operator all criteria established by the CAA for the Certification . 04/12/2016 20. Aviation is safe because it has the culture to learn and react