Transcription of INDUCTION MOTOR - TECO 東元電機
1 INDUCTION MOTORT otally-Enclosed Fan-Cooled NEMA Standard EPACT Three Phase INDUCTION Motors DESIGN VERSATILITYTECO TOTALLY ENCLOSED FAN COOLED squirrel-cage INDUCTION motors aredesigned, manufactured and tested to meet or exceed the latest NEMA, IEEE, CSA andother international standards. These motors are suitable for all general applicationswhere an open machine is not applicable due to severe environments such as excessivedirt, dust and/or moisture. The unique design, first-grade material and excellentworkmanship make TECO Motors last much longer and give cost-efficient operation. Name plate BASIC SPECIFICATIONSRATINGAPPLICATIONAMBIENTCO NDITIONCONSTRUCTIONPERFORMANCESTANDARD SPECIFCATIONSQUIRREL-CAGE INDUCTION MOTOR (SCIM).
2 NEMA MG-1, MG-13230/460V (208V DE-RATING OPERATION)60 HzAEEANE: 1HP~200 HPAEEANE-CF/AEVANE-CF: 1HP~100 HPAEEANE:3600 900 (2~8 POLES).AEEANE-CF/AEVANE-CF: 3600~1200 (2~6 POLES).CONTINUOUS, (SI, MCR)AEEANE:143T~449T&TSAEEANE-CF/AEVANE- CF:143TC~ ENCLOSED ( IP 44 )SELF EXTERNAL FAN, SURFACE COOLING (IC 411).AEEANE:HORIZONTAL FOOT MOUNTING F-1 ( IM 1001), F-2 :C-FACE MOUNTED WITH FOOT ( IM 2101), F-1,F-2 INTERCHANGEABLE. AEVANE-CF:C-FACE MOUNTED (IM 3611).SHADOW, NON-HAZARDOUS. -15 ~40 LESS THAN 90% RH (NON-CONDENSATION).LESS THAN 3,300 FTBELT SERVICE, HOWEVER, 2 POLE 25HP AND UP COUPLING SERVICE IS THE VOLTAGE DIRECT ON LINE OR - MOUNTING, VACUUM DE-GASSED HIGH QUALITY OPEN BEARINGS FOR FRAMESIZE OF 284TS AND 286TS(C)~405TS(C), GREASE PRE-PACKED SHIELDED ROLLINGBEARINGS FOR THE STEEL FOR FRAME SIZE OF 143T~405T, CAST IRON FOR THE OTHERS, LARGERSIZE, CAN BE SET 90 APART, WITH CLEARANCE HOLE CABLE ENTRANCE, F-1 LEADS FOR FRAME SIZE 404T(C) AND UP, 9 LEADS FOR THE OTHERS, WITHSOLDERLESS LUG TERMINALS.
3 CLASS F INSULATION SYSTEMPHENOLIC RUST PROOF BASE PLUS LACQUER SURFACE FINISHED PAINTING IN BLUE-GRAY COLOR (MUNSELL 4/2).AEEANE:ISO METRIC : ISO METRIC SYSTEM, UNLESS THE TREADS IN MOUNTING METHOD B AND FULL VOLTAGE MEASURING STARTING : NOT TO EXCEED 90 RISE BY RESISTANCE METHOD AT ; 80 RISE : NOT TO EXCEED 90 AT FOR FRAME SIZE 143TC TO 365 TSC, BY RESISTANCE METHOD, NOT TO EXCEED 115 FOR FRAME SIZE 404TC TO 405 TSC, BY RESISTANCE SYN. FOR 1 MIN. (2,4 POLE)150% SYN. FOR 1 MIN. (THE OTHERS)160% RATED TORQUE FOR 15 OF MOTORDESIGN STANDARDVOLTAGEFREQUENCYOUTPUT (SYN.)TIME DUTYFRAME ENCLOSURECOOLING METHODMOUNTINGPLACETEMPERATUREHUMIDITYAL TITUDEDRIVE METHODDIRECTION OF ROTATIONMETHOD OF STARTINGBEARINGTERMINAL BOXLEAD TERMINALSTATOR INSULATIONPAINTINGBOLT THREADTEST PROCEDURETEMPERATURE RISEOVER SPEEDOVER TORQUEFULLEFFICIENCY(%)POWER FACTOR(%)CURRENTTORQUEROTOR NEMAHPLOADFRAMEFULL LOAD3/42/4 FULL3/42/4 FULL LOCKED FULL LOCKED (A)(A)
4 Lb-ft%FLT%FLT% 30 290 250 340 30 280 250 350 40 370 340 370 40 280 250 320 40 200 180 330 50 370 340 380 50 270 200 300 50 210 190 340 64 300 270 350
5 64 220 160 350 64 200 180 310 92 270 230 340 92 215 135 310 92 215 200 340 127 230 200 300 127 240 175 300 127 240 210 265 162 220 170 270 162
6 200 155 255 162 250 200 270 232 210 155 250 232 220 155 250 232 230 190 240 290 210 160 240 290 210 160 250 290 220 180 230 365 200 170 250 365 225 160 230
7 365 210 180 230 435 205 155 245 435 220 180 250 435 220 170 230 580 170 140 250 580 210 165 220 580 215 180 230 725 160 145 260 725 205 165 225 725
8 200 180 200 870 140 130 240 870 200 165 250 870 210 190 260 1085 1085 1085 1450 1450 PERFORMANCE DATA(460V) CONNECTION DIAGRAMS MOUNTING ARRANGEMENT(IM)Totally-Enclosed Fan-Cooled Horizontal Foot-Mounted, Type (HP) (EH)
9 6P8PE2F/2F1 2515
