Infrared CO2 Sensor Module (Model: MH-Z19B)

1 Zhengzhou Winsen Electronics Technology Co., Ltd Infrared CO2 Sensor Module (Model: MH-Z19B). User's Manual (Version: ). Valid from: Zhengzhou Winsen Electronics Technology Co., Ltd ISO9001 certificated company Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China! Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual's copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can't spread through electronic, copying, record ways.

2 Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the Sensor , we shall not be responsible for the loss. The specific such as color, appearance, sizes &etc., please in kind prevail. We are devoting ourselves to products development and technical innovation, so we reserve the right to improve the products without notice. Please confirm it is the valid version before using this manual.

3 At the same time, users' comments on optimized using way are welcome. Please keep the manual properly, in order to get help if you have questions during the usage in the future. Zhengzhou Winsen Electronics Technology CO., LTD. Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China! Zhengzhou Winsen Electronics Technology Co., Ltd MH-Z19B NDIR CO2 Module 1. Profile MH-Z19B NDIR Infrared gas Module is a common type, small size Sensor , using non-dispersive Infrared (NDIR). principle to detect the existence of CO 2 in the air, with good selectivity, non-oxygen dependent and long life.

4 Built-in temperature compensation; and it has UART output and PWM output. It is developed by the tight integration of mature Infrared absorbing gas detection technology, precision optical circuit design and superior circuit design. 2. Applications *HVAC refrigeration *Air cleaner device *Indoor air quality monitoring *Smart home *Ventilation system *School 3. Main Features Chamber is gold plated, water-proof and anti-corrosion High sensitivity, low power consumption Good stability Temperature compensation, excellent linear output Multiple output modes: UART, DAC, PWM. Long lifespan Anti-water vapor interference, anti-poisoning 4.

5 Structure Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China! Zhengzhou Winsen Electronics Technology Co., Ltd Terminal connection type: Unit: mm Pins connection type: Pins connection type: Pin Pin Definition Vin Positive pole of power (Vin). GND Negative pole of power (GND). Vo Analog output( ~2V). PWM PWM. HD(zero point calibration, low level Hd lasting for over 7s is effective). Rx UART(RXD)TTL Level data input Tx UART(TXD)TTL Level data output Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China!

6 Zhengzhou Winsen Electronics Technology Co., Ltd Terminal connection type: Pin Terminal pin Definition Pin 1 Anolog Output Vo ( ~2V). Pin 2 None Pin 3 Negtive Pole(GND). Pin 4 Positive Pole(Vin). Pin 5 UART(RXD)TTL Level data input UART(TXD)TTL Level data Pin 6. output Pin 7 None Note: The analog output Vo has a default output range of ~ 2V. It is configurable from 0V to 3V. 5. Detection range and accuracy Detection Gas Formula Detection Range Accuracy 0~2000ppm Carbon Dioxide CO2 0~5000ppm (50ppm+5% reading value). 0~10000ppm 6. Main parameters Model No. MH-Z19B. Detection Gas CO2. Working voltage ~ V DC.

7 Average current < 20mA (@5V power supply). Peak current 150mA (@5V power supply). Interface level V (Compatible with 5V). Detection Range 0~2000/5000/10000ppm(optional). Serial Port (UART) (TTL level ). PWM. Output signal Analog output(DAC) (default ~2V). (0~3V range could be customized). Preheat time 3 min Response Time T90 < 120 s Working temperature -10 ~ 50 . Working humidity 0 ~ 90% RH (No condensation). Weight 5g Lifespan > 5 years Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China! Zhengzhou Winsen Electronics Technology Co., Ltd 7. Output PWM output Take 0~2000ppm for example CO2 output range 0~2000ppm Cycle 1004ms 5%.

8 Cycle start high level output 2ms(theoretical value). The middle cycle 1000ms 5%. cycle end low level output 2ms(theoretical value). CO2 concentration: Cppm=2000 (TH-2ms)/(TH+TL-4ms). Cppm: CO2 concentration could be calculated by PWM output TH high level output time during cycle TL low level output time during cycle Serial port output (UART). Hardware connection Connect Module 's Vin-GND-RXD-TXD to users' 5V-GND-TXD-RXD. (Users must use TTL level. If RS232 level, it must be converted.). Tel: 86-371-67169097/67169670 Fax: 86-371-60932988 Email: Leading gas sensing solutions supplier in China! Zhengzhou Winsen Electronics Technology Co.

9 , Ltd Software setting Set serial port baud rate be 9600, data bit 8 bytes, stop bit 1byte, parity bit null. Commands 0x86 Read CO2 concentration 0x87 Calibrate Zero Point (ZERO). 0x88 Calibrate Span Point (SPAN). 0x79 ON/OFF Self-calibration function for zero point 0x99 Detection range setting 0x86- Read CO2 concentration Sending command Byte0 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8. Start Byte Reserved Command - - - - - Checksum 0xFF 0x01 0x86 0x00 0x00 0x00 0x00 0x00 0x79. Return value Byte0 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8. Start Byte Comman Concentration Concentration - - - - Checksum d (High 8 Byte) (Low 8 Byte).

10 0xFF 0x86 HIGH LOW - - - - Checksum CO2 concentration = HIGH * 256 + LOW. For example: Send command FF 01 86 00 00 00 00 00 79, Return value FF 86 02 20 00 00 00 00 58. How to calculate concentration: convert hexadecimal 02 into decimal 2, hexadecimal 20 into decimal 32, then 2*256+32=544ppm 0x79- On/Off Self-calibration for Zero Point Send command-No return value Byte0 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8. Start Byte Reserved Command - - - - - Checksum 0xFF 0x01 0x79 0xA0/0x00 0x00 0x00 0x00 0x00 Checksum For example: ON this function, send command: FF 01 79 A0 00 00 00 00 E6. OFF this function, send command: FF 01 79 00 00 00 00 00 86.