We strongly encourage you to read and carefully follow the instructions laid out in this Installation, Operation and Maintenance Manual and retain it for your future reference. Pay special attention to all cautions, warnings, and notices throughout this manual intended to ensure your safety. This manual covers installation, operation and ...
The Distinction Series fireplaces must be installed in accordance with these instructions. Carefully read all the instructions in this manual first. Consult the Local Gas Branch to determine the need for a permit prior to starting the installation. It is the responsibility of the installer to
Enjoy the expanded sense of space and the comfort of a unique modern fireplace. With hundreds of traditional and contemporary options to fit your style, the Montigo H Series is
• Study all safety information in this manual and on the product carefully. • Become familiar with this manual and the unit before use. • Refer to Installation for instructions on final assembly procedures. Follow the instructions completely. Save these instructions for future reference. ALWAYS supply this manual to any individual that ...
Installation and Operation Manual Manual P/N 5900041 — Manual Revision M — July 2019 Models: • HD-7P • HD-7W Designed and engineered by BendPak Inc. in Southern California, USA. Made in China. ⚠ DANGER product Read the entire contents of this manual before using this . Failure to follow the instructions and safety precautions in
Before installing, using or main taining this product, please be sure to read this manual and product warning labels carefully. Failure to follow these instructions may cause this product to malfunction, which could result in injury or damage. Below are important safety precautions that apply to this product:
This manual contains very important information about the safe installation and operation of the fi replace. Read and understand all instructions carefully before installing and operating the fi replace. Failure to follow these instructions may result …
foundation design. The installer should carefully read this manual before installing the equipment. DEKKER or your authorized dealer can provide start up assistance in most instances for a fee. Contact DEKKER for hourly/daily service rates.
Read this Manual BEFORE proceeding with installation. Failure to read and follow attached instructions or operating parameters may lead to the product’s failure and possible damage to property. Refer to enclosed warranty for operating parameters to ensure proper use with your water supply. Keep this Manual for future reference.
• Installation MUST comply with local, regional, state and national codes and regulations. • Consult insurance carrier, local building inspector, fire officials or authorities having jurisdiction over restrictions, installation inspection and permits. • Before installing, determine the following: - Where the fireplace is to be installed.
Inspection during Installation The transformer should be carefully inspected for any damage due to handling after receipt. The nameplate rating on the unit should be checked against the job specifications to ensure installation of the correct transformer. The transformer should be connected only as described on its nameplate.