Installation and Operation Manual for Intelligence …

1 Installation and Operation ManualforIntelligenceDome read the Operation Manual carefullybefore installing and using this unitSAFETY of the Menu of theDome of the dome Installation of the of the Style of stepof high data :Lighting Proof and Surge SignalProof----------------------------- ----29II:The Cleaning of Clear DownCover------------------------------- ------30 III:RS485 Bus BasicKnowledge-------------------------- ------------------31IV:W ireDiameterand Transmission Distance ComparisonChart------------------------- ---------------------------------------- ------------34V:Wire Gauge the safety and operating instructions should be read before theunitsis unit should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply you plan to use,consult your appliance dealer orlocal power company.

2 For unitsintended to operate from batterypower or other sources, refer tooperating the course of transportation, storage and Installation , theproduct should be avoided from incorrect operations such as heavypressing, strong vibration etc., which can causedamage of productas there are sophisticated optical and electronic devices inside not attempt to disassemble the camera . In order to preventelectric shock, do not remove screws or covers. There are nouser-serviceable parts follow all electrical standards for safety when it is inoperation. Adopt the particular power supply which is provided withthe unit. RS-485 and video signal should keep enough distance withhigh voltage equipments and cables when they are in for anti-lightning and anti-surging should be taken product should be indoor installedand operated to avoid rain and not use it in wet outdoorinstallation is needed, the closedprotect cover should be used and it isabsolutely prohibited to use it in open air not operate it in case temperature, humidity and power supplyare beyond the limited not let the camera aim at the sun or the object with extreme lightwhatsoever it is switched on or not.

3 Do not let the camera aim at ormonitor bright and standstill object for a long Do not use aggressive detergent to clean the main body of thecamera. Wipe dirt with dry cloth. If needed, mild detergent can beused Operate the intelligent speed dome camerawith great care to avoid shock or vibration. Itoperate incorrectly, the Speed dome couldbe not place this unit on an unstable stand,tripod, bracket, or mount. The unitmay fall, causing serious injury toa person and serious damage to the unit. Use only with a stand,tripod, bracket, or mount recommended by the manufacturer or soldwith the product. Any mounting of the unit should follow themanufacturer s instructionsand should use mounting accessoryrecommended by necessary, use a commercial lens cleaning paper toclear the lenswindows. Gently wipe the lens window until intelligent dome camera is a hi-tech CCTV product whichincorporates high-clarity color camera , panoramic speed-variablePAN/TILT, multifunctional decoder, universal character generator,CPU processor, memory chip into a whole.

4 It can largely reduceconnection and Installation processes of components in the system,rise up reliability of the system and facilitate Installation andmaintenance. Therefore it has advantages of beautiful appearance,compact structure and easy Multi-Protocol integrated decoder and multi-protocol, it can integrate 16kinds of communication protocols in maximum. As its baud rateof communication can be adjusted, it is compatible with manynormal systems by easy setup inside the dome camera , so ithas stronger serial control: addresses of camera Speed-Variable 360 horizontally and continuously with unlimitedpositions and anadjustable speed from /s;Middle-speed 0-30 /s, low speed ~ 15 /s turning 0-90 vertically with a speed up to 120 /s Middle/low speed handcontrol speed: 0 ~ 15 stably at low speed with super lower noise. Pictureshave no speeddomeautomatic180 flip and panoramicmonitoring without blind point, the location precision up to ,Middle/lowspeedthe location precision up to Intelligent much as 128 preset positions can be presetwith camera can scan horizontally betweentwo pointsand scanspeed can be modified.

5 The positions of linear scan areoptional and the dome camera can scan the range larger orsmaller than 180 between any two points with sets of programmable tour locuswith 16 position running speed and the detention time are adjustablerespectively; communication protocolsare integrated inside the dome camera with selectable baudrate from 2400 bps to 19200 dome camera can simulate the PTZ route operatedbyyou in 40 seconds bythe self-learning function of the locuswithpowerless memory;. humane structure of the menumakes all setups and programming of the dome camera moreconvenient and pan speed dome will depend on theamount of zoom. At telephoto zoom settings, the pan and tiltspeeds will be slower for a given amount of joystick deflectionthan at wide zoom settings. This keeps the image from movingtoo fast on the monitor when there is a large amount of slowing does not happen when going to a preset, but doesoccur in turbo mode when high zoom is selected.

6 The minimumpan and tilt speeds are degree per second at full of the camera (icons can be displayed on thescreen when the option DISPLAY of the camera is ON Onlyfor 18 camera ) of theFocus Control Mode: the user can adjustthe focus of the camera manually. When the camera is onnearfocus, the iconappears on the screen; when on the neareststate, the iconappears while on the far focus, the ofBacklight Compensation:when the object to beshotis dark and looks dim, the user can open the backlightcompensation according to actual need and the iconappears on the ofWhite Balance:when the image has colordistort on the screen, the user can set differentmodes by are 6modes for options: Indoor Mode Outdoor Mode Touch Mode Automatic Trace ofWhite Balance ATW Manual WB-MAN ofZOOM Control: user can pull near or pushfar the lens according to actual conditions, and the symbolappears on the screen in which the front partmeans optical multiplication while the rear part means ofElectronic Shutter: it is fixed on 1/50 sec afterinitialization when the camera is switched on, and the digital 50appears on the of Image Effect.

7 The camera works on OFF state undernormal condition and no image effect symbol appears on thescreen. When B&W appears on the screen, it means thecamera is on black and white Mode: setup of illumination: It is used only when the externalbrightness is extremely low. Normally the camera works on theautomatic state. In case the external brightness is lower than1 Lux, the camera can be switch to the Zero illumination stateautomatically and iconappears on the screen. You can alsoset the Zero illumination state Operation of the preset 64 or call preset 1 twice within 4 seconds to enter themain menuby the control keyboard or by the the menu is displayed on the screen, operate TILT UP , TILT DOWN to move the cursor to the option to be set, operate PAN LEFT , PAN RIGHT to modify the content or the order toenter this the joystick in one direction for over 1 second to speed setups on the menu couldn t be lost even power utilizations can be seen on the descriptions of functions ofthe menu in of the SETUP:to enter the submenu ofdisplay of the screen by which ID display,title display of preset point and display ofcamera screen can be SETUP:to enter the submenu ofsetup of normal data of SETUP:to enter the submenuof setup of control data over the MASK SET.

8 To enter the submenu of setup of maskfunction of :to enter the setup of enhanced function of camera :PAL/NTSC switching to suit the SET:to reset default setup of RESET:to reset the dome :to quit the main :when it is set at ON,address of dome camera appears onthe screen such as CAM 001 . Thedefault setting is POS:to set the display position ofaddress on one of following corners:TOP-L, TOP-R, BOTT-R and DIS:when it is set at ON, the title of preset point appearson the left of screen such as " ABCDEFGH when thepreset point is called. The modification of title of preset point isset onP R O G R A M o p t i o n . POS:to set the display position of title of preset pointfromLine 1 to Line 10. Line 1 is at the top of :when it is set at ON, the camera screen will :to return to MAIN SHUTTER:frame accumulation screen is opened under automaticstate, ASS displays on LIGHT:backlight SHOT:low shooting : setup of automatic iris :setupof digital zooming : setup of automatic focusing SET: setup of white balance.

9 ATW / INDOOR / OUTDOOR /ONEPUSH / AUTO / OF :return to MAIN FLIP:180 automatic flip of domecamera :ALARM ON/OFF OPTION:enter the submenu ofautomatic home HOME:when it is set at ON,home function is available, namely, thedome camera will return HOME if user has no action in aperiod of time. The dome camera shall not return HOME if it ison tour no HOME is needed when the dome camera isstopped, set the option at POS:HOME means return home. For example to setone scene as HOME, call the scene first and set it as presetpoint, then call out the menu to enter into this submenu,changefigures after HOME POS into 5. If automatic HOME function is needed, do not forget to set AUTO HOME at option display 1 50/RESTORE/PATROL1 1 50 meanspreset position from 1 to 50; RESTORE means return back tobefore state ( Manual control); PATROL1 means run the TIME:to set the time of automatic HOME, which meansthe camera shall return HOME if it is not controlled in a periodof time which can be from 1 to 99 :return to the menu one level :return to MAIN MASK PRIVACY: SHADE:BLACK/ REGION:6 or 2 privacy zonemasking.

10 (only for part of camera ) :return to Main PAN START POS: To set startposition of auto scan between twopoints. To move the dome camera byjoystick after entering and to return byCLOSE PAN END POS:To set endposition of auto scan between twopoints. To move the holder by joystick after entering and to returnby CLOSE AUTO PAN:Auto scan function between two points. First ofall, you must set the start position and the end position of autoscan. If the start position isjust the endposition, it means 360 scan. The speed of auto scan has six grades: FAST / NORMAL /SLOW /-FAST /-NORMAL /-SLOW in which the first threegrades are scan less than 180 while the later three gradeslarger than 180 . Adjust speed by PAN LEFT/PAN RIGHT, andoperate and exit by OPEN button. The start position and the endposition of auto scan are set by options 1 and 2 in this TITLE: to edit titles of preset position.