INSTALLATION INSTRUCTIONS - Doors On-Line

1 165 Carriage Court, Winston Salem, NC INSTALLATION INSTRUCTIONSA marr Residential Steel Garage Doors Entrematic manufactures & distributes garage Doors under several brand names and trademarks, such as: Amarr , Heritage , Classica , Stratford , Oak Summit and other consumer brands and product names. AGD Rev A 6/7/14 FORM #99295090 PRINTED IN USAT able of ContentsPage 1 - Table of ContentsPage 2 - Safety Informa on and WarningsPage 3 - Safety Informa on and Warnings (con nued)Page 4 - Parts Index and Quan esPage 5 - Parts Index and Quan es (con nued)Page 6 - Preparing the Jamb and Spring Pad / Parts RequiredPage 7 - Installing Hardware on the Sec onsPage 8 - Stacking Sec ons in the Opening / Installing Ver cal TrackPage 9 - Stacking Sec ons (con nued)

2 Page 10 - Stacking the Top Sec on / Installing StrutsPage 11 - Garage Door Opener Bracket - Required for Triple Layer Doors Page 12 - Strut Informa on and installa onPage 13 - Installing the Horizontal Track and Comple ng the Installa onPage 14 - Track Hanger Installa on (track parallel to joists)Page 15 - Track Hanger Installa on (track perpendicular to joists)Page 16 - Torsion Spring Installa on Page 17 - Slide Lock Installa on (not to be used with electric opener)Page 18 - Perimeter Seal / Stop MoldingPage 19 - Low Head Room Torsion to the Front Installa onPage 20 - Low Head Room Torsion to the Rear Installa onPage 21 - Extension Spring Installa on - Standard Li Page 22 - Extension Spring Installa on - Low Head RoomInstaller: A er installa on is complete, a ach all warning labels, and tags where indi-cated and place this manual near the of installa on:_____Installed by:_____Notes:_____For replacement documents, parts, or ques ons about installa on, call 1-800-503- DOORH ours of Opera on: Monday - Friday 7am to 7pm Central Time Saturday 8am to 4:30pm Central TimeREAD THE ENTIRE INSTRUCTIONS BEFORE USING THIS PRODUCT.

3 FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS DOCUMENT CAN RESULT IN SERIOUS INJURY OR DEATH. KEEP THE INSTRUCTIONS IN A SAFE LOCATION FOR FUTURE REFERENCE. ALSO READ THE OWNERS MANUAL (PROVIDED SEPARATELY).Installa on Instruc ons are available at no charge from Amarr, call toll free , or online at 1 Table of ContentsOverview of Safety Guidelines and Your Responsibili es:WARNING2 SafetyInforma onCAUTIONNOTICEOVERHEAD CRUSH HAZARDWEAR HARD HATWEAR GLOVESWEAR SAFETYGLASSESREAD THIS MANUALPROHIBITION1. Overhead garage Doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on you thoroughly reading and understanding these instruc- ons and the owners manual (provided separately).

4 If you have ques ons or do not understand the infor-ma on presented, call Most garage door incidents are caused by failure to observe basic safety rules or precau ons. An incident can o en be avoided by recognizing poten ally hazardous situa on before an incident occurs. A person must be alert to poten al hazards. This person should also have the necessary training, skills andtools to install the door This is the safety alert symbol. It is used to alert you to poten al personal injury hazards. The meaning of this safety alert symbol is as follows: A en on! Become Alert! Your Safety may be at Risk. The message that appears under the warning explains the hazard and can be either wri en or pictorially Obey all safety messages that follow the Safety Alert symbol to avoid possible personal injury or death.

5 The hazards are iden fied by the Safety Alert Symbol and followed by a signal word such as WARNING or CAUTION . For your convenience, the signal words and defini ons are provided below: WARNING: Indicates a hazardous situa on which, if not avoided, could result in death or serious bodily injury. CAUTION: Indicates a hazardous situa on which, if not avoided, could result in minor or moderate bodily injury. NOTICE: Indicates a situa on that could result in equipment related damage. Safety Symbols The following safety symbols appear throughout this manual to alert you to important safety hazards and precau ons to prevent Every possible circumstance that might involve a poten al hazard cannot be an cipated.

6 The warnings in this publica on and on the product are, therefore, not all inclusive. If a tool, procedure, work method or opera ng technique that is not specifically recommended by Entrema c is used, you are responsible that it is safe for you and for others. You are responsible that the product will not be damaged or be made unsafe by the opera on, lubrica on, maintenance or repair procedures that you Safety Guidelines:3 SafetyInforma on DO NOT permit children to operate the garage door or door controls. Severe or fatal injury could result should a child become entrapped between the door and the floor. DO NOT a empt to adjust, repair or alter any part of the garage door, especially to springs, spring brackets, bo om corner brackets, fasteners, counterbalance li cables or supports.

7 Installa on and repair work MUST be performed by a trained garage door technician. RED fasteners must be used where required. These fasteners hold parts which are under extreme tension. RED fasteners are not to be loosened or removed. DO NOT stand or walk under a moving garage door. Keep door fully in view and free of obstruc ons when opera ng. DO NOT place fingers or hands into open sec on joints or track when garage door is moving. WARNING LABELS are important parts of the garage door(s). Place warning labels as indicated to the right, so that they are not obstructed and can be easily read. DO NOT remove, cover or paint over the labels. Users should inspect labels periodically for legibility and should order (free of charge) replacement labels from Amarr, as needed.

8 Please call toll free or email The following four warning labels should be present on or around garage door assemblies: 1. Spring Warning Label, a ached to the spring assembly; 2. General Warning Label, a ached to the back of the garage door panel; 3. Warning Label for Garage Door Opener (provided separately with opener) a ached to the wall in the vicinity of the wall control bu on, and; 4. Bo om Bracket Tension Warning Label, a ached above the garage door s bo om General Warning Label4. Bo om Bracket Tension Warning Label3. Wall Warning Labelfor Door Opener1. Spring Warning LabelNOTICE REMOVE pull down ropes and disable locks on electrically operated garage Doors . ALWAYS wear work gloves and safety glasses duringinstalla on.

9 INSPECT Doors and hardware monthly for worn andor broken parts. TEST electric garage door opener s safety features monthly, according to manufacturer s instruc ons. DO NOT hang tools or materials from horizontal tracks. DO NOT install the garage door on windy days. Garage door could fall during the installa on causing severe or fatal injury. This garage door MAY NOT meet the building code wind load requirements in your area. Contact your local building official for wind load code requirementsand building permit informa 41/4 x 5/8 UNIVERSAL SCREWS1/4 x 3/4 UNIVERSAL SCREWS(RED - TEK)1/4" x 5/8" TRACK SPLICE BOLTS1/4" x 20 SERR. WASHER HEAD NUTS5/16" x 1 5/8" LAG BOLTS (RED )3/8" x 3/4" LSC BOLTS3/8" x 1 1/2" MACHINE BOLTS Fasteners (Actual Size) Minimum Quan ty Required1/4"-20 x 2-1/2" Low Shoulder Carriage Bolt1/4"-20 x 1-5/8 (for 1-3/8 thick Doors )

10 Low Shoulder Carriage Bolt3/8" - 16 Hex Nut3/8" - 16 RED Hex Nut5/16" x 1 5/8" LAG BOLTS 3 Sec onGarage Door4 Sec onGarage Door 1 2 3 34 42 70 Center S les # Fasteners 1 2 3 4 46 58 80 130 1 2 3 4 58 74 100 154 48 10622 1222248 10622 1222248 10622 12222 5 Sec onGarage Door1-5/8 2-1/2 NOTICEA Windload specific drawing will accompany your garage door showing where the extra parts are 5 Minimum Hardware RequiredUp to 8 Tall(Not Actual Size)( Hardware for Torsion Spring Only) Your door kit may contain more parts than shown here.