Insulation Coupling Catalog - American Mechanical Insulation

1 Insulation Coupling CatalogThe Klo-Shure Insulation Coupling reduces the time required to insulate copper tubing used for refrigerant lines, hot and cold water plumbing, and chilled water systems. They are easy to install. The Klo-Shure Insulation Coupling can be slit open to facilitate installation, and later secured with the provided metal clip. They also can be used unopened by sliding the Coupling over tubing as it is installed. The new 9-Series Strut Mount is specifically designed for fiberglass Insulation and available in copper tube or IPS sizes. No special tools, glue or tape required. Klo-Shure Couplings are recommended for pipe fitters to support and level tubing during installation. This will allow Insulation to be secured in seconds.

2 Contact Klo-Shure Co. for a distributor in your in USAKlo-Shure Insulation CouplingsThe patented Coupling allows sections of closed-cell, elastomeric or fiberglass Insulation to be secured at suspension points. This eliminates having to double wrap, glue and tape Insulation . The Klo-Shure Coupling can also be used to simply join and secure two lengths of Klo-Shure With Klo-Shure clevis systemLocks the Coupling into clevis strut mountSupports and secures tubing in strut mounted strut mountFor fiberglass Insulation . Available for copper tube and IPS strut mountInstalls in seconds without metal Features Meets the 25/50 flame spread/smoke developed index. Made in USA Complete vapor barrier at suspension points without gluing or taping.

3 Three times faster installation of closed-cell elastomeric and fiberglass Insulation . Dramatically improved finished appearance of insulated tubing. Eliminates Insulation compression at suspension points. For use with strut mounted clamps and clevis hangers. Currently available for 1/4" to 4-1/8" OD tube and 3/8" to 1-1/2" wall Insulation . Manufactured from high strength TPO plastic. Available with 304 or 316 stainless steel and can be opened for placement around tubingCoupling sizes available to secure Insulation from 3/8" to 1-1/2" thickSupports copper tubing from 1/4" to 4-1/8" outer diameterClevis style has metalclip provided to securely reclose couplingClevis style couplingStrut mounted Coupling is supplied with clamp halves, fastener and locknut Klo-Shure Insulation Couplings specification and installation data All insulated copper tube and iron pipe lines are to be secured using resilient Klo-Shure Insulation Couplings and Hydra-Zorb anchor channel.

4 Tubing supported and secured by internal part design. Insulation is to be inserted inside Coupling with Insulation contacting internal wall. Secondary operations (glue and tape) are not needed. Entire assembly can be assembled or disassembled with a single hand or power wrench. Proudly manufactured in the USA. Coupling spacing should be no more than 60 diameters. Keep conductor runs as straight as possible. Overwrap of Klo-Shure Coupling with elastomeric Insulation is not required. Adhesives and tape are not required. 7 and 9-series acceptable for horizontal and vertical recommendations clevis system7-series strut mount9-series strut mount8-series strut mountpart numbers728162first digit7 = seriessecond digit2 = strut mount0 = clevisthird digitinsulation wall thickness based on 1/8" increments3 = 3/8"4 = 1/2"6 = 3/4"8 = 1"9 = 1-1/2"7-series strut mount Insulation CouplingsKlo-Shure strut mounted parts include the Klo-Shure Coupling , clamp halves with welded fastener and locknut.

5 For use with elastomeric Insulation . last three digitsouter diameter of the tubing/inner diameter of Klo-Shure Coupling (decimal equivalent in inches)Klo-Shure Strut Mounted Coupling for3/8" wall Insulation 1/4" ID 723025 3/8" ID 723037 1/2" ID 723050 5/8" ID 723062 3/4" ID 723075 7/8" ID 723087 1" ID 723100 1-1/8" ID 723112 1-3/8" ID 723137 1-5/8" ID 723162 2-1/8" ID 723212 a *b-Klo-Shure ID c-overall dimension part no. All Klo-Shure couplings consist of a 6-digit part number. The following example indicates the breakdown of typical part numbers. ( strut mounted part number for 1 5/8" tube with 1" wall Insulation .)

6 *Klo-Shure ID equals copper tube OD. Klo-Shure Strut Mounted Coupling for1/2" wall insulationKlo-Shure Strut Mounted Coupling for3/4" wall insulationKlo-Shure Strut Mounted Coupling for1" wall Insulation 3/8" ID 724037 1/2" ID 724050 5/8" ID 724062 3/4" ID 724075 7/8" ID 724087 1" ID 724100 1-1/8" ID 724112 1-3/8" ID 724137 1-5/8" ID 724162 2-1/8" ID 724212 2-5/8" ID 724262 3-1/8" ID 724312 3-5/8" ID 724362 4-1/8" ID 724412 1/4" ID 726025 3/8" ID 726037 1/2" ID 726050 5/8" ID 726062 3/4" ID 726075 7/8" ID 726087 1-1/8" ID 726112 1-3/8" ID 726137 1-5/8" ID 726162 2-1/8" ID 726212 2-5/8" ID 726262 3-1/8" ID 726312 3-5/8" ID 726362 4-1/8" ID 726412 5/16" ID 728031 3/8" ID

7 728037 1/2" ID 728050 5/8" ID 728062 7/8" ID 728087 1-1/8" ID 728112 1-3/8" ID 728137 1-5/8" ID 728162 2-1/8" ID 728212 2-5/8" ID 728262 3-1/8" ID 728312 3-5/8" ID 728362 4-1/8" ID 728412 5/16" ID 729031 3/8" ID 729037 1/2" ID 729050 5/8" ID 729062 7/8" ID 729087 1-1/8" ID 729112 1-3/8" ID 729137 1-5/8" ID 729162 2-1/8" ID 729212 2-5/8" ID 729262 3-1/8" ID 729312*Note: Klo-Shure ID equals copper tube OD. Chart indicates Coupling sizes currently available from Klo-Shure . All metal parts have Tri-Valent plating. * Please contact Klo-Shure for 304 or 316 stainless steel hardware Strut Mounted Coupling for1-1/2 " wall Insulation a *b-Klo-Shure ID c-overall dimension part no.

8 New new new8-series strut mount Insulation CouplingsThe Klo-Shure 8-series Coupling allows the installer to insert the Klo-Shure Coupling into channel and lock the top. No metal clamps needed. For use with elastomeric Insulation . Optional hand tool is Coupling for 1/2" wall insulationKlo-Shure Coupling for3/4" wall insulationKlo-Shure Coupling for1" wall Insulation 1/2" ID 824050 5/8" ID 824062 7/8" ID 824087 1-1/8" ID 824112 1-3/8" ID 824137 1-5/8" ID 824162 2-1/8" ID 824212 5/8" ID 826062 7/8" ID 826087 1-1/8" ID 826112 1-3/8" ID 826137 7/8" ID 828087 1-1/8" ID 828112 1-3/8" ID 828137 1-5/8" ID 828162 2-1/8" ID 828212 2-5/8" ID 828262 part numbersfirst digit8 = seriessecond digit2 = strut mountthird digitinsulation wall thickness based on 1/8" increments3 = 3/8"4 = 1/2"6 = 3/4"8 = 1"All Klo-Shure couplings consist of a 6-digit part number.

9 This shows the breakdown of typical part numbers: ( Strut mounted Coupling for 1-3/8" tube with 1/2" wall Insulation )last three digitsouter diameter of the tubing/inner diameter of Klo-Shure Coupling (decimal equivalent in inches)824137 a *b-Klo-Shure ID c-overall dimension part no. *Note: Klo-Shure ID equals tube OD. 8-series strut mount Insulation Couplings a *b-Klo-Shure ID c-overall dimension part no. 9-series strut mount Insulation CouplingsIncludes Klo-Shure Coupling , clamp halves with welded fastener and locknut. For use with fiberglass Insulation . Klo-Shure Strut Mounted Coupling copper tube sizes for1/2" wall fiberglass insulationKlo-Shure Strut Mounted Coupling copper tube sizes for1" wall fiberglass insulationKlo-Shure Strut Mounted Coupling copper tube sizes for1-1/2" wall fiberglass insulationKlo-Shure Strut Mounted Coupling iron pipe sizes for1/2" wall fiberglass insulationKlo-Shure Strut Mounted Coupling iron pipe sizes for1" wall fiberglass insulationKlo-Shure Strut Mounted Coupling iron pipe sizes for1-1/2" wall fiberglass Insulation 5/8" ID 924062 7/8" ID 924087 1-1/8" ID 924112 1-3/8" ID 924137 1-5/8" ID 924162 2-1/8" ID 924212 5/8" ID 928062 7/8" ID 928087 1-1/8" ID 928112 1-3/8" ID 928137 1-5/8" ID 928162 2-1/8" ID 928212

10 2-5/8" ID 928262 3-1/8" ID 928312 7/8" ID 929087 1-1/8" ID 929112 1-3/8" ID 929137 1-5/8" ID 929162 2-1/8" ID 929212 1/2" Pipe ( ) 924084 3/4" Pipe ( ) 924105 1" Pipe ( ) 924131 1-1/4" Pipe ( ) 924166 1-1/2" Pipe ( ) 924190 1/2" Pipe ( ) 928084 3/4" Pipe ( ) 928105 1" Pipe ( ) 928131 1-1/4" Pipe ( ) 928166 1-1/2" Pipe ( ) 928190 2" Pipe ( ) 928237 2-1/2" Pipe ( ) 928287 1/2" Pipe ( ) 929084 3/4" Pipe ( ) 929105 1" Pipe ( ) 929131 1-1/4" Pipe ( ) 929166 1-1/2" Pipe ( ) 929190*Note: Klo-Shure ID equals copper tube OD. Chart indicates Coupling sizes currently available from Klo-Shure . All metal parts have Tri-Valent plating.