INTEGRATED LOUVRE SYSTEMS STANDARD ... - Gilberts …

1 STANDARD LOUVRESINTEGRATED LOUVRE SYSTEMSCI/SFB ( ) Xh LOUVRES 2 March 201638mm PITCH LOUVRESS eries WG38 with its 38mm Pitch fixedBlades represents the smallest LOUVRE profileavailable in this system. This unit wasdesigned to provide a neat and compactappearance for smaller LOUVRE applicationscombined with a convenient low size toweight ratio for easy handling. The profile ofthe LOUVRE ensures it offers good resistanceto the ingress of rain even with its high 50%free area. Both flanged and recessedchannel frame options can be selected alongwith STANDARD bird guard, insect screen andweather cill OPTIONSWGF/38:Comprises of 16 SWG Louvres on38mm centres in a 32mm wide :Comprises of 16 SWG Louvres on38mm centres in a 38mm deep RANGEA vailable sizes range from 100mm square upto 1750mm square in one unit.

2 Above thissize Louvres are supplied as multiple unitswith a continuous appearance for assemblyon site.(NB: On multiple assemblies theFrame/Flange size increases to 50mmangle).FIXINGWGF/38:Flange screw fixing using the pre-drilled 4mm countersunk holes. Flanges canbe supplied un-drilled upon :Rear fixing cleats mounted off thehousing frame to facilitate screw fixing intoadjacent timber, masonry or STANDARD LOUVRE finish is mill finish (ie:un-treated). Polyester Powder Coatings, PVFand Anodised Finishes are also available PITCH LOUVRESFLANGE FACE FIXING DETAILS W-H Dim.

3 A Dim. Up to 500 500 to 1750 1800 & over 150 & centre fixing holes LENGTH VERTICAL MULLION OF BLADE WHEN REQUIRED Up to 750 None Over 750 - 1500 One Over 1500 One every 750 pitch2NB: If LOUVRE is powder coated,Mullion pitch must be 500mmWGF -38 WGF -38 WGC -38 WGC -3838mmPitch 8 CountersunkScrewBird Guardor Insect ScreenBird Guardor Insect ScreenMasticSeal byInstallersMasticSeal byInstallersDimension over Flanges = List Height +45mm (+0/-2mm)Dimension over Channel= List Height -10mm (+0/-2mm)Structural Opening = List Width or HeightStructural Opening = List Width or HeightDimension over Flanges = List Width +45mm (+0/-2mm)Dimension over Channel = List Width -6mm (+0/-2mm) 6mm25mm 38mmWEIGHT 9kg/m2WG-38 SERIESSERIES.

4 Flanged - WGF Channel Frame - WGCBLADE PITCH: 38mm 38 SIZE: (mm Width x Height) 1200 x 800 OPTIONS: Birdguard - BG Insect Screen - ISEXTRA OPTIONS: Weather Cill - WC WCSPECIAL FIXING OPTIONS: Rear Lug Fixing - RLF RLFBLANKING PLATE OPTIONS: STANDARD - SBP Insulated - IBPFINISH: (Please Specify) Mill Finish ( STANDARD Finish)NUMBER REQUIRED: 15 BGSBPWGC3 Structural Opening = List Width or HeightDimension over Flanges= List Height + 46mm ( 1mm)Structural Opening = List Width or Height75mm Pitch75mm PitchDimension over Flanges = List Width +49mm ( 1mm)+_Dimension over Channel = List Width -10mm ( 1mm)+_15mm15mm120mm70mm30mm5mm120mm70mmB ladeSupportClipOptional WeatherCillMullion(Where Fitted)Cleat Fixingfor Sides,Top and Bottom BladeSupportClip4mm Countersunk Fixing Holesfor No 8 Screws Mullion(Where Fitted)

5 Rear AngleCleat Fixing toHead, Jamband Cill8mmWGF-75 WGF-75 WGC-75 WGC-7538mm+_Dimension over Channel= List Height -10mm ( 1mm)+_WEIGHT 13kg/m2WG-75 SERIESSERIES: Flanged - WGF Channel Frame - WGCBLADE PITCH: 75mm 75 SIZE: (mm Width x Height) 1200 x 800 OPTIONS: Birdguard - BG Insect Screen - ISEXTRA OPTIONS: Weather Cill - WC WCSPECIAL FIXING OPTIONS: Rear Lug Fixing - RLF RLFBLANKING PLATE OPTIONS: STANDARD - SBP Insulated - IBPFINISH: (Please Specify) Mill Finish ( STANDARD Finish)NUMBER REQUIRED: 15 BGSBPWGC475mm PITCH LOUVRESS eries WG75 with its 16 SWG 75mm PitchLouvres represents the principle buildingblock for the Gilberts LOUVRE system.

6 This unit utilises a 75mm blade, a profilewhich is equally suitable for both small andlarge LOUVRE Panels, allowing for a balancedappearance across a broad spectrum ofsizes. The increased strength and rigidity of this blade over its 38mm counterpartcombined with its physical size advantagehas led to its use as the Design Basis formany of our other LOUVRE Products includingsingle doors, double doors and louvrescreens. In line with the smaller Louvres thisseries offers a high resistance to weatheringress combined with a good 50% free andboth flanged and recessed channel frameoptions can be selected along with standardbird guard and insect screen OPTIONSWGF/75:Comprises of 16 SWG Louvres on 75mm centres in a 38mm wide :Comprises of 16 SWG Louvres on 75mm centres in a 70mm deep RANGEA vailable sizes range from 300mm squareup to 2000mm square in one unit.

7 Abovethis size Louvres are supplied as multipleunits with a continuous appearance forassembly on site.(NB: On multiple assemblies theFrame/Flange size increases to 50mmangle).FIXINGWGF/75: STANDARD method is flange screwfixing using the pre-drilled counter sunkfixing holes and screws. Alternativelyflanges can be supplied un-drilled uponrequest, with achieved via fixing cleatslocated at the back of the :Self drill tapping bolt fixingthrough adjustable, fixing cleat angleslocated at the back of the STANDARD LOUVRE finish is mill finish (ie: un-treated). Polyester Powder Coatings,PVF and Anodised Finishes are alsoavailable on PITCH LOUVRES LENGTH VERTICAL MULLION OF BLADE WHEN REQUIRED Up to 1000 None 1000 - 1600 One Over 1600 One every 8005100mm PITCH LOUVRESS eries WG100 a 100mm Pitch Fixed BladeUnit represents the largest profile available inthe Gilberts System.

8 Utilising a 100mm heavyduty LOUVRE Blade the unit portrays anaturally Grand appearance making it bestsuited for the larger LOUVRE from 16 SWG extrusion theyare inherently strong and robust and offergood weather exclusion characteristicswithout sacrificing free area (50%). Bothflanged and recessed channel frame borderscan be selected along with optionalBirdguard, Insect Screen and Weather OPTIONSWGF/100:Comprises of 16 SWG Louvres on 100mm centres in a 38mm wide :Comprises of 16 SWG Louvres on 100mm centres in a 120mm deepChannel RANGEA vailable sizes range from 600mm square up to 2500mm square in one unit.

9 Above thissize Louvres are supplied as multiple unitsfor assembly on : STANDARD method is flange screwfixing using the pre-drilled countersunk fixingholes. Flanges can be supplied un-drilledupon :Screw fixing through pre-drilledholes located on the rear lip of the Louvreframe into the surround duct, timber STANDARD LOUVRE finish is mill finish (ie: un-treated). Polyester Powder Coatings,PVF and Anodised Finishes are alsoavailable on PITCH LOUVRES LENGTH VERTICAL MULLION OF BLADE WHEN REQUIRED Up to 1000 None 1000 - 2000 One Over 2000 One every 10006 Dimension over Flanges = List Width +49mm ( 1mm)+_Dimension over Channel = List Width -10mm ( 1mm)

10 +_Countersunk Fixing Holesfor No 8 Screws 8mmWGF-100 WGF-100 WGC-100 WGC-100 Structural Opening = List Width or HeightStructural Opening = List Width or Height100mm Pitch100mm PitchMullionMullionBird Guardor Insect ScreenBird Guardor Insect Screen16mm38mm16mm120mm120mm over Flanges= List Height + 46mm ( 1mm)+_Dimension over Channel= List Height -10mm ( 1mm)+_WEIGHT 24kg/M2WG-100 SERIESSERIES: Flanged - WGF Channel Frame - WGCBLADE PITCH: 100mm 100 SIZE: (mm Width x Height) 1200 x 800 OPTIONS: Birdguard - BG Insect Screen - ISEXTRA OPTIONS: Weather Cill - WC WCSPECIAL FIXING OPTIONS: Rear Lug Fixing - RLF RLFBLANKING PLATE OPTIONS: STANDARD - SBP Insulated - IBPFINISH: (Please Specify) Mill Finish ( STANDARD Finish)NUMBER REQUIRED.