IPS CARBON STEEL PIPE GROOVED FITTINGS - Lakeside Supply

1 265 Pipe FittingsFittings Ductile Iron (except as noted)C to ECto EVictaulic offers a broad line of FITTINGS in sizesthrough 24 ( mm) in a variety of straight andreducing styles. Most standard FITTINGS are cast ofdurable ductile iron to precise tolerances. Victaulicstandard FITTINGS pressure ratings conform to the rat-ings of Victaulic Style 77 STEEL GROOVED end FITTINGS are availablein Schedule 10 Type 316 stainless STEEL (Schedule 5,40 and Type 304 optionally available) in varioussizes. Fitting center-to-end dimensions will varydepending upon type and GROOVED end FITTINGS are available in alu- minum alloy 356 T6, in sizes from 1 - 8 ( mm.)No. 10No. 11No. 12No. 13No. 20No. 3590 Elbow45 Elbow22-1/2 Elbow11-1/4 ElbowTeeCross (sw) to EWgt.

2 To EWgt. to EWgt. to EWgt. to EWgt. to EWgt. sw sw 1 4-1 ,0 139,7 165,1 #### sw* #### sw* #### sw* #### sw* #### sw* to EC to EC to ECtoEC to EC to EE to E#14 , 16 , 18 , 20 , 24 ( ) elbows (90 , 45 ) are 1-1/2D long radius forged STEEL elbows No. 100 and No. 28 42 1D radius elbows contact Victaulic. Long radius 3D, 5D and 6D are available, request (s) STEEL (sw) Segmentally welded STEEL @ Gooseneck design, end-to-end dimension*Cast ductile iron FITTINGS available, contact Victaulic for CARBON STEEL PIPE GROOVED FITTINGS265 11/27/02 2:35 PM Page 265266 Pipe Fittings3D Cast ElbowsFor Abrasive ServicesC to EC to E45 Elbow 3D90 Elbow 3 DNo.

3 33 True WyeSegmentally Welded SteelC to LEC toSENo. 3045 LateralSegmentally Welded SteelNo. 60, 40, 42, 43 Cap and NipplesCap Ductile IronNipples SteelNo. 41 ANSI 125No. 45 ANSI 150No. 46 ANSI 300 Flanged Adapter NipplesNo. 100 & No. 11090 and 45 Long Radius Elbows 1-1/2 DDuctile IronC to EC to ENo. R-10 Reducing Base Support ElbowsDuctile IronNo. 48 Hose Nipple ( )SteelE to ENo. 29 MTee with Thd. BranchDuctile IronC toGEC to TENo. 80 Female Threaded AdapterDuctile IronLong Radius ElbowsSteelFabricated FittingsSteelNo. 10 Victaulic offers a broad line of segmen-tally welded FITTINGS in sizes through 24"( mm) in a variety of straight andreducing styles. FITTINGS are fabricatedof ASTM A-53 CARBON STEEL , or othermaterials by special order.

4 Victaulicsegmentally welded FITTINGS pressureratings conform to the ratings of Vic-taulic Style 77 FITTINGS are GROOVED to permit fastinstallation without field GROOVED design permits flexibilityfor easy CARBON STEEL PIPE GROOVED FITTINGS266 11/27/02 2:35 PM Page 266267 Pipe FittingsNo. 52 Reducer Threaded Small EndNo. 27 Sandpipe Tee Ductile IronNo. 50 & No. 51 Concentric/Eccentric ReducersSteel No. 25 & No. 29 Reducing TeesSegmentally Welded SteelNo. 18 & No. 19 Adapter ElbowsDuctile IronNo. 32 Tee WyeSegmentally Welded SteelNo. 30-RReducing LateralSegmentally Welded SteelNo. 32-RReducing Tee WyeSegmentally Welded SteelNo. 53,54,55 Swaged Nipples* SteelNo. 61 Bull PlugSteelNo. 21 Bullhead TeeDuctile Iron*Also available in threaded small endNo.

5 54 or threaded large end No. CARBON STEEL PIPE GROOVED FITTINGS267 11/27/02 2:35 PM Page 267268 Pipe FittingsIPS CARBON STEEL PIPE GROOVED COUPLINGSS tyle 07 Zero-Flex Rigid CouplingThe unique angle-pad design of Zero-Flex Style 07 adjusts to standard pipe and roll or cutgroove tolerances, positively clamping the pipe to resist flexural and torsional loads. Wider keysection fills more of the groove HP-70 ESCoupling with Fire-R GasketThe Victaulic HP-70ES EndSeal coupling has an oil-resistant nitrile gasket with a high modulus forresistance to extrusion. The Fire-R gasket features a stainless STEEL inner leg that provides a sec-ondary closure. Style HP-70ES with Fire-R gasket is fire tested to API 607 77 Standard Flexible CouplingStyle 77 couplings are designed with cross-ribbed construction to provide a strong component forpressure piping systems.

6 Sizes 3/4-12" ( - mm) are two-piece housings. Sizes 14 - 22"( - mm) are cast in four identical segments, with larger sizes cast in six 770 Standard Coupling for RollGrooved PipeStyle 770 couplings are designed for joining large diameter piping systems. Ranging in size from28" ( mm) to 42" ( mm), Style 770 is ideal for roll GROOVED IPS black or galvanizedsteel and stainless STEEL 75 Flexible CouplingStyle 75 is available where moderate pressures are expected or weight considerations are a to 50% lighter in weight than the Style 77, the Style 75 coupling is recommended for serviceup to 500 PSI (3450 kPa) depending on HP-70 Rigid CouplingStyle HP-70 is designed to clamp the pipe, thus providing an essentially rigid joint.

7 To achieverigidity it is necessary to torque the bolts on sizes 2 - 4 ( - mm) to 60 - 80 ft. lbs. (80 -110 N m); 14 - 16 ( - mm) to 600 and 700 ft. lbs. (800 and 950 N m), nuts on the 14 & 16 ( & mm) sizes are torqued to 600 & 700 ft. lbs. (810 & 950N m), respectively. All other sizes must be bolted securely 741 Vic-Flange AdapterANSI Class 125 & 150 FlangeSizes 2 - 12 ( - mm)Style 741 Vic-Flange adapter is designed for directly incorporating flanged components with ANSICL 125 or CL 150 bolt hole patterns into a GROOVED pipe system. Sizes 2 - 12 ( - mm)are hinged for easy handling with integral end tabs to facilitate 743 Vic-Flange AdapterGrooved pipe adapter toANSI Class 300 flangesVic-Flange Style 743 flange-to-groove adapter permits direct connection of ANSI Class 300 raisedface flanged components.

8 It can be used with flat-face flanges by removing the raised projectionson the outside face of the 741 Vic-Flange AdapterANSI Class 125 & 150 FlangeSizes 14 - 24 ( - mm)Style 741 Vic-Flange adapter is designed for directly incorporating flanged components with ANSICL. 125 or CL. 150 bolt hole patterns into a GROOVED pipe system. Sizes 14 - 24 ( - ) are cast in four (4) identical segments which interconnect as assembly is 11/27/02 2:36 PM Page 268269 Pipe FittingsVic -300 Butterfly ValvesLever LockSeries 712 Series 713 Tamper ResistantGear OperatorVic-300 butterfly valves are designed for ser-vices from vacuum to 300 PSI (2065 kPa). Vic-300 butterfly valves feature a narrow profiledisc design with a smooth, coated inner bodywhich combine for superior flow combination results in extremely lowbreak-away torque, reducing gear operator andactuator sizing and costs.

9 Standard polypheny-lene sulfide blend (PPS) coating accommodatesa wide variety of severe services (epoxy coatingor full stainless body are available for severeservices). The dual-seal disc provides bubble-tight sealing up to 300 PSI (2065 kPa) in bothdirections without added valve modifications 716 Vic-Check ValvesTypical 2-1/2 & 3" SizesTypical 4 - 14" SizesThe Series 716 check valve is available in sizes2-1/2 14" ( mm). It is a springassisted single disc design that achieves a leak-free seal with as little as 5 ft. ( m) of headand can be installed in both horizontal and verti-cal valve is factory tested to its working pres-sure of 300 PSI (2065 kPa). Drains are optionalboth upstream and downstream of the 712 & 713 Swinger Check ValveSeries 712 Swinger swing check valves havelarge closure access bonnet for internal 316 stainless STEEL clapper features a bondedbumper for coating 712 swing check valves are rated to 300 PSI (2065 kPa) 2" ( mm) size stainless STEEL model isalso 713 is available in 2" ( mm) sizerated to 1000 PSI (6900 kPa).

10 Series 779 Venturi-Check ValvesThe Victaulic Series 779 Venturi-Check valvesprovide a versatility of service unlike any flowmeasuring device. The CAD-designed hydrody-namic inlet profile provides a natural venturi aspart of the valve. The inlet is drilled, tapped andplugged, ready to receive the flow kit (included).The venturi-like taps provide much greater mea-surement accuracy than taps placed across thevalve seat. Valve turbulence and interferenceacross the valve seat need not be a considera-tion. Twin taps on both sides of the valve pro-vide positioning of measurement outlets forconvenient meter valve is factory tested and rated to 300 PSI (2065 kPa) working pressure. All sizes canbe installed in horizontal or vertical position andprovide leak-free sealing under conditions aslow as five feet ( m) of head 377 Vic-Plug Balancing ValveSeries 377 Vic-Plug balancing valve is the firsteccentric GROOVED end plug valve for throttlingservices.