ISOFLEX NBU 15 - takinotw.com

1 ISOFLEX NBU 15 Special greases for rolling bearings operating athigh speeds and loadsProduct information eEdition , replaces edition : ISOFLEX NBU 15 is a high-speedgrease with a good pressure ab-sorption capacity. It consists of acombination of ester oil / synthetichydrocarbon oil / mineral oil andbarium complex soap. It providesgood wear and corrosion protection,and is resistant to water, ambientmedia and :These lubricants are especiallysuitable for high-speed plain androlling bearings, such as spindlebearings in machine tools andtextile machines, threaded spindles,ball screws subject to high loads,running gear bearings. They arealso used as long-term greases forbearings in cableways and precisionengineering applications, and theyare suitable for the lubrication oftooth flanks in precision gears ( gears in milling machines,electromechanical valve actuators).Application notes:The lubricant is applied by brush,spatula, grease gun or greasecartridge. Owing to the differentcompositions of elastomers andplastic materials, it is indispensableto check compatibility prior to shelf life:The minimum shelf life is months if the product is stored inthe original closed container in adry sizes:50 g PE tube400 g cartridge1 kg can25 kg bucketISOFLEX NBU 15 Good pressure absorptioncapacity For high speeds Good wear protection Good corrosion protection Resistant to ageing andoxidation Good resistance to water and ambient mediaProduct data:ISOFLEXNBU 15 ColourbeigeTexturehomogeneous,short-fibr edDensity at 20 C, temperature range*, C,approx.

2 40 to 130 Drop point, DIN ISO 2176, C,approx.> 220 Worked penetration, DIN ISO 2137,(ASTM D 217); mm265 to 295 Corrosion protection (Emcor test),DIN 51 802, 1 week, distilled water,corrosion rating0/1 Base oil viscosity, DIN 51 562/1,at 40 C, mm2/s, 100 C, mm2/s, factor**(n x dm), mm x min 1, ,000,000 Apparent viscosity**,Kl ber viscosity gradeM*Service temperatures are guide values which depend on the lubricant s composition, the intended use and the applica- tion method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano- dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.**Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating conditions, which is why they have to be confirmed in tests carried out by the user in each individual case.** Kl ber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease; S = heavy lubricating grease; ES = extra heavy lubricating greaseISOFLEX NBU 15 Safety Data SheetThe data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to areader with technical experience.

3 It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with theselected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a samplefor testing. Kl ber products are continually improved. Therefore, Kl ber Lubrication reserves the right to change all the technical data in this product information at any timewithout ber Lubrication M nchen KG, a member of the Freudenberg groupPublisher and Copyright:Reprints, total or in part, are permitted if sourceKl ber Lubrication M nchen KGKl ber Lubrication M nchen KGis indicated and voucher copy is 70 10 47, D-81310 M nchenTel. (0 89) 78 76-0, Telefax (0 89) 78 Product name: ISOFLEX NBU 15 Code-No.:004 ber Lubrication M nchen KGEmergency telephone no.:Geisenhausenerstra e 7++49 - 89 7876 - 0D-81379 M nchenTel. ++49 - 89 78 76 - 0 telephone exchangeFax: ++49 - 89 78 76 - / information on ingredientsChemical characterization (preparation): Mineral oil, synthetichydrocarbon oil, ester oil, barium complex soapHazardous ingredientsComponentsValueSymbolsR-phras esBarium soap> 25 %52 identificationR phrases: 52/53.

4 Harmful to aquatic organisms, may cause long-termadverse effects in the aquatic environmentProlonged skin contact may cause skin irritation and/or aid measuresAfter inhalation: Not applicableAfter contact with skin: Wash off with mild cleaners and plenty of waterIf symptoms persist, call a physicianAfter contact with eyes: Rinse with plenty of waterIf symptoms persist, call a physicianAfter ingestion: Do not induce vomiting. Obtain medical attentionAdvice to doctor: Treat measuresSuitable extinguishing media: Water spray, foam, dry powder,carbon dioxide (CO2)Unsuitable extinguishing media: High volume water jetSpecial Hazards: In case of fire the following can be released: Carbon monoxide, hydrocarbonsSpecial protective equipment for firefighters: Standard procedure for chemical firesAdditional information: Water mist may be used to cool closed containers. In the event of fire and/or explosion do not breathe release measuresPersonal precautions: Not requiredEnvironmental precautions: Do not flush into surface water or sanitary sewer systemMethods for cleaning up / taking up: Use mechanical handling equip- ment.

5 Dispose of absorbed material in accordance with the regulationsAdditional information: and storageAdvice on safe handling: No special handling advice requiredAdvice on protection against fire and explosion: No special precautions requiredRequirements on storage rooms and vessels: Store at room temperaturein the original containerIncompatible materials: Incompatible with oxidizing agents. Do not store together with controls / personal protectionAdditional advice on system design: Not applicableIngredients and specific control parameters: NoneRespiratory protection: No special protective equipment requiredHand protection: No special protective equipment requiredEye protection: No special protective equipment requiredBody protection: No special protective equipment requiredOther protection measures: No special protective equipment requiredGeneral protection and hygiene measures: Avoid prolonged and/or repeated contact with soiled or soaked clothing immediately.

6 Clean skin thoroughlyafter work; apply skin and chemical propertiesFormpasteColourbeigeOdourchara cteristicDrop point> 220 C, DIN ISO 2176 Flash point> 200 C (base oil)Ignition temperaturenot applicableLower explosion limitnot applicableUpper explosion limitnot applicableVapour pressure-firstnot applicableDensityapprox. g/cm3, 20 CWater solubilityinsolublepH valuenot applicableKinematic viscositynot applicableFurther informationnone10. Stability and reactivityConditions to avoid: NoneMaterials to avoid: Strong oxidizing agentsHazardous decomposition products: None under normal useAdditional information: None11. Toxicological informationProlonged skin contact may cause skin irritation and/or dermatitis12. Ecological informationInformation on elimination (persistence and degradability): Product is insoluble in water. May be separated out mechanically in purification plantsBehaviour in environmental compartments: Ecological injuries are not known or expected under normal useEcotoxic effects: Toxic to aquatic organisms, may cause long-termadverse effects in the aquatic environment Additional information: Should not be released into the environment13.

7 Advice on DisposalCode of waste: 120112 Wastes from shaping and surface treatment of metals and plastics;wastes from shaping (including forging, welding, pressing, drawing,turning, cutting and filing); spent waxes and fatsDisposal: The code of waste has to correspond to the Council Directive75/442/EEC and be specific as far as the related sector and process areconcernedCan be incinerated when in compliance with local, state and federalregulations14. Transport informationGGVS / GGVE: not applicableADN / ADNR: not applicableIMDG-Code: not applicableICAO / IATA-DGR: not applicableFurther information: Not classified as dangerous in the meaning of transport regulations15. Regulatory informationLabelling according to EU-guidelines: The product is classified labelledin accordance with EC-directive 99/45/CE R phrases: 52/53. Harmful to aquatic organisms, may cause long-termadverse effects in the aquatic environment S phrases: 61.

8 Avoid release to the environment. Refer to specialinstructions/safety data sheetsLabelling according to the Swiss regulations: No toxicological class,BAGT-no. 61150016. Other informationIssue-department of Safety Data Sheet: Chemical Documentation,Tel.: ++49 - 89 7876 - 564