ISOFLEX TOPAS NCA 52 - interplus1999.com

1 ISOFLEX TOPAS NCA 52 Synthetic long-term grease for plain and rolling bearingsProduct information eEdition : ISOFLEX TOPAS NCA 52 is asynthetic long-term grease for awide service temperature consists of synthetic hydrocarbonoil and special calcium soap, and ithas good pressure : ISOFLEX TOPAS NCA 52 is suit-able for plain and rolling bearings,and for small gears subject to highspecific loads. It is also used inplastic/plastic and plastic/steelcomponents. The low base oilviscosity ensures low startingtorques even at low notes:The lubricant is applied by brush,spatula, grease gun or grease car-tridge. Owing to the different com-positions of elastomers and plasticmaterials, compatibility tests areindispensable before series shelf life:The minimum shelf life is months if the product is stored inthe original closed container in a sizes:400 g cartridge1 kg can25 kg bucketISOFLEX TOPAS NCA 52 synthetic long-term grease good pressure absorption low starting and runningtorque good wear protection resistant to oxidation andageingProduct data:ColourbeigeTexturehomogeneousshort- fibredDensity at 20 C, g/cm3, temperature range*, C, approx.

2 50 to 130 Drop point, DIN ISO 2176, C> 220 Worked penetration, DIN ISO 2137(ASTM D 217); mm265 to 295 Copper corrosion (lubricating grease ),DIN 51 811, after 24 h / 120 C,corrosion rating1 120 Base oil viscosity, DIN 51 562/1at 40 C, mm2/s, 100 C, mm2/s, factor**(n x dm), mm x min 1, ,000,000 Apparent dynamic viscosity**,Kl ber viscosity gradeL/M*Service temperatures are guide values which depend on the lubricant s composition, the intended use and the applica- tion method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechano- dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a component.**Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating conditions, which is why they have to be confirmed in tests carried out by the user in each individual case.** Kl ber viscosity grades: EL = extra light lubricating grease ; L = light lubricating grease ; M = medium lubricating grease ; S = heavy lubricating grease ; ES = extra heavy lubricating greaseISOFLEX TOPAS NCA 52 Safety Data SheetThe data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to areader with technical experience.

3 It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with theselected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a samplefor testing. Kl ber products are continually improved. Therefore, Kl ber Lubrication reserves the right to change all the technical data in this product information at any timewithout ber Lubrication M nchen KG, a member of the Freudenberg groupPublisher and Copyright:Reprints, total or in part, are permitted if sourceKl ber Lubrication M nchen KGKl ber Lubrication M nchen KGis indicated and voucher copy is 70 10 47, D-81310 M nchenTel. (0 89) 78 76-0, Telefax (0 89) 78 Product name: ISOFLEX TOPAS NCA 52 Code-No.:004 179 ber Lubrication M nchen KGEmergency telephone no.:Geisenhausenerstra e 7++49 - 89 7876 - 0D-81379 M nchenTel. ++49 - 89 78 76 - 0 telephone exchangeFax: ++49 - 89 78 76 - / information on ingredientsChemical characterization (preparation): Synthetic hydrocarbon oil, special calcium identificationNo particular hazards aid measuresAfter inhalation: Not applicableAfter contact with skin: Wash off with soap and plenty of waterAfter contact with eyes: Rinse with plenty of waterAfter ingestion: Do not induce vomiting.

4 Obtain medical attentionAdvice to doctor: Treat measuresSuitable extinguishing media: Water spray, foam, dry powder,carbon dioxide (CO2)Unsuitable extinguishing media: High volume water jetSpecial Hazards: In case of fire the following can be released: Carbon monoxide, hydrocarbonsSpecial protective equipment for firefighters: Standard procedure for chemical firesAdditional information: Water mist may be used to cool closed containers. In the event of fire and/or explosion do not breathe release measuresPersonal precautions: Not requiredEnvironmental precautions: Do not flush into surface water or sanitary sewer systemMethods for cleaning up / taking up: Use mechanical handling equip- ment. Dispose of absorbed material in accordance with the regulationsAdditional information: and storageAdvice on safe handling: No special handling advice requiredAdvice on protection against fire and explosion: No special precautions requiredRequirements on storage rooms and vessels: No special storage conditions requiredIncompatible materials: Incompatible with oxidizing agents.

5 Do not store together with foodFurther information on storage conditions: Store at room temperature in the original controls / personal protectionAdditional advice on system design: Not applicableIngredients and specific control parameters: NoneRespiratory protection: No special protective equipment requiredHand protection: No special protective equipment requiredEye protection: No special protective equipment requiredBody protection: No special protective equipment requiredOther protection measures: No special protective equipment requiredGeneral protection and hygiene measures: Avoid prolonged and/or repeated contact with skin. Remove soiled or soaked clothing immediately. Clean skin thoroughly after work; apply skin and chemical propertiesFormpasteColourbeigeOdourchara cteristicDrop point> 220 C, DIN ISO 2176 Flash point> 200 C (base oil)Ignition temperaturenot applicableLower explosion limitnot applicableUpper explosion limitnot applicableVapour pressure-firstnot applicableDensityapprox.

6 G/cm3, 20 CWater solubilityinsolublepH valuenot applicableKinematic viscositynot applicableFurther informationnone10. Stability and reactivityConditions to avoid: NoneMaterials to avoid: Strong oxidizing agentsHazardous decomposition products: None under normal useAdditional information: None11. Toxicological informationThe toxicological data has been taken from products of similar compositionAcute toxicity: LD50/oral/rat = > 2 g/kg (literature data)Chronic toxicity: NoneHuman experience: Prolonged skin contact may cause skin irritation and/or dermatitis12. Ecological informationInformation on elimination (persistence and degradability): Product is insoluble in water. May be separated out mechanically in purification plantsBehaviour in environmental compartments: Ecological injuries are not known or expected under normal useEcotoxic effects: Aquatic toxicity is unlikely due to low solubility Additional information: Should not be released into the environment13.

7 Advice on Disposal Code of waste: 120 112, Wastes from shaping and surface treatment of metals and plastics; wastes from shaping (including forging, welding, pressing, drawing, turning, cutting and filling); spent waxes and fatsDisposal: Can be incinerated when in compliance with local, state and federal regulationsDispose of contaminated packaging and recommended cleaning: Offer rinsed packaging material to local recycling facilities14. Transport informationGGVS / GGVE: not applicableADN / ADNR: not applicableIMDG-Code: not applicableICAO / IATA-DGR: not applicableFurther information: Not classified as dangerous in the meaning of transport regulations15. Regulatory informationLabelling according to EU-guidelines: The product does not require a hazard warning label in accordance with EC-directives/German regulations on dangerous substancesNational regulations16. Other informationIssue-department of Safety Data Sheet: Chemical Documentation,Tel.

8 : ++49 - 89 7876 - 564