IT4WIFI - Apollo Gate Openers

1 BusT4 - WiFi InterfaceNiceIT4 WIFIEN - Instructions and warnings for installation and use1 EnglishENENGLISHGENERAL WARNINGS:SAFETY - installation - USE CAUTION During the device s installation , it is im-portant to strictly observe all the instructions con-tained in this manual. In case of doubts of any nature, do not proceed with the installation and contact the Nice Technical Assistance Service for Important information: store these in-structions for any future product maintenance inter-ventions and disposal of the All device installation , connection, pro-gramming and maintenance operations must be car-Instructions translated from ItalianIT4 WIFIIBT4NL1L2L3P1 PRODUCT DESCRIPTION AND INTENDED USE CAUTION! This manual only describes the device s basic functions. For any additional information, consult the complete manual available on the website CAUTION! Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be considered improper and is strictly forbidden!

2 The IT4 WIFI accessory is a device that by means of Wi-Fi communication allows for controlling the movement and status of Gate&Door-type Nice automations compatible with the BusT4 (Opera) protocol. Before proceeding with the product s installation , make sure to have the following: 1 Nice automation control unit of the Gate&Door catalogue equipped with BusT4 port or connector for IBT4N 1 Wi-Fi b/g Access Point that supports the Apple Bonjour service (consult the instruction manual of the AccessPoint) 1 iPhone with iOS system (or later versions) or 1 smartphone with Android 5 (or later versions)The kit includes: IT4 WIFI device IBT4N interface RJ-11 telephone cord (6 positions - 4 contacts)ried out exclusively by a qualified technician! Do not open the device s protective casing as it containsnon-serviceable electrical circuits. Do not modify any part of the device.

3 Operations otherthan those specified may only cause malfunctions. Themanufacturer declines all liability for damage caused bymakeshift modifications to the product. Do not place the device near sources of heat nor expose it to open flames. These actions may damage the prod-uct and cause malfunctions. The product is not intended for use by persons (including children) with reduced physical, sensory or mental abili-ties, or who lack adequate experience or knowledge, un-less supervised or instructed on how to use the productby a person responsible for their safety. Make sure that children do not play with the product. Also check the warnings in the instruction manuals of the motor to which the product is connected. Handle the product with care: avoid crushing, knocks orfalls as it could get damaged. The product s packaging material must be disposed of in conformity with the local regulations.

4 The product must be used indoors or in an environmentprotected from atmospheric is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the 2EN2 installation CAUTION! Before proceeding with the installation , make sure that the place where the IT4 WIFI is installed is covered by the domestic Wi-Fi AP the power supply to the automation s control the IT4 WIFI device, insert the connector of the cable provided into the BusT4 port CAUTION! Only use the cable provided! Do not use other types of unit with BusT4 portL1L2L3P12 Control unit with IBT4N port Caution! If the IBT4N is inserted incorrectly, it may permanently damage the control unit! the automation s control IT4 WIFI has been correctly installed only if the L3 LED is a steady green.

5 The L2 LED may remain red for a few seconds and then flash green. If this does not happen, disconnect the device and reconnect it after a few EnglishENTable 1 HomeKit technologyMyNice technologyMobile devices supported- iPhone with iOS or later versions- iPhone with iOS or later versions- smartphone with Android 5 or later ver-sionsCompatible appsApple Home app available in iOS (or later versions)Nice MyNice Wel-come HK app available on Apple Store Nice MyNice Welcome app available on Google Play for smartphones with Android system or available on Apple Store for iP-hone with iOS systemMain features- Compatible with Garage Door-type Nicecontrol units that use the BusT4 protocol(Opera)- Available controls: Open, Stop, Close- Compatible with Siri- Remote-controllable (see chapter )- Compatible with all Gate&Door-type Nicecontrol units that use the BusT4 protocol(Opera)- Available controls.

6 All those involvingmovement, including partial opening- Compatible with the IFTTT service- Remote-controllable (with active connec-tion to the Internet) without the need forother devices Caution! - To use Siri and IT4 WIFI remotely, the AP must be connected to the Internet3 OPERATING TECHNOLOGYB efore configuring the IT4 WIFI through the app, select the technology to be used: the accessory is compatible with either the HomeKit or the MyNice technology (Table 1 de-scribes the main features). These two technologies can-not function simultaneously. - With an iPhone, either the HomeKit or the MyNice tech-nology can be used (Table 1).- With an Android smartphone, only the MyNice technol-ogy can be used (Table 1).The technology chosen by the first user must bemaintained by subsequent users. The type of tech-nology can only be modified by resetting the device (Chapter 5).

7 The first user to be associated with the IT4 WIFI becomes the device s administrator and can invite/enable subsequent users who desire controlling the 4EN4 INITIAL SET-UPTo configure the IT4 WIFI with the HomeKit technology: to use the Apple Home app, visit the website to use the MyNice Welcome HK app, download it from Apple Store then follow the instructions described in Chapter - Table 2 The Home app can manage all HomeKit-enabled accessories, while the MyNice Welcome HK app only manages Nice HomeKit-enabled accessories. Caution! - In the HomeKit technology, the Stop control is only available if the MyNice Welcome HK app is configure the IT4 WIFI with the MyNice in Android technology: download the MyNice Welcome app from Google Play then follow the instructions described in Chapter - Table 3To configure the IT4 WIFI with the MyNice in iOS technology: download the MyNice Welcome app from Apple Store then follow the instructions described in Chapter - Table 4 Table 2 - iPhone with iOS operat-ing system and later the MyNice Wel-come HK app and select fStart with your first Nice Accessory entering the name of a Home, from the list of accessories, select the Ni-ceIT4 WIFI xxxxxx name to be configured.

8 WWWWWW de-note the last 6 characters of the MAC appearing on the IT4 WIFI requested, frame the HomeKit code printed on the IT4 WIFI label or on the last page of this manual with the iPhone camera, or enter the code completing the set-up with the app, wait for leds L1, L2 and L3 to turn steady green. To control the automation connected to the IT4 WIFI device, select the Open , Stop , Close buttons. The change of sta-tus of the automation can be viewed on the icon If the procedure described does not terminate successfully, check that the requirements indicated at the beginning of the manual are satisfied, run the IT4 WIFI reset procedure using the P button (Chapter 5) then try - Initial set-up with HomeKit technology using the MyNice Welcome HK appTo run the procedure, the person must be near the IT4 WIFI device, led L3 must be lit steady green and led L2 kashing green.

9 Should this not be the case, run the Reset procedure (Chapter 5). Moreover, ensure that the iPhone is connected to a Wi-Fi network that supports the Bonjour this HomeKit-enabled accessory requires an iPhone with iOS or this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS or later or an iPad with iOS or later set up as a home the credentials of the network to which the accessory must be con-nected. It is important to carefully check that the parameters have been entered cor-rectly. After selecting the arrow on the top right-hand side, wait roughly 2 minutes for the procedure to the procedure termi-nates, wait for the acces-sory to appear in the app among the Wi-Fi network accessories in which it was configured and wait for leds L1 and L3 to turn steady green (led L2 may remain orange if the device cannot be reached remotely).

10 Subsequently, select it to the code stamped on the IT4 WIFI label and select the arrow on the top right-hand side to complete the set-up the set-up termi-nates, to control the auto-mation connected to the IT4 WIFI device, select the Open , Stop and Close buttons. The change of sta-tus of the automation can be viewed on the icon. Selecting the eye sym-bol allows for using all the other additional movement controls If the procedure described does not terminate successfully, check that the requirements indicated at the beginning of the manual are satisfied, run the IT4 WIFI reset procedure using the P button (Chapter 5) then try 3 - Smartphone with Android 5 operating system and later the MyNice Wel-come app and select fStart with your first Nice Accessory entering the values requested by the app (User name, Description, Home), select Add new the Wi-Fi networks have been scanned, select the NiceIT4 WIFI xxxxxx name to be configured: xxxxxx denote the last 6 characters of the MAC appearing on the IT4 WIFI label.