Joncryl DFC 3030 - xtgchem.cn

1 Joncryl DFC 3030a soft acrylic emulsion for use in food contact water-based inks and overprint varnishes* page 1 of 4 registered trademark ofBASF GroupKey features andbenefits compliant for foodcontact applications/packaging* good printability good resolubility excellent adhesion onfoil and HDPE, LDPE, OPP films high COF ultra low VOCP&P JDFC3030e/22-09-2008/B1-3supersedes P&P JDFC3030e/01-01-2008/B1-3 General informationTypical physical characteristics (not to be considered specifications)appearancesemi-translucen t %molecular weight (wt. av.)>200,000viscosity at 25 C (77 F) (Brookfield)1,150 value (on solids)65density at 25 C (77 F) g/cm3minimum film-forming temperature<0 C (<32 F)glass transition temperature Tg (DSC)-27 C (-17 F)VOC weight (by GC analysis)< %freeze/thaw-stableyes*This product may be used in paper and film coatings applications requiring contact with all foodtypes and under all use conditions except extended shelf storage after cooking in the dfc 3030 is a soft film-forming acrylic emulsion designed for the formulation of overprint varnishesand inks for food contact packaging dfc 3030 is designed for use in water-based flexo and gravure OPV s.

2 Joncryl dfc 3030 can also be used as a modifier in overprint varnish and paperboard ink formulations wherehigher COF and increased water resistance is needed to increase film-formation without the aid of VOC s JDFC3030e/22-09-2008/B1-3page 2 of 4 Joncryl dfc 3030 Typical formulation using Joncryl dfc 3030 Overprint varnishes high COF OPV formula partsPE wax emulsion* partswetting agent partswater partsJoncryl DFC partsJoncryl DFC partsJoncryl DFC parts* BASF also offers a full range of wax emulsions and dispersion further detailed application information please contact our Technical Support statusJoncryl dfc 3030 complies with the following food additive regulations published in Title 21 of the US Codeof Federal Regulations ( ), subject to any limitations stated in the regulations relating to the use of products in contact with and polymeric coatingsFor use only in contact with food types IV - A, V, VII (Table 1) under use conditions E through G(Table 2); section paragraph (d).

3 It may be used with food type VIII without use restrictions. The coating, in contact with food in its finished form, meets the extractive limitations as prescribed in paragraph (c) of this and polymeric coatings for polyolefin filmsThe finished co-polymers may contact all food types under Conditions of Use B through H asdescribed in Table 2 of 21 CFR (c), and including contact with food during cooking (initialtemperature covered by Conditions of Use A, but without extended shelf storage). of paper and paperboard in contact with aqueous and fatty foodsThe finished co-polymers may contact all food types under Conditions of Use B through H asdescribed in Table 2 of 21 CFR (c), and including contact with food during cooking (initialtemperature covered by Conditions of Use A, but without extended shelf storage).

4 Of paper and paperboard in contact with dry foodsP&P JDFC3030e/22-09-2008/B1-3page 3 of 4 Joncryl dfc 3030 BASF Nederland ChemicalsP. O. Box 3908440 AJ Heerenveen, The NetherlandsPhone+31 513 619 619 Fax+31 513 619 P&P JDFC3030e/22-09-2008/B1-3page 4 of 4 Joncryl dfc 3030 SafetyWhen handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affectprocessing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose.

5 Any descriptions,drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute theagreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights andexisting laws and legislation are dfc 3030 (22-09-2008)SafetyWhen handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affectprocessing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose.

6 Any descriptions,drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute theagreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights andexisting laws and legislation are statusJoncryl dfc 3030 can be used in inks and varnishes that need to be compliant to European Food ContactRegulations such as Framework Regulation 1935/2004, Plastics Directive 2002/72/EC and it s amendments,the Resolution AP (2004)1, the Resolution AP (2002)1, the Resolution AP (2005)2, the German BfR, the DutchWarenwet and the French Brocchure No. exact details please contact our European Product Regulatory Department at addition to the polymer systems listed in the referenced sections of the regulations, our products typicallycontain other ingredients, such as preservatives.

7 These other ingredients are either specifically listed in thereferenced sections or are authorized by the general terms of the regulation or are present in negligibleamounts. It is the responsibility of our customers to determine that their use of BASF Products is safe, lawful,and technically suitable for their applications. Laws and regulations do change over time. Customers usingthis product should regularly review the current laws and regulations.