KITCHEN ZONE

ENVIRONMENTAL PRODUCT DECLARATION - …

ENVIRONMENTAL PRODUCT DECLARATION ... European Waste Catalogue (EWC), the waste key for steel as a component of metal ceiling systems made of steel is:

  Product, European, Waste, Declaration, Catalogue, Environmental, Environmental product declaration, European waste catalogue

Installation and Maintenance Guide - Ceilings from …

2 water is present, or where moisture will come in direct contact with the ceiling. 1.4. Plenum Installation of Optima® and Lyra® Concealed panels requires a minimum of 3" of space in the plenum to install the hanger

  Guide, Installation, Maintenance, Installation and maintenance guide

AXIOM Knife Edge Perimeter Trim - Ceilings from Armstrong

Axiom Knife Edge is a perimeter trim system designed for use with any of the Armstrong suspension systems. Field fabrication is limited to component assembly, straight cuts, and minor adjustments to accommodate differences between design dimensions and actual field conditions.

  Edges, Trim, Knife, Perimeter, Axiom, Axiom knife edge perimeter trim, Axiom knife edge, Perimeter trim

50% U I ALU armstrongceilings.com/greengenie rECLEDyC ...

axiom Knife Edge alignment Clip (aXKEaLiGn) ViSuAl Selection DetAilS For more information, see submittal BPCs-3080. 5-9/16" 2-5/16" axiom Knife Edge for Vector profile Item (AXKE or AXKEV) Corner

  Edges, Knife, Knife edge

KEY SELECTION ATTRIBUTES TYPICAL APPLICATIONS COLOR …

DUNE ™ Square Lay-in & Tegular fine texture 179 Dune™ Square Lay-in panels with Prelude ® XL 15/16" suspension system (Pgs. 279-280) Dune Tegular panels with Interlude XL HRC 9/16" suspension system (Pg. 274) TYPICAL APPLICATIONS

  Unde

KEY SELECTION ATTRIBUTES TYPICAL APPLICATIONS COLOR …

Dune™ Square Lay-in panels with Prelude® XL® 15/16" suspension system (Pgs. 391-392) Dune Tegular panels with Interlude ® XL HRC 9/16" suspension system

  Unde

EXPOSED STRUCTURE - Ceilings from Armstrong

Whether making a design statement that puts acoustical materials front and center, or opting for a more open, exposed structure look with a direct-attach solution, we've got hundreds

  Structure, Exposed, Exposed structure

PART 1 - GENERAL - Ceilings from Armstrong

09120-1 SECTION 09 51 13 AXIOM® INDIRECT LIGHT COVE PERIMETER SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general conditions of Contract, including General and Supplementary Conditions and

  General, Part, Part 1 general, Part 1 general 1

Section 1 - IDENTIFICATION* * * - Ceilings from Armstrong

Page 1 of 7 Issue Date: 06/1/15 Revision 1.0000 Print Date: 5/29/2015 * * *Section 1 - IDENTIFICATION* * * Material Name: Armstrong Wood Ceilings and Walls (WoodWorks) Chemical Family. Wood particle board ceilings and walls . Recommended Use. ceilings and wall coverings .

  Identification, Section, Section 1

Solid Wood Backer, Dowel, and Backer & Dowel Combination

242 WOODWORKS ® TechLine 877 276 7876 armstrongceilings.com/woodworks WOODWORKS ® Grille Solid Wood Backer, Dowel, and Backer & Dowel Combination STANDARD SIZES

NOT SO SCARY LIGHTING MATH - RS Lighting Design

Lighting Math Room Reflectance • Surfaces with less reflectance will bounce less light • Typical Reflectance Values: – 75%-90% White, Off White, Grey, Light tints of Blue or Brown – 30%-60% Medium Green, Yellow, Brown, or Grey – 10%-20% Dark Grey, Medium Blue – 5%-10% Dark Blue, Brown. Dark Green, and many wood finishes Room Reflectance

  Lighting, Math, Not so scary lighting math, Scary, Reflectance

SBS5312 1718 05-lighting calculations - Compatibility Mode

• Room surface reflectance (ceiling, walls, floor) • Window size/s and position • Room index • K = (L x W)/(L + W) H ... lighting with regular arrays of luminaires, for 3 main room surfaces: ceiling cavity, walls, and floor cavity or horizontal reference plane.

  Surfaces, Lighting, Reflectance, Surface reflectance

Daylight Sensor Design and Application Guide

– Generally one sensor per task surface – Customer would have to buy far more sensors to cover the same area • The sensor cannot distinguish between daylight fluctuations and changes of surface reflectance Open loop In this approach to daylighting, the illumination at the daylight sensor varies. It has a wide field of view;

  Surfaces, Reflectance, Of surface reflectance

INTERIOR LIGHTING DESIGN A STUDENT'S GUIDE

The efficacy of a lighting installation in use taking account of energy saving techniques. Operating efficacy = installed efficacy x load factor. REFLECTANCE Ratio of light reflected from a surface to the light received on it. ROOM INDEX This takes account of room proportions and height of the luminaire above the working plane.

  Surfaces, Lighting, Reflectance

sheen and gloss guide - Sherwin-Williams

Gloss and sheen reflectance are measured on a scale of 0 (no gloss) to 100 (mirror-like). Reflectance is typically measured by deflecting a single beam of light at a 60 or 85 degree angle off a surface. The light is deflected into a receptor, which measures the intensity in units. The higher the number of units, the shinier the surface.

  Surfaces, William, Reflectance, Sherwin williams, Sherwin

Understanding the Approved Document

Headroom - The clear vertical distance measured from finished floor surface to an overhead obstruction. Circulation space – The defined area in a building that an occupant uses to move from one space to another, such as a hallway, stair way, of an area in a …

  Surfaces

SPECIFICATIONS - hubbellcdn

SPECIFICATIONS - hubbellcdn ... pdf