KLINGERgraphite- laminate PSM laminate PDM

1 KLINGER graphite- laminate PSMO rder example:1 sheetKLINGER graphite- laminate PSM15010, 1,000 x 1,000 x mm. Other delivery options Rings and other finished gaskets arealso available in any size and corresponding sheet and approvals:DIN-DVGW approval no. approval in accor-dance with UVV 28, oxygen (VBG 62) tested up to 130 bar and 200 C, also for use with liquid oxyen. KLINGER graphite- laminate complies with FDA regulations. WRc finish:The KLINGER graphite- laminate PSM is available with KLINGER antistick (A/S) a finish which keeps its sta-bility even at high tempera-tures and causes no organic contaminations of the pure graphite. mm, 2mm, and 3 mm thicksheets are also available with resinimpregnation as an for temperatures up toapprox. 450 an inert atmosphere (no admissionof oxygen) even suitable for higher of application:Particularly suitable under high chemical and thermal PSMkeeps its physical properties in theentire field of application. Resistancetable see for media used in thefood industry.

2 In accordance withLandesgewerbeamt von Baden-W rttemberg and the requirements ofthe German Food function and durability of theKlinger gaskets depends largely onthe installation conditions which weas manufacturers cannot therefore only guarantee a perfectcondition of our structure:A KLINGER graphite foil is rolledon a mm thick tang stainlesssteel sheet ( *) without dataDensity of graphite layerMax. perm. surface load at 450 CCompressibilityASTM F 36 JRecovery ASTM F 36 JStress relaxation DIN 52913:50 MPa, 16 h/300 CKLINGER cold hot compression:Surface load 50 MPaThickness decrease at 23 CThickness decrease at 300 CTightness according to DIN 3535 part 6 Chloride content of graphite layerThicknessSize of sheetsThickneses: mmKLINGER antistick (A/S) on requestPSM 10010ca. 1,030028 3314 19min. ,000/1,0001,500/1,500 PSM 20010ca. 1,016035 4013 18min. ,000/1,0001,500/1,500 PSM 15010ca. 1,018033 3813 18min. ,000/1,0001,500/1,500g/cm3 MPa%%MPa%% diagram for KLINGER graphite- laminate PSM with tang stainless steelsheet reinforcement, thickness mm,initial density g/cm3, several initialthickneses.

3 (Typical values).04080120160 200240 Gasket stress [MPa]20 C300 CThickness [mm] * In case of supply shortfall also be PDMI mportant:Due to the higher compression, theKLINGER graphite- laminate PDM has athickness of mm, even where mm-graphite gaskets were previously used. The final thicknesses are thesame in compressed finish:The KLINGER graphite- laminate PDMis available with KLINGER antistick(A/S) a finish which keeps its stabilityeven at high temperatures and causesno organic contaminations of the puregraphite. handlingDue to of the increase in density wecould do without any new KLINGER graphite- laminate PDM has a purity of 98% andis free of resins, impregnations, orother organic substances and thereforefree of possibly toxic residual stability due to two tang stainless steel sheet reinforcementsDue to the improved connection of thegraphite and the two tang stainlesssteel sheets the new KLINGER-graphite- laminate PDM offers a higherstability and deformation about all unpleasant properties which you know from handling graphite materials.

4 Here are three convincing advantages which are due to the 30% higher density ofthe new KLINGER graphite- laminate PDM:Technical dataCompressibility ASTM F 36 JFinal thickness at a surface load of 35 MPaDensity of the graphite layerGraphite purity Chloride contentTang stainless steel sheets:Tightness according to DIN 3535/6 Stress relaxation DIN 52913 Max. surface load at 300 C Permanent operating temperatureSize of sheetsThicknessOther sizes on requestKLINGER antistick (A/S) on approval no. NG-5124AT041719 98max. * 4501,000 x1, ppmmm CmmmmBetter handling and a much higher more safetyGaskets made of the newKLINGER graphite- laminate PDM offerclearly more safety during fitting andunder of sheets* In case of supply shortfall also may be [MPa]