Transcription of LABORATORY TEST REPORT - Vi-Chem Corporation
1 LABORATORY TEST REPORT COMPOUND: Sevrene 6850-70A COLOR: 9595 Date: 2/17/15 SPECIFICATION: chrysler Design Verification Plan and REPORT Page 1 of 1 DATA REPRESENTS ACTUAL LABORATORY tests Physical Properties Specification Results * Test is outside our scope of accreditation. ** This test was performed by a subcontracted accredited testing LABORATORY . All tests are performed once. ** This test was performed at supplier s biological LABORATORY .
2 This REPORT is not to be reproduced except in full. O:\2015\ Additional information about testing may be found in the accreditation section on our website at Vi-Chem Corporation , 55 Cottage Grove, SW, Grand Rapids, MI 49507 Office (616) 247-8501 or (800) 477-8501, Fax (616) 247-8703 Tensile Strength at Break, 500 mm/min. MPa min. MPa ASTM D412 Elongation %, Die C, 500 mm/min. 225% min. 648% ASTM D412 Tear Strength, Die C, ASTM D624 250 N/cm min.
3 250 N/cm Hardness, Shore A, 15 sec. delay 70 5 70 ASTM 2240 Properties after Heat Aging, 85 C for 168 hrs. Tensile Strength change 10% max. pass Elongation % 200% min. pass Tear Strength change 10% max. pass Hardness after aging within spec 68 pass Odor Test, 85 C Oven, SAE J351 Dry test no objectionable odors pass numerical rating <3 = definite odor but not enough to be offensive Wet test no objectionable odors pass numerical rating <3 = definite odor but not enough to be offensive Fogging Resistance, LP-463DB-12-01 70% min.
4 No visible crystals Crocking, SAE J861 Dry test AATCC min. 4-5 4-5 Wet test AATCC min. 4-5 5-5
