Latex additive to elasticize cement-based adhesives

1 Latex additive to elasticize cement - based adhesivesIsolastic 50is a Latex to be mixed with Kerabond,Kerafloorand Adesilex P10to improve theirperformances and deformability to meet therequirements of class C2 (improved cementitiousadhesive) according to EN 12004 and those of class S1according to EN TO USEISOLASTIC 50 + KERABONDFor interior and exterior bonding of: ceramic tiles of every type (double fired, single fired,gr s, klinker, glass mosaic, porcelain tiles, etc.); stone material and large size of application examples Exterior installation of ceramic tiles and stonematerials (fa ades, swimming pools, balconies,terraces).

2 Ceramic tiles onto precast concrete panels(prefabricated bathrooms, wall in tunnel prefabsystem). Ceramic tiles onto existing floors (ceramic, marble,terrazzo, timber, etc.). Ceramic tiles onto cement based and asphalt basedscreeds. Ceramic tiles onto deformable substrates (gypsum-board cement board, panels, reinforcedconcrete, etc.).ISOLASTIC 50 + KERAFLOORFor interior and exterior bonding of: large-size ceramic tiles; ribbed klinker tiles, cotto toscano, stone slabs layers of adhesive thicker than 5 mm; ceramic tiles on substrates with irregularities up to 15 application examples Ceramic tiles and stone material in exteriors (fa ades,swimming pools, balconies, terraces), also ondeformable substrates.

3 Large-size ceramic floor tiles laid on underfloorheating + ADESILEX P10 For interior and exterior floors and walls bonding of frontand reverse side installation of normal or heavy weightglass, marble and ceramic application examples Bonding mosaic in swimming pools on renders or onsubstrates waterproofed with Mapelastic. Internal bonding of mosaic on non absorbent surfacessuch as existing ceramic tiles, cementitious substrateswaterproofed with Mapegum WP, etc. Bonding glass mosaic on external fa ades ontoconcrete or 50 Isolastic 50[sche1] 116 Inglese - 1 (ISOLASTIC 50) ( - 6 Bozza Corr.)

4 Ciano Digitale/PDF/CD)Isolastic 50 Isolastic 50 Let the mix sit for a few minutes and after afurther stirring, proceed with the the mixApply the mix on the substrates with anotched trowel. Choose the trowel thattransfers the adhesive to at least 65-70% ofthe back of the tiles for walls and floors set tolight foot traffic in interiors and 100%coverage for heavy traffic areas outdoors. Toobtain a good adherence, first apply a thincoat of the mix onto the substrates using theflat side of the trowel, then immediately afterapply the desired thickness of the mix usingthe appropriate notched trowel according tothe type and size of the the tilesThe same recommendation as set for theadhesive with which Isolastic 50is great attention should be paid toopen time which, in the equivalent andrelative temperature and humidity condition,will be slightly shorter than the open time ofthe basic exterior applications, in swimmingpools, reservoirs.

5 Large sizes (over 400 cm2),or floors to be polished in situ, it is advisableto spread a layer of adhesive on the back ofthe tiles as well, so as to ensure perfectcontact and the absence of voids. Always becareful about the formation of the is advisable never to work in temperaturesbelow +5 C or above +40 AND SEALINGWall joints can be grouted after 4-8 hours andfloor joints after 24-36 hours with specialMAPEI cementitious or epoxy grouts,available in different joints must be sealed with thespecial MAPEI TO LIGHT FOOT TRAFFICF loors are set to light foot traffic after 24-36 FOR USES urfaces are ready for use afterapproximately 14 days.

6 Basins and swimmingpools can be filled after 4 can be cleaned using plenty of waterbefore the adhesive begins to set. Aftersetting, cleaning become very difficult, butcan be helped with a solvent such as CONSUMPTION (kg/m2)Isolastic 50 AdhesiveMosaic Trowel n 40,72 Adesilex P10:2 Normal sized tiles (up to 200x200 mm)Trowel n 51 Kerabond:3 Large sized tiles floors, outdoors Trowel n 6> 1,20 Kerafloor:> 4 TECHNICAL CHARACTERISTICSI solastic 50is a very fluid, pinkish-whiteliquid composed of a water dispersion of anextremely elastic polymer which, when mixedwith cement based adhesives , improvesadhesion to all substrates, deformability andimpermeability, once hydration has , Kerafloorand Adesilex P10mixed with Isolasticmust never be used for: installing stone slabs subject to deformationfrom moisture; installing marble or natural stone subject toefflorecenses or staining from moisture.

7 Installing tiles in reservoirs, swimming pools or refrigeration rooms that need to beput in service quickly; installing on metal, rubber, PVC andlinoleum hot and dry climates the adhesive obtainedby mixing Isolastic 50with Kerabond,Keraflooror Adesilex P10, has a short opentime with the formation of a surface skinwhich must be removed by PROCEDUREAll substrates must be flat, sound, cured, freeof loose particles and concrete elements or cast in situmust be cured for at least 3 months infavourable weather substrates must not be subjectto shrinkage once the tiles have beeninstalled.

8 Therefore renders should be curedat least one week per centimetre screeds must have an overallcure of at least 28 days unless they havebeen mades with the special MAPEI binderssuch as Mapecem, Mapecem Pronto,Topcem, Topcem substrates and anhydrite screedsmust be perfectly dry (maximum residualmoisture 0,5%), sound and free from must absolutely be treated with Primer Gor Mapeprim SP. Areas subject to extreme damp must be primed withPrimer ratioKerabond+ Isolastic 50: mix a 25 kg bag ofKerabondwith approx. kg of Isolastic + Isolastic 50: mix a 25 kg bag ofKerafloorwith approx.

9 Kg of Isolastic P10+ Isolastic 50: mix a 25 kg bag of Adesilex P10with approx. kg ofIsolastic the mixPour the powder into Isolastic 50andcontinuously stir the mix with a slow speedmechanical stirrer until it becomes a smoothpaste free of DATA (typical values)In compliance with:-European EN 12004 as C2-European EN 12002 as S1-American ANSI 1999-American ANSI Type 1-Canadian 71 GP 30 M type 2 PRODUCT IDENTITYType:fluid liquidColour:pinkish whiteDensity (g/cm3) :5 7 Dry solids content (%):18 1 Brookfield viscosity (mPa s):30 Storage:24 months in original packing.

10 Protect from frostHazard classification according to 99/45/ using refer to the Safety instructions for the preparation and application paragraph and the information on the packing and Safety Data SheetCustoms class:3906 90 00 COMPOSITION AND PROPERTIES OF THE MIXTURE at +23 C and 50% +Kerafloor +Adesilex P10 +Isolastic 50 Isolastic 50 Isolastic 50 Mixing ratio by weight:10 : 3310 : 3010 : 36 Consistency of mix:very pastyvery pastyvery pastyColour:grey/whitegreywhiteDensity of the mixture (kg/m3) of mix:over 12over 12over 12 Pot life:8 hours8 hours8 hoursApplication temperature range:from +5 C to +40 Cfrom +5 C to +40 Cfrom +5 C to +40 COpen time (according to EN 1346):20-30 minutes20-30 minutes> 30 minutesAdjustability time:approx.