Example: bachelor of science

LEVEL MEASUREMENT for BULK SOLIDS & LIQUIDS

Point LEVEL Continuous Profile Scanning Weight Inventory Control WirelessCUSTOM ENGINEERING & INTEGRATION SOLUTIONSLEVEL MEASUREMENT for bulk SOLIDS & LIQUIDSC ontinuous LEVEL MEASUREMENT for SOLIDS Other products for LEVEL MEASUREMENT and detection of bulk SOLIDS : Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL Sensors Measures SOLIDS , powders, slurries and LIQUIDS Approved for hazardous locations No field calibration or adjustment Trouble free mounting and installation Minimal contact with stored materialThe Bin Master SmartBob II cable displacement (yoyo) sensor is a rugged as well as an economical and compact inventory tracking system that has been designed to measure SOLIDS and powders in silos and tanks. The powerful and robust design of the SmartBob II provides years of maintenance-free service in vessels up to 180 Master Smart Bob II LevelBinMaster 3 DLevelScannerThe BinMaster 3 DLevelScanner uses non-contact, dust-penetrating technology to provide unsurpassed bin volume accuracy.

Continuous Level Measurement for Solids Other products for level measurement and detection of bulk solids: • Dust Detectors • Dry Products Flow / No Flow Detector • …

Tags:

  Liquid, Measurement, Levels, Bulk, Solid, Level measurement for bulk solids amp liquids

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of LEVEL MEASUREMENT for BULK SOLIDS & LIQUIDS

1 Point LEVEL Continuous Profile Scanning Weight Inventory Control WirelessCUSTOM ENGINEERING & INTEGRATION SOLUTIONSLEVEL MEASUREMENT for bulk SOLIDS & LIQUIDSC ontinuous LEVEL MEASUREMENT for SOLIDS Other products for LEVEL MEASUREMENT and detection of bulk SOLIDS : Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL Sensors Measures SOLIDS , powders, slurries and LIQUIDS Approved for hazardous locations No field calibration or adjustment Trouble free mounting and installation Minimal contact with stored materialThe Bin Master SmartBob II cable displacement (yoyo) sensor is a rugged as well as an economical and compact inventory tracking system that has been designed to measure SOLIDS and powders in silos and tanks. The powerful and robust design of the SmartBob II provides years of maintenance-free service in vessels up to 180 Master Smart Bob II LevelBinMaster 3 DLevelScannerThe BinMaster 3 DLevelScanner uses non-contact, dust-penetrating technology to provide unsurpassed bin volume accuracy.

2 Unlike single point devices, it works by measuring multiple points within the bin. Its unique 3D mapping capabilities provide a visual representation of bin contents, detecting cone up or down as well as sidewall build up. Dust-Penetrating Technology: The acoustical-based, low frequency technology is unaffected by dust Multiple Point Accuracy: Taking measurements from multiple points versus a single point takes into account variations that can occur on material surfaces Non-Contact Measurements: Appropriate for foods, chemicals and pharmaceuticals as there is no risk of moving parts coming into contact with bin material 3 dimensional graphic display of silo LEVEL profile True volume reading, even in very large silosAysix Silo Weigh Strain CellsTurn your silo in to a Silo Weigh strain cells are non-intrusive, bolt-on, fully temperature-compensated, reliable, repeatable, accurate and continuous sensors for weight and LEVEL MEASUREMENT in clamp on the outside of a silo leg or beam support and measure the deflection in microns that will vary with the product weight.

3 Complete silo weight/ LEVEL measuring solution Intelligent electronics that provide direct weight or LEVEL MEASUREMENT Easy bolt on installation System accuracy of 2% FS for silo weight MEASUREMENT Perfect alternative to load cells No need to lift silo, bolts directly on the side of the leg of a siloBin Master BMRX Rotary LEVEL SwitchBin Master rotary switches offer a cost effective means to prevent bin overflows. The BMRX and MAXIMA+ feature low power consumption, "de-engergized" operation - which shuts down the motor when material is present - and automatic alerts to power failure. Many configurations, paddles etc. are available to handle most Master Capacitance LEVEL SwitchBin Master Vibrating Probe LEVEL SwitchBin Master provides a variety of vibrating rods to offer side and top-mount flexibility for high, low and mid- LEVEL configurations. They are available in standard, extended length, high temperature and mini models.

4 They may be side or top Particulate MonitorThe BM-30 LX is a particulate monitoring device designed for general process and environmental monitoring of dust particulates for baghouse filter leak detection, process particulate flow monitoring and continuous emissions monitoring. Particulate monitoring helps companies meet regulatory requirements by detecting leaks before emissions are products for LEVEL MEASUREMENT and detection of bulk SOLIDS : Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL SensorsAysix Radartronj Moisture SensorLevel Switches & Accesories for bulk PowdersBin Master PROCAP I & II capacitance probes offer interference-free, fail-safe operation & "Quick-Set" calibration. These capacitance sensors are used for high and low LEVEL detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing.

5 Many probe configurations, materials and lengths are available to handle most RadarTron accuratly measures the moisture content of fine aggregates such as sand and crushed stone. RadarTrons microwave technology eleim inates the errors associated with resistance and capacitance technolgies guaranteeing an accurate reading everytime. It is easily installed in any Bin wall and is suitable for digital display or interface with a Micro TREK guided microwave LEVEL transmitter is designed for continuous MEASUREMENT of conductive and non conductive LIQUIDS , pulps and SOLIDS . The Micro TREK LEVEL gauge operates on the well known TDR (Time Domain Reflectrometry) principle. Typical applications will include cement, limestone, fly ash, alumina, carbon black, mineral powders, free flowing TDR Guided Wave Radar Universal device that can measure LEVEL of LIQUIDS , pastes, granulates, powders, and liquid interface Easy to install: onsite calibration is not needed Optional second current output - used for displaying interface measurements.

6 Measuring range up to 24 meters. The Bin Master SmartBob II cable displacement (yoyo) sensor is a rugged as well as an economical and compact inventory tracking system that has been designed to measure SOLIDS and powders in silos and tanks. The powerful and robust design of the SmartBob II provides years of maintenance-free service in vessels up to 180 feet. Measures SOLIDS , powders, slurries and LIQUIDS Approved for hazardous locations No field calibration or adjustment Trouble free mounting and installation Minimal contact with stored materialOther products for LEVEL MEASUREMENT and detection of bulk SOLIDS : Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL SensorsNivelco Non Contact RadarThe Nivelco 24 GHz (K-band) PiloTREK Pulse Radar gauges are regarded the most progressive non-contact LEVEL transmitters of the industrial process automation field.

7 Their accuracies are excellent and their short and narrow antennas make their installation simple and low cost. NIVELCO s new K-band radar featuring 3 mm ( inch) accuracy and short dead band excels with its versatile housing concept lining up plastic, aluminium and stainless steel ultrasonic transmitters offer the best in liquid LEVEL MEASUREMENT in a compact simple package. Developed using the established SenSonic range of narrow beam angle pulse echo transducers, EchoTREK units are available with MEASUREMENT ranges up to 25 meters - with standard plastic, PTFE or stainless steel sensor faces. Installed on the tank roof, or above the liquid LEVEL surface to be measured, the transmitter gives an analogue output proportional to liquid LEVEL . 2-wire K-band Pulse Burst Radar 23 metre (75 feet) measuring range for LIQUIDS and slurries Easy installation due to small antennas System accuracy of 3 mm ( inch) accuracy Horn and enclosed antenna types High temperature version Non-contact LEVEL metering-wire 2- or 4-wire compact transmitter Easy installation due to small antennas Narrow 5 beam angle PP, PVDF, PTFE, stainless steel or foam faced transducers Optional switching relay Nivelco Non Contact Compact Ultrasonic SensorsNivelco Non Contact Integrated Ultrasonic SensorContinuous "Non Contact" LEVEL MEASUREMENT for LIQUIDS Other products for LEVEL MEASUREMENT and detection of bulk SOLIDS .

8 Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL SensorsContinuous "Contact" LEVEL MEASUREMENT for LiquidsNivelco MagnetorestrictiveNIVOTRACK magnetostrictive transmitters are an ideal solution for high accuracy MEASUREMENT of clean fluids. Its high precision renders the NIVOTRACK suitable for custody transfer MEASUREMENT of LIQUIDS such as fuels, solvents, alcohol derivatives Hydrostatic Pressure SensorsNIVOPRESS DT series is a 2-wire microprocessor controlled pressure and LEVEL gauge. The loop powered transmitter can be converted into indicator by the use of theplug in display module. The unit measures the hydrostatic pressure and for LEVEL gauging it compares the water head with the actual atmospheric piezoresistive sensor is protected by a flush diaphragm with silicon oil between the two for pressure transfer.

9 Mm or 1 mm resolution Rigid or flexible guide tube Insertion length maximum 15 m Plastic coated version for chemicals 4-20 mA and HART output 99 point linearization table Custody transfer measurementNivelco Hydrostatic Bore Hole Pressure SensorThe Nivopress N hydrostatic LEVEL transmitters are designed to measure the LEVEL of clean or contaminated LIQUIDS . The pressure sensor at the bottom of the probe measures the sum of the hydrostatic pressure (Phydr) of the liquid column above it and the atmospheric pressure (Patm). The atmospheric pressure is led to the sensor through a breathing capillary which is equipped with a moisture filter that prevents the moisture reaching and damaging the electronics. This enables the atmospheric pressure to be subtracted from the measured pressure to get the hydrostaticpressure which is proportional to the height of the liquid column (h).

10 Non-contact LEVEL metering-wire 2- wire compact transmitter Measuring range: psig, psig Scalable analogue output Wide variety of process connection High accuracy < Measuring range up to 200m Two- or three-wire submersible transmitter Stainless steel body Clean or contaminated water, sewage Weak acids, caustics Other products for LEVEL MEASUREMENT and detection of bulk SOLIDS : Dust Detectors Dry Products Flow / No Flow Detector Tilt Switches Aeration and Airbrator Nozzles Pressure and Diaphragm LEVEL Switches Ultrasonic LEVEL Sensors Non-contact LEVEL metering-wire 2- or 4-wire compact transmitter Easy installation due to small antennas Narrow 5 beam angle PP, PVDF, PTFE, stainless steel or foam faced transducers Optional switching relay Continuous "Contact" LEVEL MEASUREMENT for LiquidsCapacitance LEVEL TransmitterCapacitive LEVEL transmitters provide an ideal solution for LEVEL MEASUREMENT of conductive or non-conductive LIQUIDS .


Related search queries