Lightweight, self-locking and extremely strong

1 | SeriesSmall, thinwall, lightweight, < strong >self-lockingstrong > and < strong >extremelystrong > strong . An Aerospacequality nut which is useful when space and weight are at a - T hin walled nut, takes less spaceVery high resistance to looseningVery high mechanical resistance 1100 MPAVery high locking torque (according to aerospace standards)Consistency of performance - Almost no locking torque scatterFlanged Ideal for thin sheet materialTemperature & Corrosion resistance Operating temperature range between -40oC and 480oC manufactured in CRES A286 Stainless Steel silver platedRe-usability can be fastened and unfastened a minimum of 15 times without compromising minimum required performance Lightweight, < strong >self-lockingstrong > and < strong >extremelystrong > strongPopular Applications: EngineDiameters:M3-M12 Materials:CRES A286 Stainless SteelStandard Coating:Silver | Fastening Systems St Cosme Operations, 9 rue de Cressonnieres 72110 Saint Cosme en Varais, France Tel: +33 (0) Fax: +33 (0) RegisteredFM 500602 ISO 9001:2000TS 507118-000 ISO/TS 16949:2002FM 500661EN 9100:2003FM 50061AS 9100 Rev.

2 BEMS 500663 ISO 14001:2004 All dimensions are in mm unless stated. AWCM arking B DSVH0o-50o90o-120o1,0 Deformationfor self-lockingactionSimmonds Part NumberThreadABCDHSVWMass Weight Approx3050 PH 105MJ3 x 0,5 - 4H6H65,34,23,83,231,20,440,0284070 PH 105MJ4 x 0,7 - 4H6H7,46,75,34,84,241,50,550,0505080 PH 105MJ5 x 0,8 - 4H6H9,18,36,55,85,2520,66h120,0806100 PH 105MJ6 x 1,0 - 4H5H10,69,87,67,16,35,42,30,770,1157100 PH 105MJ7 x 1,0 - 4H5H12,111,38,78,17,36,32,70,880,1708100 PH 105MJ8 x 1,0 - 4H5H13,612,810,99,18,37,23,20,9100,31510 125 PH 105MJ10 x 1,25 - 4H5H16,815,813,211,110,393,81,112h130,47 512125 PH 105MJ12 x 1,25 - 4H5H19,918,815,513,112,310,84,51,4141,00 Material:Corrosion resistant steel Z6 NCT25 in accordance with TR 3791, heat treated for 27 Treatment:Silver plated 5 m minimum in accordance with EN :1100 MPa (at ambient temperature) /425 :MJ in accordance with ISO of Form and Position:In accordance with ISO : 3 and 4 mm: MJ-SD in accordance with EN 2424-Category N, +letter C on the area indicated on the drawing.

3 5mm: EN 3196-SD in accordance with EN 2424-Category C, + letter C on the area indicated on the & Acceptance Conditions:EN ,36,3Ra max( )Remove sharp edges 0,1 0,4