Transcription of LUBCON® High Performance H1 Food Grade …
1 LUBCON High Performance H1 food Grade lubricants Base Oil Vis- Temperature Application Products Base Oil/Thickener Features & Benefits cosity at 40 C Range Bearings/Guides Turmosynthgrease AL 4602 Highly refined white oil/ 460 mm2/s -25 C up to +140 C Resistant to hot/cold water, good adhesive properties and outstanding protection against corrosion. Multipurpose Grease Turmosynthgrease AL 2502 al-complex soap 250 mm2/s -20 C up to +120 C Excellent Performance for applications with low/medium temperatures and speeds. Turmosynthgrease ALN 4602 460 mm2/s -30 C up to +180 C.
2 High Performance PAO/polyurea al-special High Performance for demanding application conditions (high speed, high load, high temperature). Turmosynthgrease ALN 2502 PM 250 mm2/s -30 C up to +160 C. Synthetic Grease soap Very oxidation stable in corrosive environment. High water washout resistance. Long service intervals. Turmosynthgrease ALN 1002 100 mm2/s -40 C up to +140 C. PAO/polyurea al-special Low temperature grease, suitable down to -54 C, with good wear protection, high load factor, high Low Temperature Grease Turmosynthgrease LT 300 28 mm2/s -54 C up to +120 C.
3 Soap metal affinity and long service life. Extreme Temperature 2 Extreme high temperature grease with excellent ageing and oxidation stability. Non-flammable and Turmotemp II/400 CL 2 PFPE/PTFE 500 mm /s -30 C up to +260 C. Grease neutral to most elastomers. Gears PAO/polyurea al-special 2. Turmosynthgrease ALN 4602 460 mm /s -30 C up to +180 C. Open Gear Grease soap. Optional with PTFE 2 Good adhesive properties with high load carrying capacity. Turmosynthgrease ALN 4602 TF 460 mm /s -30 C up to +180 C. (TF version). Turmosynthgrease ALN 1001/00 PAO/polyurea al-special Excellent wear protection.
4 Wide temperature range and long service life. Good alternative to gear oils Semifluid Gear Grease 100 mm2/s -40 C up to +150 C. (also available in higher ISO VG) soap in applications where leakage is a risk. White oil blended with 2. Multipurpose Gear Oil Turmosynth VG Series 68 - 1500 mm /s -10 C up to +100 C Multipurpose gear and lubricating oil. Highly effective additive package for superior Performance . synthetic oils High Performance Turmosynthoil GV Series PAO 15 - 1000 mm2/s -40 C up to +140 C Fully synthetic gear oil with wide temperature range and long service life.
5 Synthetic Gear Oil Worm, Bevel Gear 2 Very good wear protection against sliding friction in worm and bevel gears. Suitable for high Turmosynthoil PG Series Polyglycol 68 - 680 mm /s -30 C up to +160 C. and Geared Motor Oil temperatures and extended service intervals. Hydraulic Systems White oil blended with 2. Multipurpose Hydraulic Oil Turmosynth VG Series 10 - 1500 mm /s -10 C up to +100 C Highly effective additive package ensures safe operation in hydraulic systems. synthetic oils High Performance 2. Turmosynthoil GV Series PAO 15 - 150 mm /s -40 C up to +140 C Fully synthetic hydraulic oil with wide temperature range and long service life.
6 Synthetic Hydraulic Oil Chains Multipurpose Universal chain oil with excellent penetration properties. Leaves dry lubricant film that reduces dust Turmofluid LMI 300 Synthetic ester 15 mm2/s -10 C up to +160 C. Chain Spray attraction. Adhesive PTFE Very adhesive with solid lubricants to protect against wear and corrosion under extreme conditions Turmosynthoil 75 TF Synthetic ester/PTFE 40 mm2/s -15 C up to +200 C. Chain Spray such as frequent wash downs. High Viscosity White oil blended with Clear, highly adhesive chain oil with high load carrying capacity.
7 Also suitable for lubrication of open Turmosynth VG 4800 4800 mm2/s -5 C up to +150 C. Chain Spray synthetic oils gears. Low Temperatures 2 Developed for use on chains in spiral freezers. Penetrates into the structure of the chain and protects it Turmosynthoil GV 32 PAO 32 mm /s -55 C up to +140 C. Chain Oil at lowest temperatures. High Temperature High temperature, solid free oven chain oil with newly developed combination of anti-oxidation Turmosynthoil HTC Series Advanced synthetic ester 70 - 320 mm2/s up to +250 C. Chain Oil additives. Very low evaporation loss.
8 Extreme Temperature Polyglycol combined with 2 At temperatures above +220 C the oil evaporates and a smooth dry film with lubricating properties up Turmosynthoil PG 120 WG 120 mm /s up to +900 C. Chain Oil white solid lubricants to +900 C is formed. Compressors Rotary Screw 2. Compguard FG 32 - 68 SHC 32 - 68 mm /s up to +160 C. Compressors Fully synthetic compressor oils for extended oil change interval of more than 4,000 hours. Reduce Reciprocating Piston 2 friction and operating temperature. Compguard FG 100 SHC mm /s up to +160 C. Compressors Vacuum Pumps.
9 Rotary Vane Pumps Compguard VPO 100 PAO mm2/s -30 C up to +140 C Fully synthetic high Performance vacuum oil for extended oil change intervals. Maintenance . Silicone Spray Turmsilon M 100 Silicone oil 270 mm2/s -50 C up to +220 C Release and sliding agent, neutral in colour, odour and taste. Quickly evaporating special cleaner and degreaser particularly suitable to remove oil, grease or wax Degreaser Turmosynth VG 1 (Aerosol) Isoparaffinic HC - Room Temperature from tools and components. Cleaner Turmosynth VG 2 (Aerosol) Isoparaffinic HC - -30 C up to + 60 C Multi-purpose cleaner with lubricating properties.
10 Multi-purpose synthetic penetrating oil, which deeply penetrates, cleans and loosens rusted parts and Penetrating Oil Rapid FG 15 (Aerosol) PAO 15 mm2/s -55 C up to + 100 C. leaves a durable lubricating film. Assembly Pastes Threads, Bolts, Hinges Turmosynth TAS white White oil combined with Metal-free sliding agent/assembly paste with excellent separating properties at high contact pressure 80 mm2/s -20 C up to + 900 C. Guides (also available as aerosol) solids/al-complex and high temperatures. Very good fretting corrosion protection. Excellent lubricity.