LUBCON® High Performance H1 Food Grade Lubricants

1 LUBCON High Performance H1 food Grade Lubricants Base Oil Vis- Temperature Application Products Base Oil/Thickener Features & Benefits cosity at 40 C Range Bearings/Guides Turmosynthgrease AL 4602 Highly refined white oil/ 460 mm2/s -25 C up to +140 C Resistant to hot/cold water, good adhesive properties and outstanding protection against corrosion. Multipurpose Grease Turmosynthgrease AL 2502 al-complex soap 250 mm2/s -20 C up to +120 C Excellent Performance for applications with low/medium temperatures and speeds. Turmosynthgrease ALN 4602 460 mm2/s -30 C up to +180 C. High Performance PAO/polyurea al-special High Performance for demanding application conditions (high speed, high load, high temperature).

2 Turmosynthgrease ALN 2502 PM 250 mm2/s -30 C up to +160 C. Synthetic Grease soap Very oxidation stable in corrosive environment. High water washout resistance. Long service intervals. Turmosynthgrease ALN 1002 100 mm2/s -40 C up to +140 C. PAO/polyurea al-special Low temperature grease, suitable down to -54 C, with good wear protection, high load factor, high Low Temperature Grease Turmosynthgrease LT 300 28 mm2/s -54 C up to +120 C. soap metal affinity and long service life. Extreme Temperature 2 Extreme high temperature grease with excellent ageing and oxidation stability. Non-flammable and Turmotemp II/400 CL 2 PFPE/PTFE 500 mm /s -30 C up to +260 C.

3 Grease neutral to most elastomers. Gears PAO/polyurea al-special 2. Turmosynthgrease ALN 4602 460 mm /s -30 C up to +180 C. Open Gear Grease soap. Optional with PTFE 2 Good adhesive properties with high load carrying capacity. Turmosynthgrease ALN 4602 TF 460 mm /s -30 C up to +180 C. (TF version). Turmosynthgrease ALN 1001/00 PAO/polyurea al-special Excellent wear protection. Wide temperature range and long service life. Good alternative to gear oils Semifluid Gear Grease 100 mm2/s -40 C up to +150 C. (also available in higher ISO VG) soap in applications where leakage is a risk. White oil blended with 2.

4 Multipurpose Gear Oil Turmosynth VG Series 68 - 1500 mm /s -10 C up to +100 C Multipurpose gear and lubricating oil. Highly effective additive package for superior Performance . synthetic oils High Performance Turmosynthoil GV Series PAO 15 - 1000 mm2/s -40 C up to +140 C Fully synthetic gear oil with wide temperature range and long service life. Synthetic Gear Oil Worm, Bevel Gear 2 Very good wear protection against sliding friction in worm and bevel gears. Suitable for high Turmosynthoil PG Series Polyglycol 68 - 680 mm /s -30 C up to +160 C. and Geared Motor Oil temperatures and extended service intervals.

5 Hydraulic Systems White oil blended with 2. Multipurpose Hydraulic Oil Turmosynth VG Series 10 - 1500 mm /s -10 C up to +100 C Highly effective additive package ensures safe operation in hydraulic systems. synthetic oils High Performance 2. Turmosynthoil GV Series PAO 15 - 150 mm /s -40 C up to +140 C Fully synthetic hydraulic oil with wide temperature range and long service life. Synthetic Hydraulic Oil Chains Multipurpose Universal chain oil with excellent penetration properties. Leaves dry lubricant film that reduces dust Turmofluid LMI 300 Synthetic ester 15 mm2/s -10 C up to +160 C. Chain Spray attraction.

6 Adhesive PTFE Very adhesive with solid Lubricants to protect against wear and corrosion under extreme conditions Turmosynthoil 75 TF Synthetic ester/PTFE 40 mm2/s -15 C up to +200 C. Chain Spray such as frequent wash downs. High Viscosity White oil blended with Clear, highly adhesive chain oil with high load carrying capacity. Also suitable for lubrication of open Turmosynth VG 4800 4800 mm2/s -5 C up to +150 C. Chain Spray synthetic oils gears. Low Temperatures 2 Developed for use on chains in spiral freezers. Penetrates into the structure of the chain and protects it Turmosynthoil GV 32 PAO 32 mm /s -55 C up to +140 C.

7 Chain Oil at lowest temperatures. High Temperature High temperature, solid free oven chain oil with newly developed combination of anti-oxidation Turmosynthoil HTC Series Advanced synthetic ester 70 - 320 mm2/s up to +250 C. Chain Oil additives. Very low evaporation loss. Extreme Temperature Polyglycol combined with 2 At temperatures above +220 C the oil evaporates and a smooth dry film with lubricating properties up Turmosynthoil PG 120 WG 120 mm /s up to +900 C. Chain Oil white solid Lubricants to +900 C is formed. Compressors Rotary Screw 2. Compguard FG 32 - 68 SHC 32 - 68 mm /s up to +160 C. Compressors Fully synthetic compressor oils for extended oil change interval of more than 4,000 hours.

8 Reduce Reciprocating Piston 2 friction and operating temperature. Compguard FG 100 SHC mm /s up to +160 C. Compressors Vacuum Pumps . Rotary Vane Pumps Compguard VPO 100 PAO mm2/s -30 C up to +140 C Fully synthetic high Performance vacuum oil for extended oil change intervals. Maintenance . Silicone Spray Turmsilon M 100 Silicone oil 270 mm2/s -50 C up to +220 C Release and sliding agent, neutral in colour, odour and taste. Quickly evaporating special cleaner and degreaser particularly suitable to remove oil, grease or wax Degreaser Turmosynth VG 1 (Aerosol) Isoparaffinic HC - Room Temperature from tools and components.

9 Cleaner Turmosynth VG 2 (Aerosol) Isoparaffinic HC - -30 C up to + 60 C Multi-purpose cleaner with lubricating properties. Multi-purpose synthetic penetrating oil, which deeply penetrates, cleans and loosens rusted parts and Penetrating Oil Rapid FG 15 (Aerosol) PAO 15 mm2/s -55 C up to + 100 C. leaves a durable lubricating film. Assembly Pastes Threads, Bolts, Hinges Turmosynth TAS white White oil combined with Metal-free sliding agent/assembly paste with excellent separating properties at high contact pressure 80 mm2/s -20 C up to + 900 C. Guides (also available as aerosol) solids/al-complex and high temperatures.

10 Very good fretting corrosion protection. Excellent lubricity. Sugar-Dissolving Fluid Biodegradable sugar- Sugar-dissolving lubricant with excellent corrosion protection. Easily cleans sticky deposits and has Elephants milk White oil 22 mm2/s +10 C up to +65 C. dissolvent lubricating properties. Converting machines to H1 food Grade Lubricants It is highly recommended to flush gearboxes and hydraulic system ( with LUBCON Turmoflush FG 15) when converting from conventional oil to H1 registered Lubricants in order to achieve adequate cleanliness and full Performance of the new lubricant. Detailed instructions for oil and grease change procedures can be obtained from your LUBCON Distributor or your regional LUBCON Representative.