Manual Call Forwarding - Mitel

1 call FeaturesPage 32 Mitel Model 5212/5224 User Guide Issue 2, October 2008 Manual call ForwardingThe following table describes Manual call Forwarding options. To use Manual call Forwarding :1. Press the Fwd button, or dial the Manual call Forwarding feature code from the table above. ENTER FORWARD DEST Enter the extension number, or press the Outgoing button and then dial the telephone number. FWD ALL CALLS TO <number> cancel a Manual call Forwarding request:Do one of the following: Press the Fwd button, and then press (Speaker), or lift and replace the handset.

2 ANY call FORWARD CANCELED appears. System ForwardingYou can use System Forwarding to route calls based on the type of call and the idle or busy status of your endpoint. You cannot program the System Forward destination. You can only turn it on or off. Contact your system administrator for more turn on or turn off System Forwarding :Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354 again to turn System Forwarding off. call Forward FeatureDescriptionCodeCall Forward All CallsAll incoming calls are call Forward All CallsAll incoming calls are call Forward if no AnswerAll incoming calls are forwarded if not answered.

3 (The timer is set by the system administrator.)356 call Forward If BusyWhen your endpoint is busy, all incoming calls are forwarded without Forward If No Answer/BusyAll incoming calls are forwarded if your endpoint is busy, or if you do not