MATERIAL SAFETY DATA SHEET 1 Lacquer Thinner

1 1 Page: Lacquer ThinnerMATERIAL SAFETY data SHEET230 SpecialHealthFlammabilityInstability08/2 0/200705/21/200904/09/2009 Date Created:Revision:Supercedes Revision:05/21/2009 Printed:1. Product and Company IdentificationProduct Name: Lacquer ThinnerManufacturer Information Company Name:W. M. Barr2105 Channel AvenueMemphis, TN 38113 Phone Number:(901)775-0100 Emergency Contact:3E 24 Hour Emergency Contact (800)451-8346 Barr Customer Service (800)398-3892 Web site Barr EHS Dept (901)775-0100 Intended Use:Paint thinning and general paint clean , QML170, CML170, QML170 LSynonyms2.

2 Hazards IdentificationDanger! Extremely flammable. Keep away from heat, sparks, flame and all other sources of ignition. Vaporsmay cause flash fire or ignite explosively. Do not smoke. Extinguish all flames and pilot lights, and turn offstoves, heaters, electric motors and all other sources of ignition during use and until all vapors are gone. Bewareof static electricity that may be generated by clothing and other OverviewThis MATERIAL is classified as hazardous under OSHA Regulatory Status:Inhalation Acute Exposure Effects:Vapor harmful. May cause dizziness; headache; watering of eyes; irritation of respiratory tract; weakness;drowsiness; nausea; numbness in fingers, arms and legs; depression of central nervous system; loss of appetite;fatigue; hallucinations; light headedness; visual disturbances; giddiness and intoxication; sleepiness; cough anddyspnea; cold, clammy extremities; diarrhea; vomiting; dilation of pupils; spotted vision.

3 Severe overexposuremay cause convulsions; unconsciousness; coma; and death. Intentional misuse of this product by deliberatelyconcentrating and inhaling can be harmful or Contact Acute Exposure Effects:May be absorbed through the skin. May cause irritation; numbness in the fingers and arms; drying of skin; anddermatitis. May cause increased severity of symptoms listed under Contact Acute Exposure Effects:This MATERIAL is an eye irritant. May cause irritation; burns; conjunctivitis of eyes; and corneal ulcerations of theeye. Vapors may irritate Acute Exposure Effects:Poison. Cannot be made non-poisonous.

4 May be fatal or cause blindness. May cause dizziness; headache;nausea; vomiting; burning sensation in mouth, throat, and stomach; loss of coordination; depression of the centralnervous system; narcosis; stupor; gastrointestinal irritation; liver, kidney, and heart damage; diarrhea; loss ofHealth Hazards (Acute and Chronic)Licensed to Barr and CompanyGHS format05/21/2009 Revision:05/21/2009 Printed: 2 Page: Lacquer ThinnerMATERIAL SAFETY data SHEET04/09/2009 Supercedes Revision:appetite; coma and death. May produce symptoms listed under Exposure Effects:Reports have associated repeated and prolonged overexposure to solvents with neurological and otherphysiological damage.

5 Prolonged or repeated contact may cause dermatitis. Prolonged skin contact may result inabsorption of a harmful amount of this MATERIAL . May cause conjunctivitis; gastric disturbances; insomnia;dizziness; headache; weakness; fatigue; nausea; heart palpitations; skin irritation; numbness in hands and feet;permanent central nervous system changes; some loss of memory; pancreatic damage; giddiness; visualimpairment or blindness; kidney or liver damage; and death. May cause symptoms listed under Organs: Central Nervous System, Liver, Kidney, Heart, Stomach, Respiratory SystemPrimary Routes of Entry: Inhalation, Ingestion, Skin AbsorptionSee Potential Health and Symptoms Of ExposureDiseases of the skin, eyes, liver, kidneys, central nervous system and respiratory Conditions Generally Aggravated By Exposure3.

6 Composition/Information on IngredientsHazardous Components (Chemical Name)Methanol {Methyl alcohol; Carbinol; Woodalcohol}67-56-1 CAS # %Concentration {Benzene, Methyl-; Toluol}108-88-3 % % ethyl ketone {MEK; 2-Butanone}78-93-3 % , 2-Butoxy- {Ethylene glycol n-butylether, (a glycol ether)}111-76-2 % acid, Ethyl ester {Ethyl acetate}141-78-6 % , Light aliphatic naptha {Light aliphaticsolvent naphtha (petroleum)}64742-89-8 % First Aid MeasuresInhalation:If user experiences breathing difficulty, move to air free of vapors, Administer oxygen or artificial medicalassistance can be Contact:Wash with soap and large quantities of water and seek medical attention if irritation from contact Contact.

7 Flush with large quantities of water for at least 15 minutes and seek immediate medical :Call your local poison control center, hospital emergency room or physician immediately for instructions toinduce and First Aid ProceduresPoison. This product contains methanol. Methanol is metabolized to formaldehyde and formic acid. Thesemetabolites may cause metabolic acidosis, visual disturbances and blindness. Since metabolism is required forthese toxic symptoms, their onset may be delayed from 6 to 30 hours following ingestion. Ethanol competes forthe same metabolic pathway and has been used as an antidote.

8 Methanol is effectively removed by your local poison control center for further to PhysicianLicensed to Barr and CompanyGHS format05/21/2009 Revision:05/21/2009 Printed: 3 Page: Lacquer ThinnerMATERIAL SAFETY data SHEET04/09/2009 Supercedes Revision:5. Fire Fighting MeasuresFlammability Classification:NFPA Class IBFlash Pt:< F Method Used: Setaflash Closed Cup (Rapid Setaflash)Explosive Limits:LEL: No data . UEL: No respiratory protection should be provided for fire fighters fighting fires in buildings or confinedareas. Storage containers exposed to fire should be kept cool with water spray to prevent pressure build-up.

9 Stayaway from heads of containers that have been exposed to intense heat or Fire Fighting ProceduresNo data Fire and Explosion HazardsCarbon monoxide and carbon Combustion ProductsUse carbon dioxide, dry powder, or Extinguishing MediaNo data Extinguishing Media6. Accidental Release MeasuresClean up:Keep unnecessary people away; isolate hazard area and deny entry. Stay upwind, out of low areas, and ventilateclosed spaces before entering. Shut off ignition sources; keep flares, smoking or flames out of hazard spills:Take up with sand, earth or other noncombustible absorbent MATERIAL and place in a plastic container spills:Dike far ahead of spill for later To Be Taken In Case MATERIAL Is Released Or Spilled7.

10 Handling and StorageRead carefully all cautions and directions on product label before use. Since empty container retains residue,follow all label warnings even after container is empty. Dispose of empty container according to all not reuse this not use in small enclosed spaces, such as basements and bathrooms. Vapors can accumulate and explode To Be Taken in HandlingKeep container tightly closed when not in use. Store in a cool, dry place. Do not store near flames or at To Be Taken in StoringLicensed to Barr and CompanyGHS format05/21/2009 Revision:05/21/2009 Printed: 4 Page: Lacquer ThinnerMATERIAL SAFETY data SHEET04/09/2009 Supercedes Revision:8.