Example: quiz answers

MATERIAL SAFETY DATA SHEET ANSULITE 3% …

MATERIAL SAFETY data SHEETANSULITE 3% AFFF (AFC-3-A)Product Code: 1010-2-016 ANaIssue Date: 08-30-20101. Product and Company IdentificationMaterial nameANSULITE 3% AFFF (AFC-3-A)Version #01 Revision date08-30-2010 CAS #MixtureProduct Code1010-2-016 ANaProduct useFire extinguishing agentCHEMTREC 800-424-9300 or 703-527-3887 , WI 54143-2542 One Stanton StreetTyco Fire Suppression and Building ProductsEmergency Phone NumberInternetPhoneAddressName SupplierManufacturer / Importer /715-735-74112. Hazards IdentificationEmergency overviewWARNING! Causes skin and eye regulatory statusThis product is considered hazardous under 29 CFR (Hazard Communication).Potential health effectsRoutes of exposureEye contact. Skin contact. Inhalation. not get this MATERIAL in contact with contact with the skin.

MATERIAL SAFETY DATA SHEET ANSULITE 3% AFFF (AFC-3-A) Product Code: 1010-2-016 ANa Issue Date: 08-30-2010 1. Product and Company Identification Material name ANSULITE 3% AFFF (AFC-3-A)

Tags:

  Sheet, Data, Safety, Material, Material safety data sheet ansulite, Ansulite

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of MATERIAL SAFETY DATA SHEET ANSULITE 3% …

1 MATERIAL SAFETY data SHEETANSULITE 3% AFFF (AFC-3-A)Product Code: 1010-2-016 ANaIssue Date: 08-30-20101. Product and Company IdentificationMaterial nameANSULITE 3% AFFF (AFC-3-A)Version #01 Revision date08-30-2010 CAS #MixtureProduct Code1010-2-016 ANaProduct useFire extinguishing agentCHEMTREC 800-424-9300 or 703-527-3887 , WI 54143-2542 One Stanton StreetTyco Fire Suppression and Building ProductsEmergency Phone NumberInternetPhoneAddressName SupplierManufacturer / Importer /715-735-74112. Hazards IdentificationEmergency overviewWARNING! Causes skin and eye regulatory statusThis product is considered hazardous under 29 CFR (Hazard Communication).Potential health effectsRoutes of exposureEye contact. Skin contact. Inhalation. not get this MATERIAL in contact with contact with the skin.

2 Frequent or prolonged contact may defat and dry the skin, leading todiscomfort and not breathe vapor. May be a likely route of entry. Do not organsEyes. RESPIRATORY SYSTEM. Skin. Central nervous effectsFrequent or prolonged contact may defat and dry the skin, leading to discomfort and and symptomsIrritation of nose and throat. Irritation of eyes and mucous membranes. Defatting of the Skin #Percent3. Composition / Information on - 10 Butyl Carbitol> 90 Other components below reportable levels4. First Aid MeasuresFirst aid proceduresEye contactImmediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. Get medical attention if irritation persists after contactWash off with warm water and soap.

3 Get medical attention if irritation develops and to fresh air. For breathing difficulties, oxygen may be necessary. Get medical attention, mouth. Do not induce vomiting without advice from poison control center. IF SWALLOWED:Immediately call a POISON CENTER or doctor/physician. If vomiting occurs, keep head low sothat stomach content doesn't get into the to physicianSymptoms may be name: ANSULITE 3% AFFF (AFC-3-A)1521 Version #: 01 Revision date: 08-30-2010 F-9743 MSDS US1 / 5 General adviceIf you feel unwell, seek medical advice (show the label where possible). Ensure that medicalpersonnel are aware of the MATERIAL (s) involved, and take precautions to protect this SAFETY data SHEET to the doctor in Fire Fighting MeasuresFlammable propertiesNo unusual fire or explosion hazards mediaSuitable extinguishingmediaThis product is not flammable.

4 Use extinguishing agent suitable for type of surrounding of firefightersSpecific hazards arisingfrom the chemicalNone methodsNone combustionproductsMay include oxides of Accidental Release MeasuresPersonal precautionsLocal authorities should be advised if significant spillages cannot be contained. Surfaces maybecome slippery after precautionsPrevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses oronto the for containmentStop the flow of MATERIAL , if this is without risk. Dike the spilled MATERIAL , where this is entry into waterways, sewer, basements or confined for cleaning upShould not be released into the Spills: Dike far ahead of spill for later disposal. Use a non-combustible MATERIAL likevermiculite, sand or earth to soak up the product and place into a container for later Spills: Wipe up with absorbent MATERIAL ( cloth, fleece).

5 Never return spills in original containers for re-use. Following product recovery, flush area withwater. Clean surface thoroughly to remove residual Handling and StorageHandlingDo not get this MATERIAL in contact with eyes. Avoid contact with skin. Avoid prolonged and open container with in cool place. Store in a well-ventilated place. Keep container tightly closed. Keep out of thereach of children. Use care in Exposure Controls / Personal ProtectionPersonal protective equipmentEye / face protectionDo not get in eyes. Wear approved chemical SAFETY glasses or goggles where eye exposure isreasonably protectionWear appropriate chemical resistant clothing. Chemical resistant protectionWhen workers are facing concentrations above the exposure limit they must use appropriatecertified hygieneconsiderationsHandle in accordance with good industrial hygiene and SAFETY practice.

6 When using, do not eat,drink or smoke. Avoid contact with Physical & Chemical yellow. - pointNot pointNot F (97 C) MATERIAL name: ANSULITE 3% AFFF (AFC-3-A)1521 Version #: 01 Revision date: 08-30-2010 F-9743 MSDS US2 / 5 Flash point> 212 F (> 100 C)Evaporation rateNot limits in air, upper,% by volumeNot limits in air, lower,% by volumeNot pressureNot densityNot densityNot (water)Not coefficient(n-octanol/water)Not availableAuto-ignition temperatureNot temperatureNot Chemical Stability & Reactivity InformationChemical stabilityMaterial is stable under normal to avoidNone materialsAlkaline metals. Strong acids, alkalies and oxidizing decompositionproductsNitrogen oxides (NOx). Sulfur oxides. Carbon Toxicological InformationToxicological informationThe toxicity of this product has not been dataComponentsTest ResultsAcute Dermal LD50 Rabbit: 2700 mg/kgButyl Carbitol (112-34-5)Acute Oral LD50 Guinea pig: 2000 mg/kgAcute Oral LD50 Rabbit: 2200 mg/kgAcute Oral LD50 Rat: 6560 mg/kgAcute Other LD50 Mouse: 850 mg/kgAcute Other LD50 Rat: 500 mg/kgLocal effectsComponents of the product may be absorbed into the body through the skin.

7 Contact may irritateor burn product is not considered to be a carcinogen by IARC, ACGIH, NTP, or data12. Ecological InformationComponentsTest ResultsEC50 Algae: > 100 mg/l HoursButyl Carbitol (112-34-5)EC50 Water flea (Daphnia magna): 3184 mg/l hoursLC50 Bluegill (Lepomis macrochirus): 1300 mg/l hoursEcotoxicityNot expected to be harmful to aquatic effectsAn environmental hazard cannot be excluded in the event of unprofessional handling or and degradabilityNot name: ANSULITE 3% AFFF (AFC-3-A)1521 Version #: 01 Revision date: 08-30-2010 F-9743 MSDS US3 / 513. Disposal ConsiderationsDisposal instructionsThis product, in its present state, when discarded or disposed of, is not a hazardous wasteaccording to Federal regulations (40 CFR (b)(4)).

8 Under RCRA, it is the responsibility ofthe user of the product to determine, at the time of disposal, whether the product meets RCRA criteria for hazardous waste. Dispose of waste MATERIAL according to Local, State, Federal, andProvincial Environmental from residues / unusedproductsDispose of in accordance with local Transport InformationDOTNot regulated as dangerous Regulatory InformationUS federal regulationsThis product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR components are on the EPA TSCA Inventory EPCRA (SARA Title III) Section 313 - Toxic Chemical: De minimis concentrationButyl Carbitol (CAS 112-34-5) % N230US EPCRA (SARA Title III) Section 313 - Toxic Chemical: Listed substanceButyl Carbitol (CAS 112-34-5)Listed.

9 N230 CERCLA (Superfund) reportable quantityNoneSuperfund Amendments and Reauthorization Act of 1986 (SARA)Hazard categoriesAcute Health - YesChronic Health - NoFire Hazard - NoPressure Hazard - NoReactivity Hazard - NoSection 302 extremelyhazardous substanceNoSection 311 hazardouschemicalNoInventory statusCountry(s) or regionInventory nameOn inventory (yes/no)*YesAustraliaAustralian Inventory of Chemical Substances (AICS)NoCanadaDomestic Substances List (DSL)NoCanadaNon-Domestic Substances List (NDSL)NoChinaInventory of Existing Chemical Substances in China (IECSC)YesEuropeEuropean Inventory of Existing Commercial ChemicalSubstances (EINECS)NoEuropeEuropean List of Notified Chemical Substances (ELINCS)NoJapanInventory of Existing and New Chemical Substances (ENCS)YesKoreaExisting Chemicals List (ECL)YesNew ZealandNew Zealand InventoryNoPhilippinesPhilippine Inventory of Chemicals and Chemical Substances(PICCS)YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)State regulationsThis product does not contain a chemical known to the State of California to cause cancer, birthdefects or other reproductive - New Jersey Community RTK (EHS Survey): Reportable thresholdButyl Carbitol (CAS 112-34-5)500 LBSUS - Pennsylvania RTK - Hazardous Substances: Listed substanceButyl Carbitol (CAS 112-34-5) name.

10 ANSULITE 3% AFFF (AFC-3-A)1521 Version #: 01 Revision date: 08-30-2010 F-9743 MSDS US4 / 516. Other InformationFurther informationHMIS is a registered trade and service mark of the ratingsHealth: 1 Flammability: 0 Physical hazard: 0 NFPA ratingsHealth: 1 Flammability: 0 Instability: 0 DisclaimerThe information provided in this SAFETY data SHEET is correct to the best of our knowledge,information and belief at the date of its publication. The information given is designed only as aguidance for safe handling, use, processing, storage, transportation, disposal and release and isnot to be considered a warranty or quality specification. The information relates only to thespecific MATERIAL designated and may not be valid for such MATERIAL used in combination with anyother materials or in any process, unless specified in the date08-30-2010 MATERIAL name: ANSULITE 3% AFFF (AFC-3-A)1521 Version #: 01 Revision date: 08-30-2010 F-9743 MSDS US5 / 5


Related search queries