Material Safety Data Sheet - CAG Purification

1 SYLOBEAD MS 512Q08539 Industrial applicationsQUADRA CHEMICALS TessierVaudreuil-Dorion, QuebecCanada J7V 5V5 Tel: 1-800-665-6553 TRANSPORTATION EMERGENCY - 24 HRS/DAY - 7 DAYS/WEEKIN CANADA - CALL 1-800-567-74557/20 Safety data SheetProduct nameSupplierMaterial usesCodeValidation dateIn case of emergencyResponsible nameRegulatory Affairs / Affaires r glementairesSYLOBEAD MS 512:::::::Protective ClothingProduct and company identification1 .WHMISTDGI nhalation. overviewHazards identificationRoutes of entryPotential acute health effectsExposure to airborne concentrations above statutory or recommended exposure limitsmay cause irritation of the nose, throat and to airborne concentrations above statutory or recommended exposure limitsmay cause irritation of the known significant effects or critical known significant effects or critical stateSolid.

2 [Beads.]CANCER HAZARD - CONTAINS Material WHICH CAN CAUSE and/or processing of this Material may generate a dust which can causemechanical irritation of the eyes, skin, nose and throat. Avoid exposure - obtain specialinstructions before use. Do not breathe dust. Contains Material which can causecancer. Risk of cancer depends on duration and level of exposure.::::::: .Potential chronic health effectsCarcinogenicity:Contains Material which can cause cancer. Risk of cancer depends on duration andlevel of :No known significant effects or critical :No known significant effects or critical effects:No known significant effects or critical effects:Repeated or prolonged inhalation of dust may lead to chronic crystalline silica, which may cause lung effects:No known significant effects or critical signs/symptomsTarget organs:Not MS 512 Page: 2/5 Hazards identification2.

3 See toxicological information (section 11)Medical conditionsaggravated by over-exposureNone known.:Ingestion:No specific :No specific :Adverse symptoms may include the following:irritationrednessInhalation:Ad verse symptoms may include the following:respiratory tract irritationcoughingComposition/informatio n on ingredientsNameCAS number%3 .There are no additional ingredients present which, within the current knowledge of the supplier and in theconcentrations applicable, are classified as hazardous to health or the environment and hence require reporting inthis - 100silica -cristalline, - 1 Wash out mouth with water. Do not induce vomiting unless directed to do so by medicalpersonnel. Never give anything by mouth to an unconscious person.

4 Get medicalattention for and remove any contact lenses. Immediately flush eyes with plenty of waterfor at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medicalattention case of contact, immediately flush skin with plenty of water for at least 15 minuteswhile removing contaminated clothing and shoes. Wash clothing before reuse. Cleanshoes thoroughly before reuse. Get medical attention exposed person to fresh air. If not breathing, if breathing is irregular or ifrespiratory arrest occurs, provide artificial respiration or oxygen by trained tight clothing such as a collar, tie, belt or waistband. Get medical aid measuresEye contactSkin contactInhalationIngestionNo specific treatment.

5 Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or to physician:::::4 .Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. If it issuspected that fumes are still present, the rescuer should wear an appropriate mask orself-contained breathing apparatus. Wash contaminated clothing thoroughly with waterbefore removing it, or wear an extinguishing agent suitable for the surrounding measuresExtinguishing mediaPromptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without specific fire or explosion protectiveequipment for fire-fightersFire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.

6 :5 .Special exposure hazards:None :Not suitable:Hazardous thermaldecomposition products:Decomposition products may include the following materials:metal oxide/oxidesFlammability of the product:SYLOBEAD MS 512 Page: 3/5No action shall be taken involving any personal risk or without suitable surrounding areas. Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilled Material . Avoid breathing dust. Provideadequate ventilation. Wear appropriate respirator when ventilation is inadequate. Puton appropriate personal protective equipment (see section 8).Environmental precautionsAccidental release measures:Avoid dispersal of spilled Material and runoff and contact with soil, waterways, drainsand sewers.

7 Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).Personal precautions:6 .Methods for cleaning upMove containers from spill area. Vacuum or sweep up Material and place in adesignated, labeled waste container. Dispose of via a licensed waste disposalcontractor.:Spill or leakStore in accordance with local regulations. Store in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatible materialsand food and drink. Keep container tightly closed and sealed until ready for that have been opened must be carefully resealed and kept upright toprevent leakage. Do not store in unlabeled containers.

8 Use appropriate containment toavoid environmental on appropriate personal protective equipment (see section 8). Eating, drinking andsmoking should be prohibited in areas where this Material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking and not get in eyes or on skin or clothing. Do not ingest. Avoid breathing dust. If duringnormal use the Material presents a respiratory hazard, use only with adequate ventilationor wear appropriate respirator. Keep in the original container or an approved alternativemade from a compatible Material , kept tightly closed when not in use. Empty containersretain product residue and can be hazardous. Do not reuse and storageHandlingStorage::7.

9 Exposure controls/personal protectionProduct nameExposure limitsUse a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safeworking limits of the selected protectionRespiratoryConsult local authorities for acceptable exposure -cristalline, quartzACGIH TLV (United States). Notes: Respirable fraction TWA: mg/m 8 hour(s).:Chemical-resistant, impervious gloves complying with an approved standard should beworn at all times when handling chemical products if a risk assessment indicates this :8 .Engineering measures:Use only with adequate ventilation.

10 If user operations generate dust, fumes, gas, vaporor mist, use process enclosures, local exhaust ventilation or other engineering controlsto keep worker exposure to airborne contaminants below any recommended or measures:Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period. Appropriatetechniques should be used to remove potentially contaminated clothing. Washcontaminated clothing before reusing. Ensure that eyewash stations and Safety showersare close to the workstation monitoringprocedures:If this product contains ingredients with exposure limits, personal, workplace atmosphereor biological monitoring may be required to determine the effectiveness of the ventilationor other control measures and/or the necessity to use respiratory protective MS 512 Page: 4/5 Exposure controls/personal protection8.