Material Safety Data Sheet - Fankim

1 Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 1 / 11 SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Bardac 22 Product Use Description : Cleaning/washing agents and disinfectants Company : Lonza Inc. 90 Boroline Road Allendale, NJ 07401 Telephone : 1-201-316-9200 Emergency telephone number : CHEMTREC 1-800-424-9300 SECTION 2.

2 HAZARDS IDENTIFICATION Emergency Overview Danger Colour: light yellow, Odour: solvent-like Hazard Summary : Causes burns. Flammable. Handle in accordance with good industrial hygiene and Safety practice. OSHA Hazards : CORROSIVE FLAMMABLE LIQUID Potential Health Effects Primary Routes of Entry : Inhalation Ingestion Eyes Skin Inhalation : No information available. Skin : Causes skin burns. Eyes : Causes eye burns.

3 Ingestion : Harmful or fatal if swallowed. Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 2 / 11 SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS-No. Weight percent Didecyldimethylammonium chloride 7173-51-5 50,00 Propan-2-ol 67-63-0 20,00 Water 7732-18-5 30,00 SECTION 4. FIRST AID MEASURES First aid procedures Inhalation : Move to fresh air.

4 Call a physician immediately. If breathing is irregular or stopped, administer artificial respiration. Skin contact : After contact with skin, wash immediately with plenty of soap and water. Call a physician immediately. Take off all contaminated clothing immediately. Eye contact : Immediately flush eye(s) with plenty of water. Call a physician immediately. Ingestion : Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. SECTION 5. FIRE-FIGHTING MEASURES Flammable properties Flash point : 84 F (29 C) Method: DIN 51755 Part 1 Ignition temperature : 662 F (350 C) Lower explosion limit : %(V) Upper explosion limit : ,7 %(V) Fire fighting Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 3 / 11 Suitable extinguishing media : Dry powder Water spray Foam Further information : Use water spray to cool unopened containers.

5 Protective equipment and precautions for firefighters Specific hazards during fire fighting : Heating or fire can release toxic gas. Special protective equipment for fire-fighters : In the event of fire, wear self-contained breathing apparatus. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions : Use respirator when performing operations involving potential exposure to vapour of the product. Environmental precautions : Do not flush into surface water or sanitary sewer system. Methods for containment / Methods for cleaning up : Contain spillage, and then collect with non-combustible absorbent Material , ( sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13).

6 SECTION 7. HANDLING AND STORAGE Handling Handling : Avoid contact with skin and eyes. Provide sufficient air exchange and/or exhaust in work rooms. Advice on protection against fire and explosion : Highly flammable. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Storage Requirements for storage areas and containers : Keep container tightly closed. To maintain product quality, do not store in heat or direct sunlight. Keep in a dry, cool and well-ventilated place. Further information on storage conditions : Store containers in compliance with the most recent NFPA Code (NFPA 30).

7 Ground all containers prior to pouring. Storage temperature : 140,0 F (60,0 C) Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 4 / 11 Other data : Storage temperature SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure Guidelines Components with workplace control parameters Components CAS-No. Value Control parameters Update Basis Propan-2-ol 67-63-0 TWA 200 ppm 2009 ACGIH STEL 400 ppm 2009 ACGIH REL 400 ppm 980 mg/m3 2005 NIOSH/GUIDE STEL 500 ppm 1 225 mg/m3 2005 NIOSH/GUIDE Engineering measures Personal protective equipment Eye protection.

8 Tightly fitting Safety goggles Face-shield Hand protection : Suitable Material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Skin and body protection : Choose body protection according to the amount and concentration of the dangerous substance at the work place. Rubber or plastic apron Rubber or plastic boots Respiratory protection : In the case of vapour formation use a respirator with an approved filter.

9 Hygiene measures : Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 5 / 11 product. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state : liquid Colour : light yellow Odour : solvent-like Safety data Flash point : 84 F (29 C) Method: DIN 51755 Part 1 Ignition temperature : 662 F (350 C) Lower explosion limit : %(V) Upper explosion limit : ,7 %(V) pH.

10 6,5 - 8 at 10,00 g/l 68 F (20 C) Melting point/range : Note: no data available Boiling point/boiling range : 180 F (82 C) Density : 0,890 g/cm3 at 68 F (20 C) Method: DIN 51757 Water solubility : at 68 F (20 C) Note: completely miscible Viscosity, dynamic : 25 at 68 F (20 C) Method: OECD 114 Note: see user defined free text SECTION 10. STABILITY AND REACTIVITY Conditions to avoid : Remarks: no data available Material Safety data Sheet Bardac 22 Version Revision date print date / CO00000844 Page 6 / 11 Materials to avoid : Remarks: Strong oxidizing agents Reducing agents Hazardous decomposition products : Note: nitrogen oxides (NOx) Hydrogen chloride gas Carbon oxides Thermal decomposition : Remarks: no data available SECTION 11.