Material Safety Data Sheet - New Guard Coatings

1 Material Safety data Sheet Solvalitt AV. 1. Product and company identification Trade name : Solvalitt AV. Material uses : Coatings : Solvent-borne. Manufacturer : Jotun Paints, Inc. 9203 Highway 23. Belle Chasse, LA 70037. Telephone: (800) 229-3538 or (504) 394-3538. In case of emergency : 1-800-424-9300. silicone acrylic 1119 1 1119. VValidationDate). 1. 2. Hazards identification Physical state : Liquid. Odor : Characteristic. OSHA/HCS status : This Material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR ). WARNING! FLAMMABLE LIQUID AND VAPOR.

2 CONTAINS Material THAT MAY CAUSE. TARGET ORGAN DAMAGE, BASED ON ANIMAL data . POSSIBLE CANCER. HAZARD - CONTAINS Material WHICH MAY CAUSE CANCER, BASED ON. ANIMAL data . Flammable liquid. Keep away from heat, sparks and flame. Avoid exposure - obtain special instructions before use. Do not breathe vapor or mist. Avoid contact with skin and clothing. Contains Material that may cause target organ damage, based on animal data . Contains Material which may cause cancer, based on animal data . Risk of cancer depends on duration and level of exposure. Use only with adequate ventilation.

3 Keep container tightly closed and sealed until ready for use. Eyes : May cause eye irritation. Skin : May cause skin irritation. Inhalation : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards. Potential chronic health : CARCINOGENIC EFFECTS: Classified A4 (Not classifiable for humans or animals.) by effects ACGIH, 3 (Not classifiable for humans.) by IARC [xylene]. Classified A4 (Not classifiable for humans or animals.) by ACGIH [aluminium stabilized]. Classified A3 (Proven for animals.) by ACGIH, 2B (Possible for humans.)

4 By IARC [ethylbenzene]. Classified 3. (Not classifiable for humans.) by IARC [zeolite]. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. Medical conditions : Pre-existing disorders involving any target organs mentioned in this MSDS as being at aggravated by over- risk may be aggravated by over-exposure to this product. exposure See toxicological information (Section 11). Continued on next page Solvalitt AV Page: 2/10. 3. Composition/information on ingredients Name CAS number % by weight xylene 1330-20-7 10 - 25. aluminium stabilized 7429-90-5 10 - 25.

5 Mica 12001-26-2 10 - 25. Naphtha (petroleum), hydrodesulfurized heavy 64742-82-1 - 10. Stoddard solvent 8052-41-3 - 10. ethylbenzene 100-41-4 - 10. butan-1-ol 71-36-3 1 - Solvent naphtha (petroleum), light aromatic 64742-95-6 1 - Components not listed are not physical or health hazards as defined in 29 CFR (Hazard Communication Standard). 4. First aid measures Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately. Skin contact : In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.

6 Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention immediately. Inhalation : Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately. Ingestion : Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.

7 Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. 5. Fire-fighting measures Flammability of the product : May be combustible at high temperature. Products of combustion : Decomposition products may include the following materials: carbon dioxide carbon monoxide metal oxide/oxides Suitable : Use dry chemical, CO , water spray (fog) or foam. Not suitable : Do not use water jet. Special exposure hazards : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.

8 No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool. Flammable liquid. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. Runoff to sewer may create fire or explosion hazard. Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

9 Continued on next page Solvalitt AV Page: 3/10. 6. Accidental release measures Personal precautions : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled Material . Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see Section 8).

10 Environmental precautions : Avoid dispersal of spilled Material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Methods for cleaning up : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non- combustible, absorbent Material sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13).