Material Safety Data Sheet - QC Lubricants

1 Material Safety data and company identificationProduct nameBraycote 601 EFMSDS #451695 Historic MSDS #:25012-AEProduct useLubricantFor specific application advice see appropriate Technical data Sheet or consult our Industrial North America, W. Warrenville RoadNaperville, IL 60563 SupplierCastrol Industrial North America, W. Warrenville RoadNaperville, IL 60563 Product Information: +1-877-641-1600 EMERGENCY SPILLINFORMATION:1 (800) 424-9300 CHEMTREC (USA) identificationPhysical overviewCAUTION !MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN accordance with good industrial hygiene and Safety work practices, airborne exposures shouldbe controlled to the lowest extent practicable. Avoid contact with eyes, skin and clothing. Use onlywith adequate ventilation. Keep container tightly closed and sealed until ready for use.

2 Washthoroughly after contact. Eye contact. Inhalation. of entryPotential health effectsEyesMay cause eye cause skin cause respiratory tract may cause gastrointestinal irritation and toxicological information (Section 11) on ingredientsThis product does not contain any hazardous ingredients at or above regulated of issue03/03 : 1/6 Braycote 601 EFENGLISH(ENGLISH)Product nameProduct codeVersion2 FormatLanguageUS451695-US03(US) aid measuresEye contactIn case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medicalattention if symptoms contactFlush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Washclothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if inhaled, remove to fresh air.

3 Get medical attention if symptoms not induce vomiting unless directed to do so by medical personnel. Never give anything bymouth to an unconscious person. If potentially dangerous quantities of this Material have beenswallowed, call a physician immediately. Get medical attention if symptoms to physicianNote: High Pressure ApplicationsInjections through the skin resulting from contact with the product at high pressure constitute amajor medical emergency. Injuries may not appear serious at first but within a few hours tissuebecomes swollen, discolored and extremely painful with extensive subcutaneous exploration should be undertaken without delay. Thorough and extensive debridement ofthe wound and underlying tissue is necessary to minimize tissue loss and prevent or limitpermanent damage.

4 Note that high pressure may force the product considerable distances alongtissue measuresSpecial remarks on firehazardsHazardous decomposition products: Hydrogen fluoride (HF). and carbonyl isolate the scene by removing all persons from the vicinity of the incident if there is a action shall be taken involving any personal risk or without suitable clothing (fire)Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus(SCBA) with a full face-piece operated in positive pressure proceduresHazardous combustionproductsCombustion products may include the following:halogenated compoundscarbon oxides (CO, CO2) (carbon monoxide, carbon dioxide)nitrogen oxides (NO, NO2etc.)In a fire or if heated, a pressure increase will occur and the container may hazardsFlash pointNot mediaSuitableUse an extinguishing agent suitable for the surrounding not use water release measuresNo action shall be taken involving any personal risk or without suitable training.

5 Keep unnecessaryand unprotected personnel from entering. Do not touch or walk through spilled Material . Inaccordance with good industrial hygiene and Safety work practices, airborne exposures should becontrolled to the lowest extent practicable. Provide adequate ventilation. Wear appropriaterespirator when ventilation is inadequate. Put on appropriate personal protective equipment (seeSection 8).Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevententry into sewers, water courses, basements or confined areas. Wash spillages into an effluenttreatment plant or proceed as follows. Contain and collect spillage with non-combustible,absorbent Material sand, earth, vermiculite or diatomaceous earth and place in container fordisposal according to local regulations (see section 13).

6 Dispose of via a licensed waste disposalcontractor. Contaminated absorbent Material may pose the same hazard as the spilled : see section 1 for emergency contact information and section 13 for waste dispersal of spilled Material and runoff and contact with soil, waterways, drains and the relevant authorities if the product has caused environmental pollution (sewers,waterways, soil or air).Personal precautionsLarge spillMethods for cleaning upDate of issue03/03 : 2/6 Braycote 601 EFENGLISH(ENGLISH)Product nameProduct codeVersion2 FormatLanguageUS451695-US03(US)Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry Material and place in anappropriate waste disposal container.

7 Dispose of via a licensed waste disposal and storageHandlingPut on appropriate personal protective equipment (see Section 8). Workers should wash handsand face before eating, drinking and smoking. Do not breathe vapor or mist. Do not ingest. Avoidcontact with eyes, skin and clothing. Use only with adequate ventilation. Wear appropriaterespirator when ventilation is in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10). Keep container tightly closedand sealed until ready for use. Containers that have been opened must be carefully resealed andkept upright to prevent leakage. Do not store in unlabeled containers. Use appropriatecontainment to avoid environmental controls/personal protectionOccupational exposure limitsThis product does not have any assigned states may enforce more stringent exposure MeasuresUse only with adequate ventilation.

8 If user operations generate dust, fumes, gas, vapor or mist,use process enclosures, local exhaust ventilation or other engineering controls to keep workerexposure to airborne contaminants below any recommended or statutory measuresWash hands, forearms and face thoroughly after handling chemical products, before eating,smoking and using the lavatory and at the end of the working period. Appropriate techniquesshould be used to remove potentially contaminated clothing. Wash contaminated clothing protectionEyesAvoid contact with eyes. Safety glasses with side shields or chemical and bodyAvoid contact with skin and clothing. Wear suitable protective adequate ventilation. In accordance with good industrial hygiene and Safety work practices,airborne exposures should be controlled to the lowest extent correct choice of protective gloves depends upon the chemicals being handled, the conditionsof work and use, and the condition of the gloves (even the best chemically resistant glove willbreak down after repeated chemical exposures).

9 Most gloves provide only a short time ofprotection before they must be discarded and replaced. Because specific work environments andmaterial handling practices vary, Safety procedures should be developed for each intendedapplication. Gloves should therefore be chosen in consultation with the supplier/manufacturer andwith a full assessment of the working and chemical kg/m3( g/cm3) at CDensityFlash pointNot in of issue03/03 : 3/6 Braycote 601 EFENGLISH(ENGLISH)Product nameProduct codeVersion2 FormatLanguageUS451695-US03(US) and reactivityThe product is or incompatible with the following materials: Alkali metals and halogenated Alkali or Lewis acids at high normal conditions of storage and use, hazardous decomposition products should not all possible sources of ignition (spark or flame).

10 Stability and reactivityConditions to avoidIncompatibility withvarious substancesHazardous decompositionproductsUnder normal conditions of storage and use, hazardous polymerization will not polymerizationPossibility of hazardousreactionsUnder normal conditions of storage and use, hazardous reactions will not informationDecomposition products thermal decomposition may release hazardous gases. Hydrogen fluoride(HF).: Inhalation of decomposition products (occurs if heated > 260 C) or of smoke fromcontaminated tobacco products may cause respiratory irritation and induce Polymer Fume Fevercondition. Symptoms of exposure to decomposition products are: lung irritation, pulmonaryedema, flu-like symptoms (example - fever chills).Other Toxicity DataPotential chronic health effectsCarcinogenicityNo known significant effects or critical informationEcological Grease insoluble in testing has been performed by the considerationsWaste informationThe generation of waste should be avoided or minimized wherever possible.