Material Safety Data Sheet SECTION 1: PRODUCT …

1 Material Safety data Sheet 3M(TM) Scotch-Weld(TM) Nitrile High Performance Plastic Adhesive 1099 01/28/2008_____Page 1of 8 MaterialSafety data Sheet Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: 3M(TM) Scotch-Weld(TM) Nitrile High Performance Plastic Adhesive 1099 MANUFACTURER: 3 MDIVISION: Industrial Adhesives and Tapes DivisionADDRESS: 3M CenterSt.

2 Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 01/28/2008 Supercedes Date: 09/29/2005 Document Group:10-2442-1 PRODUCT Use:Specific Use:plastic adhesiveIntended Use:Industrial useSECTION 2: by WtAcetone67-64-160 -70 Acrylonitrile-Butadiene Polymer9003-18-310 -20 Phenolic Resin25085-50-15 -10 Phenolic Polymer55185-45-05 -10 Salicylic Acid69-72-71 -5 Zinc Oxide1314-13-21 -3 SECTION 3: HAZARDS EMERGENCY OVERVIEWOdor, Color, Grade: White/pink to light tan liquid -ketone odorGeneral Physical Form: Liquid Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure and explode.

3 Extremely flammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause target organ effects. POTENTIAL HEALTH EFFECTSMATERIAL Safety data Sheet 3M(TM) Scotch-Weld(TM) Nitrile High Performance Plastic Adhesive 1099 01/28/2008_____Page 2of 8 Eye Contact:Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact:Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and :RespiratoryTract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat absorbed following inhalation and cause target organ :Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and absorbed following ingestion and cause target organ Organ Effects:Central Nervous System (CNS) Depression.

4 Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness. SECTION 4: FIRST AID FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention. Inhalation: Remove person to fresh air.

5 If signs/symptoms develop, get medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. SECTION 5: FIRE FIGHTING FLAMMABLE PROPERTIESA utoignition temperature465 C [Details: Acetone]Flash Point-4 F [Test Method: Closed Cup]Flammable Limits % volumeFlammable Limits % volumeOSHA Flammability Classification:Class IB Flammable LiquidMATERIAL Safety data Sheet 3M(TM) Scotch-Weld(TM) Nitrile High Performance Plastic Adhesive 1099 01/28/2008_____Page 3of EXTINGUISHING MEDIAUse fire extinguishers with class B extinguishing agents ( , dry chemical, carbon dioxide).

6 PROTECTION OF FIRE FIGHTERSS pecial Fire Fighting Procedures: Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: Closed containers exposed to heat from fire may build pressure and explode. Extremely flammable liquid and vapor. Vapors may travel long distances along the ground or floorto an ignition source and flash back. Note: See STABILITY AND REACTIVITY ( SECTION 10) for hazardous combustion and thermal decomposition 6: ACCIDENTAL RELEASE MEASURESA ccidental Release Measures:Refer to other sections of this MSDS for information regarding physical and health hazards, respiratoryprotection, ventilation, and personal protective equipment.

7 Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Remove all ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-sparking tools. Ventilatethe area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode.

8 Contain spill. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. Cover spill area with a fire-extinguishing foam. An aqueous film forming foam (AFFF) is recommended. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent Material . Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent Material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled Material as possible using non-sparking tools.

9 Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow Safety precautions on the solvent label and MSDS. Collect the resulting residue containing solution. Place in a metal container approved for transportation by appropriate authorities. Seal the container. Dispose of collected Material as soon as possible. In the event of a release of this Material , the user should determine if the release qualifies as reportable according to local, state, and federal 7: HANDLING AND HANDLINGDo not eat, drink or smoke when using this PRODUCT .

10 Wash exposed areas thoroughly with soap and water. Contents may be under pressure, open carefully. Ground containers securely when transferring contents. Wear low static or properly grounded shoes. Avoid breathing of vapors, mists or spray. Avoid static discharge. Avoid eye contact with vapors, mists, or spray. Keep out of the reach of children. Vapors may ignite explosively. May cause flash fire. Prevent build-up of vapors -open all windows and doors. Maintain vapor concentrations below recommended exposure limits. Use only with cross-ventilation. Without adequate ventilation, vapors may settle in low-lying areas.