Example: marketing

Material Safety Data Sheet SECTION 1: PRODUCT AND …

3M Material Safety DATA Sheet 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 12/22/2006_____ Page 1 of 8 Material Safety Data SheetCopyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properlyutilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement isobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profitthereon. SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol)MANUFACTURER: 3 MDIVISION: Construction And Home Improvement ProdsADDRESS: 3M Center St.

Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt CYCLOHEXANE 110-82-7 7 - 13 This material contains a chemical which requires export notification under TSCA Section 12[b]: Ingredient (Category if applicable) C.A.S. No Regulation Status

Tags:

  Section, Chemical, Subject, Cast, Chemicals subject, Tsca section 12

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Material Safety Data Sheet SECTION 1: PRODUCT AND …

1 3M Material Safety DATA Sheet 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 12/22/2006_____ Page 1 of 8 Material Safety Data SheetCopyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properlyutilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement isobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profitthereon. SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol)MANUFACTURER: 3 MDIVISION: Construction And Home Improvement ProdsADDRESS: 3M Center St.

2 Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 12/22/2006 Supercedes Date: Initial IssueDocument Group: 22-4028-1 PRODUCT Use:Intended Use:Adhesive aerosolSpecific Use:hi-strength aerosol adhesive SECTION 2: by Wt DIMETHYL ETHER 115-10-6 35 - 45 METHYL ACETATE 79-20-9 25 - 35 CYCLOHEXANE 110-82-7 7 - 13 Non-volatile components Trade Secret (typically ) PENTANE 109-66-0 1 - 5 1,1-DIFLUOROETHANE 75-37-6 1 - 5 METHYL CHLORIDE 74-87-3 0 - SECTION 3: HAZARDS EMERGENCY OVERVIEWS pecific Physical Form: AerosolOdor, Color, Grade: clear, sweet fruity odorGeneral Physical Form: GasImmediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build pressure andexplode.

3 Extremely flammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source andflash back. Aerosol container contains flammable Material under pressure. May cause target organ Material Safety DATA Sheet 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 12/22/2006_____ Page 2 of POTENTIAL HEALTH EFFECTSEye Contact:Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy Contact:May be absorbed through skin and cause target organ or repeated exposure may cause:Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and :Upper Respiratory Tract Irritation.

4 Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and noseand throat be absorbed following inhalation and cause target organ concentration and inhalation may be harmful or :Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and be absorbed following ingestion and cause target organ Organ Effects: Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea,slowed reaction time, slurred speech, giddiness, and or repeated exposure, above recommended guidelines, may cause:Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness Effects: Signs/symptoms may include reduced or absent urine production, increased serum creatinine, lower backpain, increased protein in urine, and increased blood urea nitrogen (BUN).

5 SECTION 4: FIRST AID FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices Material Safety DATA Sheet 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 12/22/2006_____ Page 3 of 8 Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical : Remove person to fresh air. If signs/symptoms develop, get medical Swallowed: Do not induce vomiting.

6 Give victim two glasses of water. Never give anything by mouth to an unconsciousperson. Get immediate medical attention. SECTION 5: FIRE FIGHTING FLAMMABLE PROPERTIES Autoignition temperature No Data Available Flash Point F [Test Method: Tagliabue Closed Cup] Flammable Limits - LEL No Data Available Flammable Limits - UEL No Data Available OSHA Flammability Classification: Class IA Flammable EXTINGUISHING MEDIAUse fire extinguishers with class B extinguishing agents ( , dry chemical , carbon dioxide). PROTECTION OF FIRE FIGHTERSS pecial Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus(SCBA).Unusual Fire and Explosion Hazards: Closed containers exposed to heat from fire may build pressure and explode.

7 Extremelyflammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Aerosolcontainer contains flammable Material under : See STABILITY AND REACTIVITY ( SECTION 10) for hazardous combustion and thermal decompositioninformation. SECTION 6: ACCIDENTAL RELEASE MEASURESA ccidental Release Measures: Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up byqualified personnel. Remove all ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-sparking tools. Ventilate the area with fresh air. If possible, seal leaking container. Place leaking containers in a well-ventilated area,preferably an operating exhaust hood, or if necessary outdoors on an impermeable surface until appropriate packaging for the leakingcontainer or its contents is available.

8 Close cylinder. If the cylinder can't be closed, place in a well-ventilated area, preferably anoperating exhaust hood, or if necessary outdoors. Dispose of collected Material as soon as possible. Discharge the resulting residuecontaining solution to a municipal or industrial wastewater treatment the event of a release of this Material , the user should determine if the release qualifies as reportable according tolocal, state, and federal regulations. SECTION 7: HANDLING AND HANDLING3M Material Safety DATA Sheet 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 12/22/2006_____ Page 4 of 8Do not eat, drink or smoke when using this PRODUCT .

9 Wash exposed areas thoroughly with soap and water. Keep away from heat,sparks, open flame, pilot lights and other sources of ignition. Avoid prolonged or repeated skin contact. Avoid eye contact withvapors, mists, or spray. Keep out of the reach of children. Vapors may ignite explosively. May cause flash fire. Prevent build-up ofvapors - open all windows and doors. Maintain vapor concentrations below recommended exposure limits. Use only with cross-ventilation. Without adequate ventilation, vapors may settle in low-lying areas. Keep away from heat, sparks, and open flame. Do notsmoke or ignite matches, lighters, STORAGES tore away from acids. Store away from heat. Store out of direct sunlight. SECTION 8: EXPOSURE CONTROLS/PERSONAL ENGINEERING CONTROLSUse with appropriate local exhaust ventilation.

10 Do not use in a confined area or areas with little or no air movement. Use generaldilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/orcontrol mist, vapor, or spray. If ventilation is not adequate, use respiratory protection PERSONAL PROTECTIVE EQUIPMENT (PPE) Eye/Face ProtectionAvoid eye contact. Avoid eye contact with vapors, mists, or following eye protection(s) are recommended: Safety Glasses with side Skin ProtectionGloves not normally required. Avoid skin contact. Avoid prolonged or repeated skin Respiratory ProtectionAvoid breathing of vapors, mists or spray. Consult the current 3M Respirator Selection Guide for additional information or call 1-800-243-4630 for 3M technical one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance withOSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges.


Related search queries