MATERIAL SAFETY DATA SHEET THE CORTEC …

1 MATERIAL SAFETY DATA SHEETTHE CORTEC CORPORATION4119 WHITE BEAR PARKWAYST. PAUL, minnesota 55110 PHONE: 651-429-1100 OR TOLL FREE 1-800-4-CORTECFAX: 651-429-1122 EMERGENCY PHONE NO.: CHEMTREC (FOR SPILL, LEAK,FIRE, EXPOSURE OR ACCIDENT): 1-800-424-9300 (DAY ORNIGHT)* * * * * * * * * * * * * * * * * *VpCI -329 U* * * * * * * * * * * * * * *SECTION I - PRODUCT IDENTIFICATIONPRODUCT NAME:VpCI -329 UPRODUCT DESCRIPTION: A proprietary blend of corrosioninhibitors in an oil II - INGREDIENTSINGREDIENTNAME(S)WEIGHTPERCEN TOCCUPATIONAL EXPOSURELIMITSTLV OR PELORALLD-50 Naphthenicdistillates60-655mg/m3(oil mist) III - PHYSICAL DATACOLOR: Tan to brown viscous PHYSICAL FORM: LiquidNON-VOLATILE (weight): 87-92% ODOR: PetroleumpH: BOILING RANGE.

2 RANGE: VAPOR DENSITY: RATE: VAPOR PRESSURE: GALLON: lb/gal ( kg/l)SECTION IV - FIRE AND EXPLOSION DATAHMIS FLAMMABILITY RATING: 1 FLASH POINT: 295 F (146 C) (COC)FLAMMABLE LIMITS: LEL: UEL: MEDIA: Carbon dioxide or other drychemical fire fighting FIRE AND EXPLOSION HAZARDS: FIRE FIGHTING PROCEDURES: Firefighters shouldwear self-contained breathing apparatus. Cool tanks andcontainer exposed to fire with V - HEALTH HAZARD DATAEMERGENCY AND FIRST AID PROCEDURES:Eye Contact: Flush eyes with large amounts of water.

3 Consulta physician immediately. Skin Contact: Wash affected areawith soap and water. If irritation persists, consult a : Remove to an uncontaminated area, administeroxygen if necessary. If victim has stopped breathing beginCPR. Get medical attention. Ingestion: If conscious, give waterbut do not induce vomiting. Get immediate medical CONDITIONS PRONE TO AGGRAVATION BYEXPOSURE: None knownPRIMARY ROUTES OF ENTRY: Inhalation, skin and HAZARDS (acute and chronic) / EFFECTS or prolonged skin contact with petroleum andrelated products tend to remove natural skin oils leading toirritation and with eye tissues will cause irritation and possibledamage unless first aid measures are of product vapors is not expected at ambienttemperatures because of the low vapor pressure of theproduct.

4 Inhalation of particle mists or vapors from hotproduct may be harmful to the respiratory exposure to mists, fumes or Ingestion of this product is expected to be could result in aspiration into the lungspossibly leading to chemical VI - REACTIVITY DATASTABILITY: StableHAZARDOUS POLYMERIZATION: Will not DECOMPOSITION PRODUCTS: Oxides ofcarbon and : Strong acids, alkalis and oxidizing TO AVOID: Contact with incompatible VII - SPILL OR LEAK PROCEDURESSTEPS TO BE TAKEN IN CASE MATERIAL IS RELEASEDOR SPILLED: Absorb on sweeping compound or otherabsorbent MATERIAL .

5 Keep petroleum out of streams DISPOSAL: Incinerate or dispose of in accordancewith existing Federal, State and Local VIII - SAFE HANDLING AND USE INFORMATIONRESPIRATORY PROTECTION: A NIOSH approved respiratorto remove vapors or particle mists when GLOVES: Chemical resistant rubber or PROTECTION: SAFETY PROTECTIVE EQUIPMENT: Eye wash stationSECTION IX - SPECIAL PRECAUTIONS AND STORAGE APRECAUTIONS TO BE TAKEN IN HANDLING: Avoid contactwith skin and eyes. Avoid inhalation of TO BE TAKEN IN STORING: Do not attemptto clean since residue is difficult to remove.

6 Completely drain"Empty" drums , properly bung and promptly dispose in anenvironmentally safe manner and in accordance withgovernmental regulations. Recycle drums only throughqualified reprocessing X - SHIPPING DATADOT/IMDG/IATA SHIPPING NAME: / NUMBER: HAZARD CLASS.: STATUS: ListedDOT/IMDG/IATA REQUIRED LABELS: SHIPPING NAME: CLASS BULK: Same as aboveLTL: 65 TL: 35 MW: 30 PREPARED BY: Alla Furman, Sr. Corrosion EngineerAPPROVED BY: Margarita Kharshan, Lab DirectorDATE PREPARED: 5/15/03 SUPERSEDES: noneDISCLAIMER: This information is furnished without warranty,expressed or implied, except that it is accurate to the bestknowledge of the CORTEC Corporation.

7 The data on this sheetrelates only to the specific MATERIAL designated herein. TheCortec Corporation assumes no legal responsibility for use orreliance upon this = NOT ESTABLISHED = NOT APPLICABLE