Material Safety Data Sheet - Titebond

1 Material Safety data SheetProduct and company identification1 .Franklin International2020 Bruck StreetColumbus OH 4320711/19 of revisionPrint dateChemtrec (24 Hour)::::Product type:Aliphatic resin11/19 International:(800) 424 - 9300(703) 527 - 3887 Contact person:Telephone:Emergency phone::Franklin Technical Services(800) 877-4583 Franklin Security(614) 445-1300 Product code:5065 Titebond Original Wood GlueProduct name:Product use:Wood family:Reference number:2213 Eye contact. Inhalation. overviewHazards identificationRoutes of entryPotential acute health effectsInhalation of oil mist or vapors at elevated temperatures may cause respiratory known significant effects or critical irritating to eyes.

2 This product may irritate eyes upon known significant effects or critical irritating to the skin. Prolonged or repeated contact can defat the skin and leadto irritation, cracking and/or !MAY CAUSE EYE AND SKIN irritating to eyes. Slightly irritating to the skin. Avoid breathing vapor or contact with eyes, skin and clothing. Wash thoroughly after handling.:::::::Odor:Faint status:This Material is considered hazardous by the OSHA Hazard Communication Standard(29 CFR ).2 .Potential chronic health effectsCarcinogenicity:No known significant effects or critical :No known significant effects or critical :No known significant effects or critical effects:No known significant effects or critical effects:No known significant effects or critical Original Wood GlueHazards identification2.

3 See toxicological information (section 11)Medical conditionsaggravated by over-exposureNone known.:Fertility effects:No known significant effects or critical signs/symptomsIngestion:No specific :Adverse symptoms may include the following:irritationrednessEyes:Adverse symptoms may include the following:irritationwateringrednessInhal ation:No specific organs:May cause damage to the following organs: skin, on ingredients3 .There are no ingredients present which, within the current knowledge of the supplier and in the concentrationsapplicable, are classified as hazardous to health or the environment and hence require reporting in this out mouth with water.

4 Do not induce vomiting unless directed to do so by medicalpersonnel. Never give anything by mouth to an unconscious person. Get medicalattention for and remove any contact lenses. Immediately flush eyes with plenty of waterfor at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medicalattention case of contact, immediately flush skin with plenty of water for at least 15 minuteswhile removing contaminated clothing and shoes. Wash clothing before reuse. Cleanshoes thoroughly before reuse. Get medical attention exposed person to fresh air. If not breathing, if breathing is irregular or ifrespiratory arrest occurs, provide artificial respiration or oxygen by trained tight clothing such as a collar, tie, belt or waistband.

5 Get medical aid measuresEye contactSkin contactInhalationIngestionNo specific treatment. Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or to physician:::::4 .Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. It maybe dangerous to the person providing aid to give mouth-to-mouth an extinguishing agent suitable for the surrounding measuresExtinguishing mediaPromptly isolate the scene by removing all persons from the vicinity of the incident ifthere is a fire. No action shall be taken involving any personal risk or without a fire or if heated, a pressure increase will occur and the container may protectiveequipment for fire-fightersFire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.

6 :5 .Special exposure hazards:None :Not suitable:Flammability of the product:2/9506511/19 Original Wood GlueNo action shall be taken involving any personal risk or without suitable surrounding areas. Keep unnecessary and unprotected personnel fromentering. Do not touch or walk through spilled Material . Avoid breathing vapor or adequate ventilation. Wear appropriate respirator when ventilation isinadequate. Put on appropriate personal protective equipment (see section 8).Stop leak if without risk. Move containers from spill area. Approach release fromupwind. Prevent entry into sewers, water courses, basements or confined and collect spillage with non-combustible, absorbent Material sand, earth,vermiculite or diatomaceous earth and place in container for disposal according to localregulations (see section 13).

7 Dispose of via a licensed waste disposal absorbent Material may pose the same hazard as the spilled : see section 1 for emergency contact information and section 13 for precautionsAccidental release measures:Avoid dispersal of spilled Material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air).Personal precautions:Large spill:6 .Stop leak if without risk. Move containers from spill area. Dispose of via a licensedwaste disposal contractor. Absorb with an inert spill:Store in accordance with local regulations.

8 Store in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatible materials(see section 10) and food and drink. Keep container tightly closed and sealed until readyfor use. Containers that have been opened must be carefully resealed and kept uprightto prevent leakage. Do not store in unlabeled containers. Use appropriate containmentto avoid environmental on appropriate personal protective equipment (see section 8). Eating, drinking andsmoking should be prohibited in areas where this Material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking and not ingest.

9 Avoid contact with eyes, skin and clothing. Avoid breathing vapor or in the original container or an approved alternative made from a compatiblematerial, kept tightly closed when not in use. Empty containers retain product residueand can be hazardous. Do not reuse and storageHandlingStorage::7 .Exposure controls/personal protectionConsult local authorities for acceptable exposure .Engineering measures:No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product contains ingredientswith exposure limits, use process enclosures, local exhaust ventilation or otherengineering controls to keep worker exposure below any recommended or monitoringprocedures.

10 If this product contains ingredients with exposure limits, personal, workplace atmosphereor biological monitoring may be required to determine the effectiveness of the ventilationor other control measures and/or the necessity to use respiratory protective exposure limitsIngredientList nameppmmg/m Otherppmmg/m Otherppmmg/m OtherNotationsNo exposure limit value (8 hours)STEL (15 mins)Ceiling3/9506511/19 Original Wood GlueExposure controls/personal protection8 .Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safeworking limits of the selected eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists protective equipment for the body should be selected based on the task beingperformed and the risks involved and should be approved by a specialist before handlingthis protectionEyesSkinRespiratory.