MATERIALS ENGINEERING LABORATORY DATA …

1 PLASTICS ENGINEERING COMPANYMATERIALS ENGINEERING LABORATORYDATA REPORTPLENCO 07021injection molded3518 LAKESHORE ROAD SHEBOYGAN fax Two-stage +13 ASTM Arc Resistance77 Comparative Tracking Index166 Drop Ball Impact139 PROPERTY metricASTM Test MethodFormGranularApparent Shrinkage* Impact Impact Strength57 Tensile Modulus8,327 Flexural Modulus6,795 Compressive Strength213 Heat Resistance194 Water Hardness85 Dielectric Strength short Factor, , +14 Oxygen Indexg/cm m/m%J/mJ/mJ/mMPaMPaMPaMPaMPa C C%scalekV/mmohm cmsecV%D1895D6289D792D6289D256D256 PlencoD638D638D790D790D695D794D648D570D7 85D149D150D150D257D495D3638D2863UL FlammabilityHB 94E72hr 120 CTensile Temperature154 Coefficient of Thermal ,2701,208,00010,679986,00030, in/inft lb/inft lb/inft lb/inpsipsipsipsipsi F FV/milohm in/ FPLENCO 07021 is impact grade phenolic molding compound.

2 Customers have found this material useful for switchgear parts, or where mechanical assembly requires better impact strength. PLENCO 07021 is UL recognized under component file E40654. 07021 is available in CThermal Conductivity 100 CBtu/hr/ft/ F E1461 The Typical Values listed are results obtained from the testing of standard specimens using the stated test procedures, with said specimens molded under controlled LABORATORY conditions from representative samplings of the product. Although Plastics ENGINEERING Company at all times reserves the right to make changes in the MATERIALS , suppliers and processing, the values listed as typical are those to be expected at the time of our manufacture.

3 The final determination of the accuracy or completeness of any information, the suitability of the product for the use contemplated, the manner of its use, and the matter of any infringement of patents in use, are all the sole responsibility of the user. PLASTICS ENGINEERING COMPANY MAKES NO WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, INCLUDING NO WARRANTY OF THE MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Plastics ENGINEERING Company reserves at all times the right to discontinue the production of any or all of its products. This is an uncontrolled copy and not subject to updates.

4 *Mold Shrinkage obtained under controlled LABORATORY conditions with relatively simple mold geometry and should be used for comparison purposes only and not for actual tool in cool dry