MBF3003 BLIND FASTENER, LOW PRO - …

1 MONOGRAM. AEROSPACE. T HEX R FASTENERS. ACROSS FLATS a TriMas company (MAX GRIP + L) REF. F H BREAK-OFF LIMITS. WRENCH (MEASURED FROM. FLATS (MAX GRIP + G) REF SKIN SURFACE). GRIP DASH NO. MARKING ON TOP. OF DRIVE NUT Z DISTORTION OF D. PERMISSIBLE IN. R LOCKING AREA CRIMP. A. RAD. 5. 2X. J MIN. E MAX. D SCREW. 6 DRIVE NUT SLEEVE K MAX. (COLOR BROWN). NUT INSERT. P. MAX TYPICAL INSTALLATION. MBF3003SA( )-( )-( ) FOR SEALANT APPLICATION. ONLY - EXPOSE TWO TO FOUR THREADS. TABLE I. F (T HEX. R. PART A D E MAX WRENCH (G) H (L) ACROSS Z MAX.)

2 RAD. NUMBER FLATS FLATS). INCH mm INCH mm INCH mm INCH mm INCH mm INCH mm INCH mm INCH mm INCH mm INCH mm .354 8,99 .1645 4,178 .085 2,16 .060 1,524 .030 0,76. MBF3003 -5-( ) .1640 4,166 .058 1,47 .625 15,875 .375 9,52 .030 0,762..334 8,48 .1625 4,128 .080 2,03 .053 1,346 .015 0,38..416 10,57 .1985 5,042 .113 2,87 .070 1,778 .030 0,76. MBF3003 -6-( ) .1985 5,042 .058 1,47 .675 17,145 .375 9,52 .030 0,762..396 10,06 .1965 4,991 .108 2,74 .063 1,600 .015 0,38..416 10,57 .2275 5,778 .121 3,07 .070 1,778 .030 0,76.

3 MBF3003 -7-( ) .2275 5,778 .058 1,47 .862 21,894 .375 9,52 .030 0,762..396 10,06 .2255 5,728 .116 2,95 .063 1,600 .015 0,38..541 13,74 .2595 6,591 .135 3,43 .085 2,159 .030 0,76. MBF3003 -8-( ) .2595 6,591 .058 1,47 .900 22,860 .375 9,52 .040 1,016..521 13,23 .2575 6,541 .130 3,30 .078 1,981 .015 0,38..541 13,74 .2895 7,353 .152 3,86 .085 2,159 .030 0,76. MBF3003 -9-( ) .2895 7,353 .068 1,73 .930 23,622 .500 12,70 .040 1,016..521 13,23 .2875 7,303 .147 3,73 .078 1,981 .015 0,38..635 16,13 .3115 7,912 .152 3,86.

4 105 2,667 .040 1,02. MBF3003 -10-( ) .3110 7,899 .073 1,85 .912 23,164 .500 12,70 .045 1,143..615 15,62 .3095 7,861 .147 3,73 .098 2,489 .025 0,64..635 16,13 .3435 8,725 .185 4,70 .105 2,667 .040 1,02. MBF3003 -11-( ) .3433 8,720 .078 1,98 25,400 .500 12,70 .045 1,143..615 15,62 .3415 8,674 .180 4,57 .098 2,489 .025 0,64..760 19,30 .3745 9,512 .185 4,70 .125 3,175 .040 1,02. MBF3003 -12-( ) .3740 9,500 .083 2,11 27,940 .500 12,70 .045 1,143..740 18,80 .3725 9,462 .180 4,57 .118 2,997 .025 0,64. TABLE I (CONTINUED).

5 INSTALLED DIMENSIONS MECHANICAL PROPERTIES. MIN. P. PART AVAILABLE TENSILE LOCKING MAX. NUMBER GRIP RECOM. K BREAK-OFF DOUBLE. J MIN STRUCTURAL TORQUE. LENGTH HOLE SIZE MAX LIMITS SHEAR MIN. FAILURE MIN MIN. INCH mm INCH mm INCH mm INCH mm LBS N LBS N IN-LBS N-m INCH mm .168 4,27 +.103 +2,62. MBF3003 -5-( ) -100 .250 6,35 .370 9,40 900 4000 3150 14010 0,113 .800 20,32..165 4,19 -0,00..202 5,13 +.103 +2,62. MBF3003 -6-( ) -100 .300 7,62 .420 10,67 1400 6230 4600 20460 0,170 .850 21,59..199 5,05 -0,00..231 5,88 +.

6 103 +2,62. MBF3003 -7-( ) -100 .350 8,89 .490 12,45 1600 7120 6050 26910 0,226 25,40..228 5,79 -0,00..263 6,68 +.103 +2,62. MBF3003 -8-( ) -100 .400 10,16 .510 12,95 2100 9340 7900 35140 0,282 27,94..260 6,60 -0,00..293 7,44 +.103 +2,62. MBF3003 -9-( ) -100 .450 11,43 .535 13,59 2600 11565 9800 43590 0,339 31,75..290 7,37 -0,00..315 8,00 +.103 +2,62. MBF3003 -10-( ) -150 .475 12,06 .540 13,72 3600 16010 11350 50480 0,400 26,67..312 7,92 -0,00..347 8,81 +.103 +2,62. MBF3003 -11-( ) -150 .525 13,33 .670 17,02 4400 19570 13850 61600 0,452 29,21.

7 344 8,74 -0,00..378 9,60 +.103 +2,62. MBF3003 -12-( ) -150 .565 14,35 .675 17,15 5000 22240 16450 73170 0,452 31,75..375 9,52 -0,00. MONOGRAM. MBF3003 ( )-( )-( ). TITLE: DRAWING NO: AEROSPACE. FASTENERS BLIND FASTENER, LOW PROFILE PROTRUDING HEAD. FOR ADVANCED COMPOSITE MATERIALS. R. a TriMas company M. DOMINGUEZ 8/15/2013. DRAWN BY: DRAWN DATE: 3423 SOUTH GARFIELD AVENUE TITANIUM. COMMERCE, CALIFORNIA 90040. APPROVED BY: CHECKED DATE: (323) 722-4760 FAX (323) 727-1029. 17-0239 W. MONOGRAM. PROPRIETARY AND CONFIDENTIAL: ECN NO: REV: NOTICE: THIS DRAWING IS PART OF THE PROPRIETARY ARTICLE HEREIN DISCLOSED, OWNED BY MONOGRAM AEROSPACE FASTENERS, ANY PARTY BY ACCEPTING THIS DOCUMENT.

8 ASSUME CUSTODY THEREOF AND AGREES: CAGE CODE: 98524 09/11/17. A: THE INFORMATION SET FORTH HEREIN IS GIVEN IN CONFIDENCE AND THIS DOCUMENT WILL NOT BE COPIED OR REPRODUCED IN WHOLE OR IN PART, NOR ITS CONTENTS. ECN DATE: SHEET 1 OF 2. REVEALED IN ANY MANNER TO ANY PERSON EXCEPT TO MEET THE PURPOSE FOR WHICH IT WAS DELIVERED. B: WITHOUT THE WRITTEN CONSENT OF MONOGRAM AEROSPACE FASTENERS, THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN UNDER NO CIRCUMSTANCES WILL. BE USED IN THE MANUFACTURE OR REPRODUCTION OF THE ARTICLE DISCLOSED, AND THE DELIVERY OF THIS DOCUMENT SHALL NOT CONSTITUTE ANY RIGHT OR LICENSE TO DO SO.

9 MONOGRAM. AEROSPACE. R FASTENERS. a TriMas company APPLICABLE SPECIFICATIONS: PROCUREMENT SPECIFICATION: MBF2008. INSTALLATION AND INSPECTION SPECIFICATION: MBF2009. SPECIAL LUBE AND FINISH: MBF2002. MATERIAL AND HEAT TREAT: NUT: 6Al-4V TITANIUM ALLOY PER AMS-T-9047 STA OR AMS4928 OR AMS4967 HEAT TREATED PER AMS-H-81200 TO 95 KSI SHEAR STRENGTH. MINIMUM. MAXIMUM HYDROGEN CONTENT 125 PPM. SCREW: A286 CRES PER AMS5731, AMS5732 OR AMS5737 HEAT TREATED TO 175 KSI TENSILE MINIMUM PER AMS-H-6875. SLEEVE: 304 STAINLESS STEEL PER AMS5639, FULLY ANNEALED.

10 INSERT: ACETAL PER ASTM-D6778. DRIVE NUT: MILD STEEL. FINISH: ( - ) NUT: PHOSPHATE FLOURIDE PER MONOGRAM SPECIFICATION PS741. SLEEVE AND SCREW: PASSIVATE PER AMS2700, CONVERSION COATING OPTIONAL. INSERT: NONE. DRIVE NUT: COLOR BROWN. LUBRICANT: DRY FILM LUBE PER THE CHEMICAL REQUIREMENTS OF AS5272 TYPE I, PARAFFIN WAX, OR CETYL ALCOHOL PER AS87132. (AS REQUIRED FOR PERFORMANCE). GENERAL NOTES: TABLE II. 1. EXAMPLE OF PART NUMBER: 2ND GRIP RANGE MBF3003 ( ) - 06 - 100. DASH. MIN GRIP MAX GRIP. NO. DESIGNATES GRIP (TABLE II).