MC35i MC35i Terminal - gsgeorgia.com

1 MobileMC35iMC35i TerminalSiemens Cellular Engine MC35i AT Command Set 2 of 4445/7/04 Confidential / Released smobileGeneral NotesProduct is deemed accepted by recipient and is provided without interface to recipient s products. The documen-tation and/or product are provided for testing, evaluation, integration and information purposes. The documen-tation and/or product are provided on an as is basis only and may contain deficiencies or inadequacies. Thedocumentation and/or product are provided without warranty of any kind, express or implied. To the maximumextent permitted by applicable law, Siemens further disclaims all warranties, including without limitation any im-plied warranties of merchantability, completeness, fitness for a particular purpose and non-infringement of third-party rights.

2 The entire risk arising out of the use or performance of the product and documentation remains withrecipient. This product is not intended for use in life support appliances, devices or systems where a malfunctionof the product can reasonably be expected to result in personal injury. Applications incorporating the describedproduct must be designed to be in accordance with the technical specifications provided in these guidelines. Fail-ure to comply with any of the required procedures can result in malfunctions or serious discrepancies in , all safety instructions regarding the use of mobile technical systems, including GSM products,which also apply to cellular phones must be followed. Siemens or its suppliers shall, regardless of any legal the-ory upon which the claim is based, not be liable for any consequential, incidental, direct, indirect, punitive or otherdamages whatsoever (including, without limitation, damages for loss of business profits, business interruption,loss of business information or data, or other pecuniary loss) arising out the use of or inability to use the docu-mentation and/or product, even if Siemens has been advised of the possibility of such damages.

3 The foregoinglimitations of liability shall not apply in case of mandatory liability, under the German Product Liability Act, incase of intent, gross negligence, injury of life, body or health, or breach of a condition which goes to the root ofthe contract. However, claims for damages arising from a breach of a condition, which goes to the root of thecontract, shall be limited to the foreseeable damage, which is intrinsic to the contract, unless caused by intent orgross negligence or based on liability for injury of life, body or health. The above provision does not imply achange on the burden of proof to the detriment of the recipient. Subject to change without notice at any time. Theinterpretation of this general note shall be governed and construed according to German law without referenceto any other substantive law.

4 CopyrightTransmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents andcommunication thereof to others without express authorization are prohibited. Offenders will be held liable forpayment of damages. All rights created by patent grant or registration of a utility model or design patent are Siemens AG May 7, 2004 Document Name: MC35i AT Command Set :May 7, 2004 / ReleasedMC35i AT Command SetContents 3 of 4445/7/04 Confidential / of the document .. documents .. reference table .. notation for parameters and Command Syntax .. parameters .. AT commands on the same command line .. character sets .. alphabet tables and UCS2 character values .. and GSM data coding and conversion for SMS text mode.

5 Implementing output of SIM data to the Terminal (direction TA to TE) .. Implementing input of Terminal data to SIM (direction TE to TA) .. Interface Flow Control .. Flow Control (XON/OFF Handshake) .. Flow Control (RTS/CTS Handshake).. Result Code between Customer Application and MC35i .. and Messages .. Set all current parameters to manufacturer defaults .. Display current configuration .. responses .. Stores current configuration to user defined profile .. Set result code presentation mode .. Set result code format mode .. and numeric result Set CONNECT result code format and call monitoring .. Set all current parameters to user defined +CFUN Set phone functionality .. up the ME from SLEEP mode.

6 ^SMSO Switch off mobile AT+GCAP Request complete TA capabilities AT+CMEE Mobile Equipment Error Message Format .. CME ERRORS related to GSM GPRS-related CME CMS ERRORS related to GSM 48 ContentsMC35i AT Command SetContents 4 of 4445/7/04 Confidential / AT+CSCS Select TE character set .. AT^SM20 Set M20 compatibility mode .. Control Commands .. +CMER Mobile Equipment Event Reporting .. +CIND Indicator control .. ^SIND Extended Indicator Control .. +CEER Extended Error Location ID for the extended error report .. release cause for L3 Radio Resource (RR) .. release cause for L3 Radio Resource (RR) .. release cause for Mobility Management (MM) .. release cause for L3 Mobility Management (MM).

7 Release cause for L3 Call Control (CC) .. release cause for L3 Call Control (CC) .. release cause for L3 Advice of Charge (AOC) .. Release cause for Supplementary Service Call .. SIEMENS release cause for Call-related Supplementary Services (CRSS) .. SIEMENS release cause for Session Management (SM) .. GSM cause for L3 Protocol module or other local cause .. SIEMENS release cause for GPRS SIEMENS release cause for Embedded Extended call release +CPAS Mobile equipment activity status .. +WS46 Select wireless network .. Interface Control \Q Flow Set circuit Data Carrier Detect (DCD) function mode .. Set circuit Data Terminal Ready (DTR) function Set circuit Data Set Ready (DSR) function mode.

8 Enable command +ILRR Set TE-TA local rate reporting .. +IPR Set fixed local rate .. +CMUX Enter multiplex mode .. on Multiplex mode .. Commands .. +CPIN Enter PIN .. to do if PIN or password authentication fails?.. +CPIN2 Enter PIN2 .. ^SPIC Display PIN counter .. +CLCK Facility lock .. ^SLCK Facility lock .. 113MC35i AT Command SetContents 5 of 4445/7/04 Confidential / +CPWD Change Password .. ^SPWD Change Password .. Display product identification information .. +CGMI Request manufacturer +GMI Request manufacturer identification .. +CGMM Request model identification .. +GMM Request TA model identification .. +CGMR Request revision identification of software +GMR Request TA revision identification of software +CGSN Request product serial number identification (IMEI) identical to GSN.

9 +GSN Request TA serial number identification (IMEI) .. AT+CIMI Request international mobile subscriber identity .. related Answer a call .. Mobile originated call to dial a > <mem> <n> Originate call to phone number in > <n> Originate call to phone number selected from active > <str> Originate call to phone number in memory with corresponding field .. Mobile originated call to dialable ISDN number <n> .. Redial last telephone number Disconnect existing +CHUP Hang up call .. ATS0 Set number of rings before automatically answering a call .. ATS6 Set pause before blind dialing .. ATS7 Set number of seconds to wait for connection completion .. ATS8 Set number of seconds to wait for comma dialing ATS10 Set disconnect delay after indicating the absence of data carrier.

10 ATP Select pulse dialing .. ATO Switch from command mode to data mode / PPP online +++ Switch from data mode to command mode .. ATT Select tone dialing .. AT+CBST Select bearer service type .. AT+CRLP Select radio link protocol parameters for originated non-transparent data calls .. AT+CLCC List current calls of ME .. AT+CR Service reporting control .. AT+CRC Set Cellular Result Codes for incoming call indication .. AT+CSNS Single Numbering Scheme .. AT^SCNI List Call Number Information .. AT^SLCD Display Last Call Duration .. 168MC35i AT Command SetContents 6 of 4445/7/04 Confidential / AT^STCD Display Total Call Service Commands .. +COPN Read operator names.