Example: confidence

MECHANICAL SEAL SELECTION GUIDE - Hi-Tech Seals Inc.

AEROSPACE AGRICULTURE AUTOMOTIVE FORESTRY INDUSTRIALMARINE MINING OILFIELD PETRO CHEMICAL PULP & PAPER ISO 9001:2000 MECHANICALSEAL SELECTION GUIDEThe Complete Cross Reference forMechanical Face Seal ReplacementHow To Use This Catalogue Locate the manufacturer of the manufacturer listings are alphabetical, refer to pages 7 - 13. Identify the correct replacement Seals are arranged by shaft size from smallest to you are unable to identify the seal, it will be necessary for you tomeasure the old seal for correct identification. Refer to page 2 through 6 to identify the can measure according to the Drawing Codes for the correct dimensions. If you are unable to determine the materials, refer to pages 27 - 31 for assistance.

The Complete Cross Reference for Mechanical Face Seal Replacement How To Use This Catalogue ♦ Locate the manufacturer of the equipment. The manufacturer listings are alphabetical, refer to pages 7 - 13.

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of MECHANICAL SEAL SELECTION GUIDE - Hi-Tech Seals Inc.

1 AEROSPACE AGRICULTURE AUTOMOTIVE FORESTRY INDUSTRIALMARINE MINING OILFIELD PETRO CHEMICAL PULP & PAPER ISO 9001:2000 MECHANICALSEAL SELECTION GUIDEThe Complete Cross Reference forMechanical Face Seal ReplacementHow To Use This Catalogue Locate the manufacturer of the manufacturer listings are alphabetical, refer to pages 7 - 13. Identify the correct replacement Seals are arranged by shaft size from smallest to you are unable to identify the seal, it will be necessary for you tomeasure the old seal for correct identification. Refer to page 2 through 6 to identify the can measure according to the Drawing Codes for the correct dimensions. If you are unable to determine the materials, refer to pages 27 - 31 for assistance.

2 Using the information you have, turn to the Dimensional ProgressionChart on page 14. Locate the correct heading by shaft the matching rotary or head type and cross reference according tothe Material Codes located on page 2 to the HTS part Number listed inthe far right column of the Dimensional Progression Chart (pages 14 - 25). If seal identification is doubtful, please contact your local sales officefor more , AB:Phone: (780) 438-6055 Fax: (780) 434-5866 Toll Free ((: 1-800-661-6055 Calgary, AB:Phone: (403) 720-2856 Fax: (403) 279-2662 Toll Free ((: 1-800-830-7822 Newmarket, ON:Phone: (905) 953-9666 Fax: (905) 953-8739 Toll Free ((: 1-877-296-9412 Boucherville, QC: Phone: (450) 655-7325 Fax: (450) 655-7359 Toll Free ((: 1-866-894-73251 CONTENTSC ontents1 HTS Head & Seat Types, and Material Codes2 Seal Parts Identification - Drawing Codes3 Head Type Reference Page4 Seal Identification - Reference & Fax-Back Page5 Pool & Spa Pump Cross Reference Guide6 Pump Manufacturers Cross Reference7 - 13 Dimensional Progression Chart by Shaft Size 14 - 25 Dimension Conversions26 Seal Material Recommendation Chart27 - 31 Seal Troubleshooting Guide32 Installation Instructions and Warranty Information339211 - 41 Avenue NW, Edmonton, AB, Canada T6E 6R5 Bay 3, 5940 - 30 Street SE, Calgary, AB, Canada T2C 1X81180 Kerrisdale Blvd.))))))))

3 , Unit 8, Newmarket, ON, Canada L3Y 8Z91450 Rue Nobel, Suite 20, Boucherville, QC, Canada J4B 5H3 Toll Free (: 1-800-661-6055 Toll Free Fax: 1-800-465-5866E-mail: TYPESSEAT TYPESE lastomerWasherMetal PartsSeatSpring(buna) (carbon) (stainless steel) (316 stainless steel) (stainless steel)B CFRFE lastomer Temperature LimitsBuna 225 FEPR 300 FNeoprene 175 FViton 400 FPressure LimitationsType A& B Seals75 C, D & E Seals 200 * Viton is a trademark or registered trademark ofDuPont Performance Elastomers SEAL MATERIAL CODESE lastomersWashersMetal PartsSeatsSpringsB. BunaA. BronzeD. BrassA. BronzeE. MonelE. EPR C. CarbonE. MonelG. Cast IronF. Stainless SteelN.)

4 NeopreneM. PhenolicF. Stainless SteelJ. CeramicP. Plated SteelV. Viton *S. Tool SteelP. Plated SteelR. 316 Stainless SteelR. 316 Stainless SteelX. Silicon CarbideR. 316 Stainless SteelS. Tool SteelZ. Tungsten CarbideX. Silicon CarbideZ. Tungsten Carbide31. Cup Gasket2. Stationary Face3. Rotary Face4. Bellow5. Spring Retainer6. Spring7. Drive Shell8. Drive Ring1. Cup Gasket2. Stationary Face3. Rotary Face4. Bellow5. Spring Retainer6. Spring7. Retainer1. Cup Gasket2. Stationary Face3. Rotary Face4. Bellow5. Retainer6. Drive Ring7. Spring8. Spring Retainer1. Cup Gasket2. Stationary Face3. Rotary Face4. Bellow5. Retainer6. Drive Ring7. Spring8. Spring Retainer1. Cup Gasket2. Stationary Face3. Rotary Face4. Bellow5. Retainer6. Drive Ring7. Spring8.

5 Spring RetainerSEAL PARTS IDENTIFICATIONCup Gasket - Provides secondary sealingaround the seat and maintains the position of the seat so that it properly mates with the seal Face - The mating ring against whichthe seal face runs. Must be finished in the same manner as the rotary -Type A & B: provides a seal at the C, D & E:provides a seal at the shaft surface and a friction-drive connection between the shaft and seal Retainer -Positions and centers the spring, aiding the concentricity betweenthe spring and -Provides positive pressure for sealing between the sealing Ring - Controls fit of the bellow to the shaftfor proper friction drive. Type A Drive Ringmates against the shaft for friction - Maintains contact with the bellow andprovides positive drive to the Rotary CodesDShaft SizeD1 Seal Head or Seat ThicknessL1 Operating Height4 HEADTYPEREFERENCEPAGEHEAD TYPETYPE ATYPE BTYPE CTYPE DTYPE EJohn Crane Type 6 Sealol Type APac-Seal Type 16 John Crane Type 6 ASealol Type BPac-Seal Type 68 John Crane Type 21 Sealol Type 43 Pac-Seal Type 21 John Crane Type 2 John Crane Type 1 Sealol Type 43 Pac-Seal Type 51 EQUIVALENTFAX - BACK - PAGESEAL IDENTIFICATION REFERENCE PAGEFROM:Company: Contact: Position: Address: City Province Postal Code Phone: ( ) Fax: ( ) Other: E-mail: Web Site.

6 If you are unable to identify or locate the seal you need in this catalogue, please copy this page, fill in the requested information and fax it to us. If you are still in doubt, send a sample seal along with this Shaft/Sleeve B. Counterbore of Stuffing Box C. Bore of Gland for Stationary SeatD. Stationary Thickness E. Operating Height of Seal F. Seal To Convert from Packing to SealG. Width of Gland H. Stuffing Box Depth EQUIPMENT DATASERVICE1. Pump Mfg. Name 1. Product 2. Model Number 2. Explain if Abrasive 3. Seal Part No. 3. Percentage of Concentration SEALDESIGN1. Head Type 2. Seat Type 4. Temperature 3. Manufacturer 5. Stuffing Box Pressure 4. Mfg. Part No. 6. Shaft Speed5 FAX TO: Hi-Tech Seals INC. 1-800-465-5866 Pool and Spa Pump Manufacturers Cross Reference GuideWith HTS Replacement Part Numbers6 PumpManufacturerPumpTypeManufacturer sNumberHTSPart NumberAmericana395005201 Americana II3970121000 Bronze-Bronze3970121000 AmericanBronze-Noryl395005201 ProductsEagle3970121000 Maxim3970121000 Power-Glass3970121000 Ultra Flo3970201000 Dia CastAP-504D163 Dura-FloAP-304D1000 Ampro-Lexan-200 SeriesAP-504D163 DiaclearNoryl TurboAP-304D1000XL600AP-304D1000 Anthony04380100004547100AC-Series9250000 0309A-Series925090401000B-Series92509040 1000C-Series925000501000 Aqua FloD-Series925090401000 Dominator-High Head925000501000 Dominator-Med.

7 Head925000501000 Flo-Master910490002131 Tub-Master910490002131 ArnesonPool Sweep200 Baker-Hydro35B1178200 ColecoR32546 w/R86560501 Diaclear36100 w/35101800 Doughboy306-1006 w/306-1007200306-1002 w/306-10051000 Flint & Walling131100800 Cast IronSP-1250X-Z-2200 Max-FloSP-1600-Z-2201 Power FloSP-1500-KA2131 HaywardPower Flo IISP-1500-KA2131 Super PumpSP-1600-Z-2201 Super Pump IISP-1600-Z-2201 Turbo FloSP-1500-KA2131SP-1600-Z-2-A1521 Hydra-Bath10002 AF-Series25353-004113B-Series27223-00416 -AArgonaut38592-00201 ITT MarlowL-Series45673-20514L-Series45672-2 0978 Mardur38592-00201 SCT Series Stainless46328-002161 Steel8M 10-1203-01877 LCM-Series10-1436-00200 LCU-Series10-1436-00200 JacuzziLR-Series10-1436-00200 Magnum10-1390-04201RC-Series10-1390-0420 1 Vector10-1436-00200 Lomart 40-027.

8 029163 Muskin09-201314209-2001163 Challenger35-4545200 Dynamite35-4545200 Pac-Fab Dynamo 35-4545200 Dynatron35-4545200 Hydropump35-4001201 Pinnacle35-4545200 PolarisVac SweepP-551000120T Series31-812201220/225 Series Pre-198831-8131000225/255 Series31-812201300 Series Pre-198831-8131000 Premier 300 Series31-812201455/456 Series31-8131000500 Series31-8131000600 Series31-8131000725/756 Series31-812201P28128372AH SeriesP28300201 AquatronP28322501 Purex/HydrotechL-SeriesP28300201C-Series P28175 360P28280100 WhisperfloP283231000AJ-SeriesU109-93SS 100CC/C SeriesU109-220381CF/CFA SeriesU109-136SS1000D SeriesU109-220381 Dura-GlasU109-93SS100 Dura-Glas IIU109-372SS201 Dyna-Glas/Dyna-MaxU109-358SS201 Sta-RiteHP-SeriesU109-136SS1000JS/JTSeri esU9-358SS201JW/JWA5 SeriesU9-358SS201 JWPA Series U9-358SS201LT SeriesU109-68SS163 Max-E-GlasU109-93SS100 Max-E-Glas IIU109-372SS201 PLBC Series Pre-1995U109-93SS100 Swim-QuipXL VI/XL VIIAS-201201 Swim-Rite60-828-8131000 Vico201 Waterway1000 Wet Institute1000 PumpManufacturerPumpTypeManufacturer sNumberHTSPart NumberPUMPMANUFACTURERSCROSSREFERENCE710 0 ACH-25, 33, 50, 75, 100, ACL-755/8 ACO & BCH-25,33,50,75 100V 30210F 5/8102 2C 5/8202 BAC-7B/40110 5/81013 BAC-7VT-40150 5/8201 ACH-150, 200, 300.

9 500 3/4 ACXH-150,BCH-100,200,300 752 3C 3/4360 BCH-300,500,750,1000 1 1014 GE-7V-42120 1 150 45059207 1/2 118 0618834 5/8200 52-104-969-00-803 5/852-104-969-00-81352-104-969-00-823 359 52-104-945-00-804 5/8 642 52-105-071-01-801 5/8 358 607986 3/4647 4386862 3/4750

10 0618321 3/4703 4369006 7/8 235 4367128 1 276 52-105-275-05-808 1 277 52-105-275-01-858 1 360 52-104-969-00-806 152-104-969-00-816 357 52-113-094-00-802 1 754 52-110-870-01-809 1 791 52-110-870-01-809 1 2163 52-102-530-00-802 1 204 08-216-526-02-001 1-1/8348 71725 1-1/8355 52-104-946-00-803 1-1/8356 52-104-945-00-806 1-1/8 604 4314565 1-1/8605 52-104-945-06-803 1-1/8 137 52-106-609-03-813 1-1/452-106-609-03-817 185 52-113-592-01-801 1-1/4308 52-106-286-801 1-1/4 36152-105-609-03-813 1-1/452-104-609-03-817


Related search queries