Example: bankruptcy

MEMS TUNABLE FILTER - DiCon Fiberoptics

DiCon s mems TUNABLE FILTER is a compact 2-port device based on DiCon s proprietary mems technology. It de-multiplexes the incoming multi-wavelength signal and selects the desired wavelength channel using a tilting mems mirror as the tuning mechanism. The optical design is an extension of DiCon s proven mems switch design, and therefore offers the same durability, reliability, and stability. DiCon s mems TUNABLE FILTER is an ideal component for use in all wavelength selection and monitoring applications, and is particularly well-suited for applications requiring frequent or continuous tuning. Specifications subject to change. Copyright 2017 DiCon Fiberoptics , Inc. All rights mems durability, thermal stability, and repeatabilitySuperior optical performanceCompact form factorGaussian-shaped passbandPassband optimized for 100 GHz channel spacingCustomized passbands and tuning ranges availableI2C and RS232 control interface includednnnnAPPLICATIONSO ptical Channel Performance MonitoringROADMN oise SuppressionSignal TrackingMEMS TUNABLE FILTER OPTICAL SPECIFICATIONS mems TUNABLE FILTERSPECIFICATIONS / ORDERING INFORMATIONDiCon Fiberoptics , Inc.

OPTICAL SPECIFICATIONS MEMS TUNABLE FILTER SPECIFICATIONS / ORDERING INFORMATION DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax.

Tags:

  Filter, Tunable, Mems, Fiberoptic, Mems tunable filter

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of MEMS TUNABLE FILTER - DiCon Fiberoptics

1 DiCon s mems TUNABLE FILTER is a compact 2-port device based on DiCon s proprietary mems technology. It de-multiplexes the incoming multi-wavelength signal and selects the desired wavelength channel using a tilting mems mirror as the tuning mechanism. The optical design is an extension of DiCon s proven mems switch design, and therefore offers the same durability, reliability, and stability. DiCon s mems TUNABLE FILTER is an ideal component for use in all wavelength selection and monitoring applications, and is particularly well-suited for applications requiring frequent or continuous tuning. Specifications subject to change. Copyright 2017 DiCon Fiberoptics , Inc. All rights mems durability, thermal stability, and repeatabilitySuperior optical performanceCompact form factorGaussian-shaped passbandPassband optimized for 100 GHz channel spacingCustomized passbands and tuning ranges availableI2C and RS232 control interface includednnnnAPPLICATIONSO ptical Channel Performance MonitoringROADMN oise SuppressionSignal TrackingMEMS TUNABLE FILTER OPTICAL SPECIFICATIONS mems TUNABLE FILTERSPECIFICATIONS / ORDERING INFORMATIONDiCon Fiberoptics , Inc.

2 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 RangeO-Band (13E1)1260 to 1340 nmO-Band (13E3)1280 to 1360 nmC&L-Band1529 to 1610 nmMin IL @ Peak1< dBBandwidth @ 3 dB> nmBandwidth @ 20 dB< nmBack Reflection> 35 dBPDL< dBl Setting Error< +/- 50 pmTuning Resolution10 pmTuning Speed< 30 msOptical Power< 500 mWDurability> 1 billion cyclesOperating Temp-5 to 70 oCStorage Temp-40 to 85 oCFiber Type9/125 mm single modeELECTRICAL SPECIFICATIONSPARAMETERRATINGL atching Typenon-latchingControl TypeI2C and RS232 Vcc Voltage12 VDCP ower W Damage Threshold15 VDCMECHANICAL DIMENSIONS(Units: mm)ORDERING INFORMATIONMEMS TUNABLE FILTERMTF800 ABandwidth @ 3 dBTuning nm min13E1 1260-1340 nm13E3 1280-1360 nm15/16 1529-1610 nm Fiber Type9 9/125 mm single mode fiberConnector TypeFC FC/SPCFC/APC FC/APCN NONEP igtail LengthJacket Type1 1 MeterX Specify X Meters2B 250 mm barefiberAlso Available.

3 SC, SC/UPC, SC/APC, ST, ST/UPC, LC0337A92B Custom Tuning Range Available Upon SPECTRUM1. IL measured at 25 C. IL < dB over entire operating temperature range.


Related search queries