MERITOR

1 MERITOR pads & ROTORs caTalOguE - 2 - AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship (but not against damage caused by accident, abuse or improper installation, maintenance or repair) when such parts are used on vehicles the specifications of which have been approved by our Engineering Department. As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of charge, or take back the nonconforming parts and refund the monies paid by buyer for such parts, if found on examination by us to be nonconforming and if necessary return charges are prepaid. If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on account thereof from remittances on current accounts while claims are in the process of disposition.

2 Any expense incurred without our consent for repairs or replacement will not be allowed. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. Only genuine MERITOR replacement parts are covered by this aftermarket parts warranty. DISCLAIMER Information contained in this publication is in effect at the time the publication was approved for printing and is subject to change without notice or liability. MERITOR , reserves the right to revise the information presented or discontinue the production of parts described at any time. Manufacturers names, part numbers, symbols or other references appearing in this catalogue are used for reference for order of goods only.

3 Images are also for reference only and not to scale. Only MDP3000 series pads for heavy commercial vehicles are UNECE R90 approved. TRADEMARK The designated trademarks are registered marks of their respective owners and MERITOR and its affiliates are not commercially connected, affiliated, or associated with any of the owners of such marks. The MERITOR products presented herein are not endorsed or authorised by any of the trademark owners. COPYRIGHT All rights reserved. The MERITOR logo(s) or any part or layout of the catalogue cannot be printed or reproduced without written authorisation from MERITOR . WARRANTY / DISCLAIMER - 3 - MDP SERIES BRAKE PADS New Range The new MDP series brake pads from MERITOR set new standards in commercial vehicle aftermarket disc brake pads. The brake pads featuring the new M520 friction material are manufactured to the highest standards in a TS-169491 accredited state of- the-art MERITOR approved facility.

4 With pads to fit the most popular European truck, bus and trailer applications the MDP series now come complete with fitting kits (where applicable). 1) Manufacturing quality standard required by Vehicle OEMs worldwide. New Identity With its own new cool grey box and part numbering sequence the MDP series can be perfectly differentiated from the MDP5000 series of Original Equipment brake pads. The cool grey image is the new colour of quality for aftermarket brake pads. New Performance Not only does the new and exclusive MERITOR M520 friction material featured on the MDP3000 series of brake pads fall within the +/-15% performance requirement for UNECE R90 it also delivers pad and disc wear rates that are close to OE standards. In addition the performance characteristics of M520 are superior to the majority of aftermarket friction materials.

5 As you would expect every pad is UNECE R90 approved but more than that MERITOR have tested the pads in many additional aspects than the minimum requirement to achieve UNECE R90. R90 Performance Graph Bar MFDD OE OE -15% OE +15% MERITOR - 4 - MDP3000 SERIES FEATURES Manufacturing batch/date code away from caliper contact area to prolong traceability Unique MDP3000 part numbering MDP3 + last 3 digits of WVA number K suffix indicates fitting kit included Exclusive MERITOR M520 friction material Every pad UNECER90 approved Every brake pad is hard marked MERITOR to ensure permanent traceability SPECIALLY DEVELOPED INITIAL PERFORMANCE COATING Provides optimum initial braking performance Accelerated bedding & conditioning process Cleans brake disc surface UNIQUIE SHAPED UNDERLAYER Improved thermal efficiency Increased hot & cold shear strength Reduced risk of edge separation - 5 - TESTING Through a combination of internal and independent external testing.

6 Conducted in accordance with the ISO15484 protocol and other industry recognised test schedules, a number of aftermarket brake pad materials were evaluated alongside a market leading Original Equipment friction material. Using the Original Equipment friction material as a benchmark the new MERITOR M520 material and seven other aftermarket brake pads were tested to extremes of speed, temperature, pressure and deceleration. Brake pad quality is a question of balance and compromise between brake pad wear, brake di sc wear and consistent predictable performance. During the extensive testing the new MERITOR M520 friction material consistently delivered similar levels of brake performance, pad wear and disc wear to the benchmark OE material. The following page shows the results of these tests for M520 and six main competitors materials in terms of brake performance, brake pad wear and brake disc wear.

7 Often brake pad suppliers claim to deliver better than OE brake pad wear but from the test results you will see that although some of the competitor s pads deliver excellent pad wear it is usually at the expense of disc wear and/or brake performance. The majority of the wear and performance evaluation was carried out independently and impartially by Brake Testing International Ltd UK on behalf or MERITOR CVA Europe. Key to brake performance graphs Friction levels in this area are too high and could lead to over-performance of the brake resulting in; noise and/or brake judder, wheel lock and unpredictable brake behaviour. Friction levels in this area are too low and could lead to under performance resulting in; increased stopping distances and brake test failure. Competitor G The seventh set of pads were of such poor quality that they didn t even make it to the end of the wear test.

8 - 6 - MDP SERIES Vs ORIGINAL EQUIPMENT Throughout the tests the M520 friction material as used exclusively on the MDP series of brake pads consistently delivered comparable brake pad wear, brake disc wear and brake performance to the OE material even at temperatures in excess of 500OC. MERITOR MDP series delivers pad wear within 12% of the OE MERITOR MDP series delivers better brake disc wear than the OE Even after being operated at over 600OC the shear strength of MDP series exceeded the industry standard MDP series performance is equivalent to the Original Equipment Material. In fact the MDP series pads were certified against 7 different OE materials OE MERITOR OE MERITOR After more than 6000 brake applications at varying temperatures (up to >500oC) and varying deceleration rates and having considered every aspect of the brake pad including friction performance, pad & disc wear, friction material integrity and friction material to backplate security we finally gave the new MERITOR MDP series of brake pads are seal of approval.

9 - 7 -MAKE & MODEL DESCRIPTIONPart #DiaWHtHPart #LHWBPWT railer AxlesSKH Srs Axle with Disc Brakes - " 03 - Bremse CaliperSKH Srs Axle with Disc Brakes - " 03 - SB6, SN6, SB3745 CaliperECO Plus Axles with Knorr SB600098 - Plus Axles with Knorr SB700098 - onRearMBR50474304516010 MDP3087K24810830 MDP900124810830 ECO Plus Axles with Knorr SB7000 RearMBR51054304516010 MDP3087K24810830 Caliper, " wheels without ABSMDP900124810830SH Series Axles with Knorr SB430903 - onMDP3171K21110830 CaliperSH Series Axles with Knorr SB374503 - onMDP3165K2119230 Caliper, & Knorr SB7000 SKH series with SB4309 Caliper00 - onRearMBR580343045 Series (Non LF) Ton91 - 01 FrontMBR18323152612210 MDP3017191892310 Ton with Wabco Caliper91 - 01 FrontMBR50063123013712 MDP30171918923CF65CF65 Series01 - onFrontMDP3835K1758522 RearMDP3835K1758522CF75, CF85 SeriesFA#75, FT#85 (Knorr Caliper)98 - onFrontMDP3087K24810830 RearMDP3087K24810830 MDP900024810830F SeriesFA1000, FA100587 - onFrontMDP30171918923F45 B11/C11/C0991 - , B10, , C9/C11 Original Equipment / PartAPPLICATIONPADROTORXXXX - 8 -MAKE & MODEL DESCRIPTIONPart #DiaWHtHPart #LHWDAFF45 SeriesRoadrunner T4586 - onFrontMDP30171918923F55 , B13/B1595 - B13/B15, B13 B21LF45 - 05 FrontMDP3088K1768626 Wabco Pan 17 - onFrontMDP3126K2119330 Wabco Pan CaliperLF55 Wabco Pan Caliper03 - onFrontMBR5104375459910 MDP3126K2119330 For Wabco Pan Caliper02 - 03 RearMBR51063754514610 MDP314120510030 Please check caliper size before fitmentFor Knorr Caliper ( " rims)FrontMDP3167K24811030 RearMDP3167K24811030XF95, XF105 SeriesFor Knorr Caliper ( " rims)

10 98 - 10 FrontMDP3167K24811030 RearMDP3167K24811030 DENNISS abre Fire Engine95 - onFrontMDP3090K25011428 Dart SeriesDart MK189 - onFrontMDP3090K25011428 Trident SeriesTrident IIIF rontMDP3087K24810830 RearMDP3087K24810830 Original Equipment / PartROTORPADAPPLICATIONXXXX - 9 -MAKE & MODEL DESCRIPTIONPart #DiaWHtHPart #LHWFREIGHTLINERA rgosy / Columbia / CoronadoFor Bendix ADB225 / Knorr BremseFrontMDP3171K21110830SB4309 CalipersRearMDP3171K21110830 Bendix ESD225 FrontMDP3087K24810830 RearMDP3087K24810830 FUWA / KHITCHT railer AxlesAxles fitted with Wabco Pan 98 - onRearMBR5805377451398 MDP3126K2119330 Calipers, non ABSHENDRICKSONI ntraax AxleAxles with SB7000 Knorr Bremse Calipers80 - onMDP3087K24810830 MDP900024810830 Axles fitted with Conmet Alloy Hubs00 - onRearMBR5802430454510 MDP3087K24810830 Knorr SB4309 CaliperMDP900024810830 Axle includes high tensile bolt kit00 - onRearMBR58014304515010 MDP3087K24810830 IVECOD aily I30-8, 35-8, 35-9, 35-1096 - onFrontMBR600929022 * , 40-10, 45-10, 49-1296 - onFrontMBR600929022 * - onFrontMBR600929022 * , 59-1292 - 99 FrontMDP20221756920 RearMDP20221756920*MDP2003 is equipped with Sensor Original Equipment / PartAPPLICATIONROTORPADXXXX - 10 -MAKE & MODEL DESCRIPTIONPart #DiaWHtHPart #LHWIVECOD aily II35C11, 36C13, 35S1305/99 - * disc for non disc for , 50C15 HPT99 - * disc for non disc for *MDP2003 is equipped with SensorEurocargo60-12, 65-12, 79-10, 79-12, 79-1383 - 91 FrontMDP3024191892360 E 10, 60 E 12.